Sharpening methods
-

I love seeing all the amazing equipment people use. I watch a few folks online and what I am happy to see are terrific results from a variety of equipment.
There is something to be learned from those who enjoy the sharpening process. I look forward to what your experiences are.
-
I've used the Lansky guided system for a while, the Worksharp guided field sharpener and just a flat surface with some sandpaper, now I'm trying to get back into freehand sharpening again with Eze-lap diamond stones

-
I have a few different ones I play with. I have a Sharpmaker, with med, fine and x-fine stones, Lansky 4 stone Tool box, DMT diamond guided system in x-course to x-fine, DMT bench stone set and a Worksharp guided pocket one as well as the Worksharp Precision Adjust (haven't tried this one yet).
That said, one of my favorites is still a set of discontinued Spyderco 701MF stones, which I have two sets of.

-
I voted for the Sharpmaker but I mostly freehand with diamonds :D I have lots of sharpening gear and it is another hobby and collection that I don't talk about much but I do love to sharpen
I need to sit down and do some maintenance on several blades of mine and lots of our kitchen knives :ahhh -
@sir_mike said:
I have a few different ones I play with. I have a Sharpmaker, with med, fine and x-fine stones, Lansky 4 stone Tool box, DMT diamond guided system in x-course to x-fine, DMT bench stone set and a Worksharp guided pocket one as well as the Worksharp Precision Adjust (haven't tried this one yet).That said, one of my favorites is still a set of discontinued Spyderco 701MF stones, which I have two sets of.
Why are these discontinued? It's the same set I've used for over a decade
Sent from my SM-G996U using Tapatalk
-
I’ve only ever used a simple whetstone or a sharpening steel,
JR -
@David Bowen said:
Why are these discontinued? It's the same set I've used for over a decadeSent from my SM-G996U using Tapatalk
I am not sure why they were discontinued but if memory serves, it was around 2017/2018 and in 2018 was when I picked up that new set for a backup! It would have been cool if they made a holder for them and just kept producing them!
They also have a half size set called something like 702MF (not sure number is right) and I have a set of them somewhere but haven't seen them in a long time so probably lost them!
-
I use two systems. The Lansky guided stone system for a complete setup, and the Blade Medic for quick touch ups.

-
This is actually an interesting thread. Unfortunately, it looks like it is sinking a little. I might as well throw in my little contribution. I already made my vote on day one. Freehand.
I use Arkansas stones at home. I have four of them that used to be glued to a display in a store. When the store went down the tubes, I bought the things from someone for a couple of dollars. Seconds. Back of the stones were covered with contact cement, so I just put them back-to-back and made two sets of sharpening stones. Hard. Soft. Two medium types. I finish things off with a razor hone. It is what is commonly called a black Arkansas. Smooth as a piece of marble. Bought it at a flea market. Don't remember any details.
All of these things aren't very portable, so I keep a small ceramic rod in my belt pack. A piece of tubular industrial scrap. Someone gave it to me ages ago. Might post a boring photo. Maybe not. Best wishes. G
:)
[attach id=0 msg=2457678]
-
I enjoy seeing what other people are using, and amazed at how many people opt for freehand sharpening. It truly is an art, one that most folks aren't willing to take the patience to learn.
For about 15 years I was strictly a Sharpmaker guy, and from poll results on Facebook it seems 25% of those who voted are the same. I'm just now dabbling into other sharpeners and it's crazy how far down the rabbit hole one can go.
Sent from my SM-G996U using Tapatalk
-
My father-in-law gifted me the Lansky guided diamond system so that's been my go-to for several years now.
-
I mainly freehand, on pretty much most shaperning mediums. The stones I favor are Japanese water stones, but learnt on oil stones as a child.
I am one of those infuriating people that can get crazy edges on bladed tools with very little effort, and with simplistic kit.
Once I have the edge I want, I top up the edge by stropping.
I would love to try a worksharp one of these days, but not worth me buying as I don't need a system to help me.
-
Fällkniven DC4, Victorinox Diamond Sharpener, Strop, Wetpaper, Teamug...whatever is at hand.
-
gra_farmer and Shuya

While I can work on a whetstone I'm still very much learning. I also have Arkansas stones I use sometimes.
-
@Aloha said:
gra_farmer and Shuya
While I can work on a whetstone I'm still very much learning. I also have Arkansas stones I use sometimes.
I have a full set of sharpening equipment.
Including japanese waterstones, several nature stones up to 3000grit and two strops.
Was a sharpening junkie years ago. Polished hairpopping edges freehand on a stone.And at one point I realized there is simply no need for that and I began to use pocket sharpeners more often and I am happy with a good useable edge.
My blades are not dull, I can sharpen to shaving sharp with ease on these tools.
I just dont overdo anymore. -
@Shuya said:
I have a full set of sharpening equipment.
Including japanese waterstones, several nature stones up to 3000grit and two strops.
Was a sharpening junkie years ago. Polished hairpopping edges freehand on a stone.And at one point I realized there is simply no need for that and I began to use pocket sharpeners more often and I am happy with a good useable edge.
My blades are not dull, I can sharpen to shaving sharp with ease on these tools.
I just dont overdo anymore.That is me in that I do not overthink it anymore. Sometimes in sharpening I feel we overthink it. Gotta have the latest tool in the sharpening phase. When diamond stones came out, all of a sudden your 50 year old oil stone is not good enough. For me a good daily use working edge is good enough. The Lansky Blade Medic does anything I need to do. I would rather maintain my blade with a few strokes with the Blade Medic rather than let it dull and spend 10 minutes with a wet stone.
-
As steels for knives changed so did the methods to sharpen. High carbide steels do require abrasives best suited for them. Sure the steel junkies also love to have a play with equipment but there is something to it all as well.
All aspects of sharpening steel is as fun as the steels themselves. Once you have an edge you're happy with maintaining is all that really needs to be done IMO. Damage can happen even with those who use their knives lightly. Knowing how to sharpen is a good skill to have and the right equipment can make that job easier and efficient with the results expected.
-
@AzteCypher said:
My father-in-law gifted me the Lansky guided diamond system so that's been my go-to for several years now.I'm going to check it the Lansky system, it's a simplistic way get the same results as a KME or similar. One can go as Lansky all the way to Wicked Edge.
Sent from my SM-G996U using Tapatalk
-
-
@BlindFarmer said:
That is me in that I do not overthink it anymore. Sometimes in sharpening I feel we overthink it. Gotta have the latest tool in the sharpening phase. When diamond stones came out, all of a sudden your 50 year old oil stone is not good enough. For me a good daily use working edge is good enough. The Lansky Blade Medic does anything I need to do. I would rather maintain my blade with a few strokes with the Blade Medic rather than let it dull and spend 10 minutes with a wet stone.Everything does feel like a competition, who can out do who. Regular stones like oil still have thier place, I think diamonds became more common place because newer steels would take a very long time on traditional methods. The blade medic is what I think @Aloha said, easier to maintain an edge before it gets to the point you have to "sharpen", which is me in most cases.
Sent from my SM-G996U using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login