Box cutter blade sharpening.
-
I took a utility knife blade to the Lansky Turnbox today. It showed improvement. The next box dispatch will be the real test.
-

Great way to also practice your sharpening. The angle is already there tho holding it is not all that easy.
-
When I very first starting working and needed a knife for work in the mid 90s, I bought one of these
Not sure if it was the one with the paint worn off or one I had lost before that
either way, I loved these knives and you could buy replacement blade fairly cheap back then. Sadly I believe that they were discontinued sometime while I was using them and the replacement blade became harder to find :ahhh
Luckily, they are pretty solid blades and instead of replacing them all the time when they became dull, I just sharpened them
you can see that there were at least 2 blade shapes to choose from and both had pros and cons
They also locked and you released them by pulling the tabs at the bottom down 

-
My sharpening job wasn't as good as I'd hoped it would be. It did okay on a few boxes, but lost the edge quickly. Maybe I need to start off on a coarse stone?

As an aside, Stanley has some fixed blade utility knives. Those would probably be great for cold-weather box dispatch.
-
I've used serrated blades in an EAB with good results. I use a box cutter with the smaller square blades at work and at home.
-
Still going strong with the EAB. I've sharpened the blade now several time as you might be able to tell.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
