italian knife makers (MKM/Viper/Fox/maserin/lionsteel/mercury...)
-
I've looked at the Foxes a couple times, but haven't pulled the trigger yet. It helps that they're not super easy to find.
-
@SurgeUk said:
Here are my two profferings, which given that Mrs Surge is a full on Italian, is pretty poor

First an Antonini Rescue Knife* (purchased from a member) wearing a set of Ranger Beads (gifted by a member)

The second is my Fox Vulpis 5**
*- This is carried on my SAR kit if not using the Vic' RT*
*** This is a favourite of mine and would be my EDC if it wasn't for the current Vic Alox challenge*
I’m curious how you find the scissors and saw on that Vulpis.
I’m keen to pick one up. If the scissors and saw are up to basically Vic standards, it will probably be the largest model. If not, I’ll likely go with one of the slimmer options.
- This is carried on my SAR kit if not using the Vic' RT*
-
@nate j said:
I’m curious how you find the scissors and saw on that Vulpis.I’m keen to pick one up. If the scissors and saw are up to basically Vic standards, it will probably be the largest model. If not, I’ll likely go with one of the slimmer options.
I've done a quick test of the saw vs the Fx as I don't have a Vic' with a smaller saw (until someone builds me a Cadet Fx)
The Fx did better on this lightweight task, but only marginally; no doubt helped by it's extra length (I'll leave that there for PF ;))
The scissors; I've tested previously and they are at least as good as the Vic' ones but they are "really" pointy so if that's an issue you may wish to reconsider

I really like the ease of opening on the main blade (and it's shape) probably due to the cutout and the lack of the awl meaning you can gain purchase on the blade with thumb and forefinger.
I would prefer OHO (which is not an issue here) but I know that it is across Europe so, fair enough

The width is not a problem (again for PF ::)) but it feels bulkier due the lack of length (knock yourself out here PF)
Awl in awl; I like it (a lot) If they had been selling the Vulpis 4 (Px version) I'd have bought that as I really don't need a saw and the only time I've used it has been today, for this





-
@SurgeUk said:
I've done a quick test of the saw vs the Fx as I don't have a Vic' with a smaller saw (until someone builds me a Cadet Fx)The Fx did better on this lightweight task, but only marginally; no doubt helped by it's extra length (I'll leave that there for PF ;))
The scissors; I've tested previously and they are at least as good as the Vic' ones but they are "really" pointy so if that's an issue you may wish to reconsider

I really like the ease of opening on the main blade (and it's shape) probably due to the cutout and the lack of the awl meaning you can gain purchase on the blade with thumb and forefinger.
I would prefer OHO (which is not an issue here) but I know that it is across Europe so, fair enough

The width is not a problem (again for PF ::)) but it feels bulkier due the lack of length (knock yourself out here PF)
Awl in awl; I like it (a lot) If they had been selling the Vulpis 4 (Px version) I'd have bought that as I really don't need a saw and the only time I've used it has been today, for this

Thanks for a great write-up/review!
I’ve ordered one with both scissors and saw, and Ti handles of course.
-
@nate j said:
Thanks for a great write-up/review!I’ve ordered one with both scissors and saw, and Ti handles of course.
Glad to be of service

Let me know how you get on with the Px vs Fx option

-
@greenbear said:
How about one of these? The Spyderco Roadie, made by Lionsteel at Maniago for Spyderco, and very nice it is too.....Yeah, now that I knew... I couldn't help myself but get one

-
@m47mu74nt said:
Yeah, now that I knew... I couldn't help myself but get one

-
Next might be a Lucky, the dual blades are really appealing
-
@m47mu74nt said:
Next might be a Lucky, the dual blades are really appealingI don’t think you would regret it. It’s a lot of cutting capability for the size & price.
-
Viper Orso

-
very nice one too !
i've seen on instagram that next CRKT gonna be made by Lionsteel !
[attach id=0 msg=2443463]whole post :
https://www.instagram.com/p/CyCsRXKLxHB/
-
I just realized I have an Italian folder - Lionsteel, I think they call it Daghetta now, in D2 and G10, with a weird lock that (apparently) their new models don't have. I'm a Spyderco man with some Cold Steels, there are very few other brands in my rotation. But I flew to Vienna with just my carry on bag so I didn't have a knife on me. The first shop that had folders had this, and the rest was basically junk. It was simple and very solid, so when I left, I mailed it to myself. The lock is kinda gimmicky, the spring very stiff (making it practically a two-hand opener when new, it took ages to break it in), clip not very useful, G10 very abrasive, but with steel liners and 3mm stabby blade, I like it!
I also have an old double edged Fox dagger with a Ka-Bar type handle, and a Kukri Light which is decent for chopping.

-
I always loved that one, but never got it!
-
@Blunt Object said:
I just realized I have an Italian folder - Lionsteel, I think they call it Daghetta now, in D2 and G10, with a weird lock that (apparently) their new models don't have. I'm a Spyderco man with some Cold Steels, there are very few other brands in my rotation. But I flew to Vienna with just my carry on bag so I didn't have a knife on me. The first shop that had folders had this, and the rest was basically junk. It was simple and very solid, so when I left, I mailed it to myself. The lock is kinda gimmicky, the spring very stiff (making it practically a two-hand opener when new, it took ages to break it in), clip not very useful, G10 very abrasive, but with steel liners and 3mm stabby blade, I like it!I also have an old double edged Fox dagger with a Ka-Bar type handle, and a Kukri Light which is decent for chopping.
That Lionsteel looks like a cross-bar lock, ever since the patent on them expired all the manufacturers have jumped on the bandwagon.
Sent from my SM-G996U using Tapatalk
-
@m47mu74nt said:
very nice one too !i've seen on instagram that next CRKT gonna be made by Lionsteel !
[attach id=0 msg=2443463]whole post :
https://www.instagram.com/p/CyCsRXKLxHB/Is it me, or has CRKT like really stepped up their game in the last year? All the sudden the company starts making extremely high end folders and fixed blades. The are amazing for the money compared to what the customs go for. The Michael Walker collabs and then this year we have damasteel/fat carbon, what's going on at CRKT?
Sent from my SM-G996U using Tapatalk
-
@David Bowen said:
Is it me, or has CRKT like really stepped up their game in the last year? All the sudden the company starts making extremely high end folders and fixed blades. The are amazing for the money compared to what the customs go for. The Michael Walker collabs and then this year we have damasteel/fat carbon, what's going on at CRKT?Sent from my SM-G996U using Tapatalk
I’m glad to see it. I’ve long thought that, historically, they had some cool and innovative designs but went a little too cheap on the manufacturing to make them worthwhile.
-
I think so too, awesome designs over the decades but often fell short due using cheaper materials. I think what they're doing fits in with today's market, so many people are willing to drop $$$ on knives, because it's got a name connected to it like MK it's even more desirable
Sent from my SM-G996U using Tapatalk
-
This very cute "ANT," my first and only Extrema Ratio knife. It is tiny.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login