OFFICIAL 2024 JANUARY CLASSIC CHALLENGE
-
Day 13, feeding the cat

-
@BPRoberts said:
Looking forward to seeing how it comes out!Slow process, and quite difficult to carve with the classic, the wood is lime.
I have a request for a hey duggie now, I'll carve that out of willow wood.


Sent from my CPH2409 using Tapatalk
-
Day 13
No action today so just a shot with a new mechanical pencil.

-
Classic went with me and a friend to the local new car show in Virginia Beach. Plenty windy, but, Classic got no action other than pocket time. Maybe later.
Z- I like that pencil. Used to use Koh-i-noor for many years.[attach id=0 msg=2458638]

-

some great stuff so far y'awl!
everybody's really keeping it classy with the classic
My throat is a bit raspy after recording some vocals in the studio recently so used the main blade to cut open some slippery elm lozenges.

today was going to order a classic in red alox but when I saw what they were going for it made me rationalize spending a bit more to get a different knife in red alox :ahhh SAK logic
stay tuned

-
Day 13--scissors only

-
Day 13
Toothpick works. No action shot.

-
<u>Day 13</u>
Spent time with the family today so the Classic SD got to take the day off.

-
I think I’m going to bow out of this challenge. Between being busier than I thought and my internet going out yesterday, I’ve gotten behind on posting and haven’t really been able to read the post of others.
-
DAY 14
So have been busy with my own classic carving challenge, my observations are as follows:
Lateral stress when doing push or chest lever cuts is hard and not practical
Obviously the handle is not long enough, even with the scissors out to do material removal
The cuts need to be small and really chip carving
Blade edge stability is poor for this task (I have sharpened the classic 30 odd times since the start of the challenge)
Blade needs to ground to a chisel edge to make wood carving possible (I'll look to reprofile soon)
Wood choice for carving is important (I moved to willow wood)
Overall this have been a humbling experience, but it is possible as can be seen with the version 2 carving request...my 5 year old is over the moon [emoji275]



-
Day 14
It’s Sunday again so it’s time for another fancy knife - the Broker.
The stainless steel scales look great, very classy and they are practical and durable at the same time - what else to ask for?
It is super thin - comparison photo with regular classic and the Swiss lite.


-
DAY 14 Green SD with emergency blade. I don't care for the pharma company ad, but it's the only one I have with that too set.

-
@gra_farmer said:
DAY 14So have been busy with my own classic carving challenge, my observations are as follows:
Lateral stress when doing push or chest lever cuts is hard and not practical
Obviously the handle is not long enough, even with the scissors out to do material removal
The cuts need to be small and really chip carving
Blade edge stability is poor for this task (I have sharpened the classic 30 odd times since the start of the challenge)
Blade needs to ground to a chisel edge to make wood carving possible (I'll look to reprofile soon)
Wood choice for carving is important (I moved to willow wood)
Overall this have been a humbling experience, but it is possible as can be seen with the version 2 carving request...my 5 year old is over the moon [emoji275]



wow great job gra_farmer!!

-
A nice Hey Duggee, Gra. I had to look up the cartoon character. I'm not sure they have Hey Duggee over here.
I needed a big funnel and a catch basin, so an empty water jug did both at one time. I started to PM Sherry yesterday, but figured she would cope with whatever was happening without my interference. I'm glad she isn't sick. Best wishes. G
:) DAY 14
[attach id=0 msg=2458763]
-
@gra_farmer said:
DAY 14So have been busy with my own classic carving challenge, my observations are as follows:
Lateral stress when doing push or chest lever cuts is hard and not practical
Obviously the handle is not long enough, even with the scissors out to do material removal
The cuts need to be small and really chip carving
Blade edge stability is poor for this task (I have sharpened the classic 30 odd times since the start of the challenge)
Blade needs to ground to a chisel edge to make wood carving possible (I'll look to reprofile soon)
Wood choice for carving is important (I moved to willow wood)
Overall this have been a humbling experience, but it is possible as can be seen with the version 2 carving request...my 5 year old is over the moon [emoji275]



Nice!

-
Day 13
Nice carving job Gra.
Z I see another Stayglow Classic
IMR a great idea for a wide mouth funnelClassic had to open a package of Cranberries as part of breakfast this morning
[attach id=0 msg=2458790]

-
Day 13:
Yesterday was even colder. Spent the day tending to the fire, checking in on the elderly neighbors, and entertaining the kids.

-
Day 14:

Sent from my iPhone using Tapatalk
-
Day 14:
We are doing some heavy equipment repair already this morning. Used the Mint SD to install some fresh batteries in my little boy's RC bulldozer so he could clean up the Cheerios his 9 month old sister dropped out of her walker in the living room.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login