SAK-A-Like and/or off brand challenge for December?
-
You might be able to square the end of the bottle opener to turn it into a flat head, but I wonder if that would take away from it being a good bottle opener. It's a good looking Benchmade regardless.
-
Day 28
SAK-Alike Challenge
Gerber Armbar CorkDrove down to New Orleans today. On the way we stopped and "got fed at The Shed". They are quite well known in the world of whole hog BBQ.


-
Very cool, been wanting to go to New Orleans
Sent from my SM-G996U using Tapatalk
-
Oh man... now I need some pulled pork or BBQ. Well.. there goes that diet I was considering for New Years.

<u>Day 29</u>
Using the Voss to take apart a Kamp Knife and a Chinesium SAK-A-Like (that's off camera) to see if I can fix a really beat up Gerlach. Both springs broke off and lost their other half. This poor knife was rode hard and put away wet. Shame because it doesn't look half bad for a SAK-A-Like.
Thinking about using the springs from each of the other knifes to try and fix it. I'm even considering using some springs from some beat up Wengers that I have stored away. Might be an effort in futility or it might be a good practice exercise. Not sure yet of which. I need to find an exploded view of a Gerlach so I can see how the springs are shaped.

-
Day 29
More tag cutting. This time off a reusable bag for my wife.

-
Day 25
Didn't go anywhere, was in my PJs till 3:00pm [emoji38] Did put a long overdue edge on this Sage though.

Sent from my SM-G996U using Tapatalk
-
Day 26
Homemade breakfast sandwich, coffee, and Armbar. Great way to start the day.

Sent from my SM-G996U using Tapatalk
-
Day 29
SAK-Alike Challenge
Gerber Armbar CorkHotel life,,,,
Spent the day touring the French quarter in New Orleans. Not a busy knife day.

-
Day 30
Back in the Leatherman drawer with the Bond. After carrying the T4 for a month, I'm going to say that Victorinox is much better at making Leathermans than Leatherman is at making SAKs. None of the implements on the T4 measured up to their Victorinox counterparts, and after a month of fussing with it, I never got comfortable with the "thumb" deployment.
It's a shame. I really want someone else to step up to compete in the KBMT space, but Leatherman isn't there (at least not yet).
Thanks to everyone else riding along. I'll see some of you over in the Classic Challenge in a couple days.


-
KBMT? I've been contemplating getting something like a T4. I like the Free P and K series, I know they won't compare to Vic but they're not bad.
Sent from my SM-G996U using Tapatalk
-
Day 29
The Weekender’s large clip point blade is a useful classic clip point design. It can also be pinched open, which is a nice fingernail saver if using the knife frequently.
In contrast, the stubby small blade seems almost an afterthought. The point is less acute than the large blade, and it can’t easily be pinched open. Also, since each blade is on its own individual back spring, there is wasted space in the knife. All things considered, I would rather have had two large blades as a sort of modern muskrat pattern than the existing large blade + small blade.
Both blades feature nail holes rather than nail nicks. I personally find this to be neither an advantage nor a disadvantage.
Both blades also have half stops. While I see the value of having half stops on tools like screwdrivers, I would prefer no half stops on my knife blades, but it isn’t a dealbreaker.
As usual, 91 mm Vic for comparison…


-
<u>Day 30</u>
Today the Voss just went along for the ride, running errands to and fro.

-
@David Bowen said:
KBMT? I've been contemplating getting something like a T4. I like the Free P and K series, I know they won't compare to Vic but they're not bad.Sent from my SM-G996U using Tapatalk
Knife Based Multitool. I'd love to see them iterate on it a bit more, and try to find a way to make it work. Unfortunately (unlike say, the armbar) it's hard to point to one or two issues vs just needing to fix almost everything.
-
Day 27
Probably not much today, church, lunch, back to the church to disassemble some Christmas trees, then being lazy. As one can guess, I'm always prepared but my gear doesn't always get an opportunity to get used, most of its what my work is.
As for KBMT, completely agree. With the knife being the focus it doesn't seem implements get as much attention as they need to. With the Armbars, it's a bunch of things that are just "ok" in terms of performance and quality. But, I find them pretty useful even with thier shortcomings.

Sent from my SM-G996U using Tapatalk
-
Day 30
Final (for now) thoughts on the Benchmade Weekender…
Conceptually, I love multi-bladed premium steel knives. (They seem oddly hard to find though, given the positive glut of single blade premium steel knives on the market, but I digress.) And if they have some other tools in addition to knife blades, so much the better.
While the quality is typical Benchmade with no obvious flaws, I find myself less than enamored with this knife overall.
I think my biggest complaint is that the handle/closed knife is both unusually wide and oddly shaped, making it awkward in pocket compared to competitors.
The bottle opener does open bottles, but I feel like design effort was lacking here. Apparently a small flat screwdriver on the end of the bottle opener would be too much to ask. A bottle opener is also one of the easiest tools to improvise if you don’t have one on you. Perhaps Benchmade should have dropped the bottle opener and focused on improving the handle.
As mentioned in my previous post, I feel like design effort was also lacking on the small blade. Again, the quality is there but the design seems like an afterthought.
So, to summarize, I give the concept an “A”, the design a “C”, and the quality/execution an “A”.
Perhaps I’m being too harsh. But (though I got a good deal on this one) when I get a knife that retails for $200+, I expect it to be darn near perfect.
Thanks for a fun challenge everyone!


-
Day 30
SAK-Alike Challenge
Gerber Armbar CorkBourbon St. New Orleans yesterday,,,, Beale St. Memphis tonight. Heading home in the morning,,,,, whew!
This Armbar is probably my favorite of the three I carried for this challenge. Enjoyed the challenge and everyone's posts.
Happy New Years Everyone!


-
New Orleans is fun. I swear I gained 10lbs in a few days with all the food I was eating.
<u>Day 31 - Final Entry</u>
The Voss was more useful than anticipated. I expected the package opening endeavors and such, but I've never used a KBMT to change a bicycle tube tire. First time for everything. For it's final duties, the blade opened a package of napkins and the awl helped me refill my Zippo in preparation for this evenings explosive events.
Can't wait for next years SAK-A-Like challenge as I have 2 more SAK-A-Like's I'm fixing up that I would like to throw into the challenge.

Happy New Year to all! May this new year bring the best that life has to offer!
See y'all in the OFFICIAL 2024 JANUARY CLASSIC CHALLENGE!
-
@GA1dad said:
Day 30
SAK-Alike Challenge
Gerber Armbar CorkBourbon St. New Orleans yesterday,,,, Beale St. Memphis tonight. Heading home in the morning,,,,, whew!
This Armbar is probably my favorite of the three I carried for this challenge. Enjoyed the challenge and everyone's posts.
Happy New Years Everyone!
Badge request recieved and approved

-
Day 28
Got to thinking about KBMT's and decided to carry my K2 today. Used the small driver on the tool to pull tabs from the shelves while doing a reset

Sent from my SM-G996U using Tapatalk
-
Almost there David,,, see you at the finish line!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login