Sharpening methods
-
Fällkniven DC4, Victorinox Diamond Sharpener, Strop, Wetpaper, Teamug...whatever is at hand.
-
gra_farmer and Shuya

While I can work on a whetstone I'm still very much learning. I also have Arkansas stones I use sometimes.
-
@Aloha said:
gra_farmer and Shuya
While I can work on a whetstone I'm still very much learning. I also have Arkansas stones I use sometimes.
I have a full set of sharpening equipment.
Including japanese waterstones, several nature stones up to 3000grit and two strops.
Was a sharpening junkie years ago. Polished hairpopping edges freehand on a stone.And at one point I realized there is simply no need for that and I began to use pocket sharpeners more often and I am happy with a good useable edge.
My blades are not dull, I can sharpen to shaving sharp with ease on these tools.
I just dont overdo anymore. -
@Shuya said:
I have a full set of sharpening equipment.
Including japanese waterstones, several nature stones up to 3000grit and two strops.
Was a sharpening junkie years ago. Polished hairpopping edges freehand on a stone.And at one point I realized there is simply no need for that and I began to use pocket sharpeners more often and I am happy with a good useable edge.
My blades are not dull, I can sharpen to shaving sharp with ease on these tools.
I just dont overdo anymore.That is me in that I do not overthink it anymore. Sometimes in sharpening I feel we overthink it. Gotta have the latest tool in the sharpening phase. When diamond stones came out, all of a sudden your 50 year old oil stone is not good enough. For me a good daily use working edge is good enough. The Lansky Blade Medic does anything I need to do. I would rather maintain my blade with a few strokes with the Blade Medic rather than let it dull and spend 10 minutes with a wet stone.
-
As steels for knives changed so did the methods to sharpen. High carbide steels do require abrasives best suited for them. Sure the steel junkies also love to have a play with equipment but there is something to it all as well.
All aspects of sharpening steel is as fun as the steels themselves. Once you have an edge you're happy with maintaining is all that really needs to be done IMO. Damage can happen even with those who use their knives lightly. Knowing how to sharpen is a good skill to have and the right equipment can make that job easier and efficient with the results expected.
-
@AzteCypher said:
My father-in-law gifted me the Lansky guided diamond system so that's been my go-to for several years now.I'm going to check it the Lansky system, it's a simplistic way get the same results as a KME or similar. One can go as Lansky all the way to Wicked Edge.
Sent from my SM-G996U using Tapatalk
-
-
@BlindFarmer said:
That is me in that I do not overthink it anymore. Sometimes in sharpening I feel we overthink it. Gotta have the latest tool in the sharpening phase. When diamond stones came out, all of a sudden your 50 year old oil stone is not good enough. For me a good daily use working edge is good enough. The Lansky Blade Medic does anything I need to do. I would rather maintain my blade with a few strokes with the Blade Medic rather than let it dull and spend 10 minutes with a wet stone.Everything does feel like a competition, who can out do who. Regular stones like oil still have thier place, I think diamonds became more common place because newer steels would take a very long time on traditional methods. The blade medic is what I think @Aloha said, easier to maintain an edge before it gets to the point you have to "sharpen", which is me in most cases.
Sent from my SM-G996U using Tapatalk
-
@Aloha said:
As steels for knives changed so did the methods to sharpen. High carbide steels do require abrasives best suited for them. Sure the steel junkies also love to have a play with equipment but there is something to it all as well.All aspects of sharpening steel is as fun as the steels themselves. Once you have an edge you're happy with maintaining is all that really needs to be done IMO. Damage can happen even with those who use their knives lightly. Knowing how to sharpen is a good skill to have and the right equipment can make that job easier and efficient with the results expected.
Sharpening freehand is something I definitely need to get better at. I can get a knife sharp enough to cut paper cleaning, but shaving is just out of reach. I've got a few diamond cards that will fit in a wallet, 3 different grits. Maybe I need to practice on them, that or I can use a Sharpmaker rod. There's something very satisfying about getting something really sharp with nothing but a stone and skill.
Sent from my SM-G996U using Tapatalk
-
i use bit allkind sharpening methods, it really depends where i am and what im sharpening. i have Victorinox Dual Sharpener, Worksharp Guided Field Sharpener, Worksharp Pivot Knife Sharpener, Worksharp Precision Adjust Knife Sharpener, least 3 Diamond Rod Sharperners, 4-5 Pivot Sharpeners (unbranded) 2 x Wheatstones. mostly i use Work Shard GFS and Vic Dual Sharpener to my SAKS and MTs sometimes i use Wheatstones, for kitchen knifes and other thin blades i use mostly Vic Sharepening Steel or Worksharp Precision Adjust Knife Sharpener. For workknifes Worksharp GFS or Worksharp Pivot Knife Sharpener. Basicly for rest of my knives i use Wheatstone freehand sharpening method ( i get best result).
-
I use the Lansky guided diamond system for scary sharp edges mainly on my nicer knives but use the Work Sharp MK2 electric unit for good and fast working edges on my hard-use, less expensive knives. I also have a half dozen other systems that I toy around with on occasion.
-
@Antti Lammi @sparkyv you guys seem to have things pretty covered
I think a lot of people have more than one method, either because they have tried different ones to find what suits the situation best. Or maybe they like a variety when picking them because there not a one size fits all type of thing.Take the Smith tri-hone they use in the meat dept here at work. I can get the knives they use in the depts pretty sharp, enough to get get the job done. But it's not something I would use on some of my other knives, say like the Vosteed Griffin I'm carrying now. It's a hawkbill style blade, and I would need my Sharpmaker or a rod sharpener to properly sharpen.
Sent from my SM-G996U using Tapatalk
-
This thread got me to thinking of another from several years ago

Here is the link to that thread about sharpening gear

/post/1303124
And the link to my pic of most of my sharpening gear
I think I have a few more things now but basically the next post of mine down explains how and what I use. It is pretty much the same to this day 
/post/1308722
-
Thanks for finding that old thread.

-
I love a lot of the old threads

-
Thanks for the old thread mention, I'll check it out.
Sent from my SM-G996U using Tapatalk
-
I also need to note that I had no clue about the Spyderco Sharpmaker until I joined

So, I just had to have one from all the older members recommendations :D
I also have added a a Fallkniven DC4, some EZE branded credit card diamond sharpeners, different Arkansas stone sharpeners and probably some other stuff I have forgotten about since that picture feom the other thread. My explanation of how I sharpen is still basically the same though

-
Quite good multisharpening / smaller tool for all purpose sharpening tasks.

Lähetetty minun SM-F721B laitteesta Tapatalkilla
-
@Poncho65 said:
I also need to note that I had no clue about the Spyderco Sharpmaker until I joined
So, I just had to have one from all the older members recommendations :D
I also have added a a Fallkniven DC4, some EZE branded credit card diamond sharpeners, different Arkansas stone sharpeners and probably some other stuff I have forgotten about since that picture feom the other thread. My explanation of how I sharpen is still basically the same though

I may have gotten the Sharpmaker because of mto, don't remember. It's such a reliable system and does a good job at maintaining an edge.
@temo I've got a work sharp field sharpener on the way, curious to see how it performs.
Sent from my SM-G996U using Tapatalk
-
I actually just started freehand sharpening - before I used either the WEN Gourmet's Edge Sharpener or the Work Sharp machine. I have since moved to a Norton Stone. I also have a Hook-Eye Cutlery Grinder but have never used it. I bought it when I recently became more interested in knives and a guy on another knife forum cautioned me using it, now I am scared of it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login