Your favorite small sized multitool
-
I know a friend who carries a Kershaw Chive on his keys. To me, I don't see the point in anything bigger than a Classic or Ladybug on someone's keys. Maybe an Executive at the biggest. I have a 4" County Comm bar, which many carry on their keys, but for me, it's separate, down with the pliers in the right front pocket.
-
@ChopperCharles said:
Check this little thing out. I got two of these little guys in a big lot of multi tools. It’s branded PokeTech, is made in Taiwan, and is labeled US PAT No. Des 414092. Interesting enough, the pliers are the part that is patented. The tool load is not included in the patent.The pliers themselves are VERY similar to victorinox 91mm pliers. Just a hair larger and a hair thinner. The tool load reminds me of Vintage Coast multi tools. The opener in particular is a Coast design. The file is heat treated and quite nice, it’s a dull finish not stainless like the rest. The main blade is sharp enough to cut paper, and the serrated blade goes through paracord quite nicely. All the drivers are decent, slightly rounded corners on some but not bad at all. Some are machined after polishing and have sharp corners. The lanyard loop is redundant but everything else is useful and works well - even the 2D Phillips driver.
The pliers take a lot more force than victorinox pliers, due to the form factor obviously. They do deflect at the tips a little easier though. The teeth are well formed and grippy enough for the size. This is a super small, and yet super useful little tool. I like it!
Charles.
Update: I found more information. The Pocket Tech (not PokeTech, apparently the single T is meant to be printed twice in literature) tool is made by, or at least imported by, Stanley. "Pocket Tech" may or may not be a stanley designation. If you search eBay for "stanley max edge mini multi tool", you'll find several examples for sale. The tool was made in the late 90s. The patent was granted in 1998, but it was obviously sold while the patent was still pending.
Mine is apparently an early version, because it does not have the "US Patent No 6038735" imprint, only the "US Pat No Des 414092". The stanley-branded models have both. Not sure what the "Des" refers to.
It was also available in a gift set with a maglite solitare.
Charles.
-
Des stands for US Design Patent (see https://en.wikipedia.org/wiki/Design_patent), which is legal protection for an ornamental design of a functional item.
-
Also, the stanley branded tools appear to have less polishing. The teeth on the jaws are more sharply defined, and my tool doesn't have the text on the phillips driver.
Charles.
-
I've tried a lot of them and my favorites are
- Micra, the keychain multitool that has stood the test of time
- SAK Classic SD paired with a Nite Ize Doohickey.
The SAK Doohickey pairing has similar functionality to the Micra more or less, and weighs less.
-
Probably going to catch some hate but as much as I love SAKs, they wouldn't be my first choice in a small tool. That honor (or horror) would go to my Gerber Dime. Sure it's not the best or the prettiest, but it has all the tools I might need during the day and I don't mind abusing it a little. Both of mine have many miles on them and refuse to give up. To paraphrase Dirty Harry; a tool's got to know it's limitations. I know the Dime's and still carry it ;)
-
@charlie fox said:
Probably going to catch some hate but as much as I love SAKs, they wouldn't be my first choice in a small tool. That honor (or horror) would go to my Gerber Dime. Sure it's not the best or the prettiest, but it has all the tools I might need during the day and I don't mind abusing it a little. Both of mine have many miles on them and refuse to give up. To paraphrase Dirty Harry; a tool's got to know it's limitations. I know the Dime's and still carry it ;)
I actually carry a Rambler but used to carry a Dime and always liked it too....think we're in the minority though Charlie

-
Before there was much to choose from, I always had a small pen knife as my keyring tool. Then when the markets opened up (that is, when we started to have quality imports from US of A), I had a FRN-handled Dragonfly as my key fob. Anything smaller would feel like waste of space, if it only had the blade and nothing else.
The first real tool was the Micra for years and years. It is still very adequate, but I rotate, because I can! Then Squirt PS4, after which it has been SAKs, now I'm kinda stuck with the Alox Mini Champ, because it is such a marvel of miniature engineering. I tried going with Rambler, but I'm an Alox man through and through, and there's still no Alox Rambler (Victorinox, you listening?)
With a light and SAK my keyring is maxed out, all the rest of my tools will be in my bag, except my EDC knife.
So, short answer: Mini Champ and close second Micra.
-
@Blunt Object said:
…there's still no Alox Rambler (Victorinox, you listening?)I agree an Alox Rambler might be the ideal key chain tool.
Some Alox Ramblers were in fact produced as SFOs in fairly small quantities about ten years ago, but they are difficult to find now. Why it isn’t part of the standard lineup, I’m sure I don’t know.
-
Yeah Nate
Even better idea?
...... Now we have all the other Classic colours (Alox and cellidor) to choose from ..... the Annual Alox LE small model should be RamblerHow good would that be ? ???

-
LM Squirt P4--everything the PST has, in something that doesn't weigh a whole heckuva lot.
-
Squirt is a heck of a small powerhouse. -
@cody6268 said:
LM Squirt P4--everything the PST has, in something that doesn't weigh a whole heckuva lot.I am glad they work well for you guys.
I was initially excited about them, as they are a very pocketable size, have some useful functions, and are better quality than most of their competitors.
However, I broke the pivot on a Squirt cutting the end off a pin. I suppose it is probably my fault for pushing it outside its capabilities. It’s also possible I just got a rare lemon. Regardless, I lost confidence in the tool at that point, and no longer carry them.
-
I can fully understand that. The scissor spring was also faulty for many users on the PS4s. So far the PS4s I have are all in tact.
I went from carrying a full size MT on my off days to a Squirt and never looked back. I did have a quick romance with a Gerber Dime but that fizzled. :D
-

Although it's been on and off with a MiniChamp, lately it's my recently acquired*) Squirt Ps4 which sits in my 5th pocket.
*) I was lucky as they were still selling off old Squirt stock on the German LM site last year. Now that the sites have apparently been unified, Squirts are no longer available even here. Funny thing - and this goes to show I'm not getting any younger - I shortly thereafter found the other Squirt I knew I had owned but thought I'd either sold or lost...


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login