Show off your Sak mod's!
-
Very very nice work there
Sent from my SAK using Tapatalk
-
Thanks folks. I've learned so much from this board; hoping I can give back as I pick up some skills
-
58mm custom Spydernox Mini Champ
Made from scratch brass scales with toothpick and tweezer slots, Spyderco Ladybug blade, serrated Vic blade, wood saw made from ruler.



-
Really liking that 58mm lazar. Curious, why the Ladybug over the Honeybee?
-
@AzteCypher said:
Really liking that 58mm lazar. Curious, why the Ladybug over the Honeybee?He said that he didn't want to use something made in China, which must make everyday life challenging
Sent from my SAK using Tapatalk
-
@kimchi said:
He said that he didn't want to use something made in China, which must make everyday life challengingSent from my SAK using Tapatalk
The Ladybug blade is also just plain better, it's made with vg10, while the Honeybee is made from 3cr13. Japanese blade vs Chinese blade...seems like an easy choice, not very challenging at all.
-
@lazar said:
The Ladybug blade is also just plain better, it's made with vg10, while the Honeybee is made from 3cr13. Japanese blade vs Chinese blade...seems like an easy choice, not very challenging at all.No, that makes sense. In your separate thread you didn't mention the steel though, you just said it was because it was Chinese.
"Most of what I've seen people do, is use a Honeybee blade, but they are made in China and I didn't want a chinese blade."
Sent from my SAK using Tapatalk
-
@kimchi said:
No, that makes sense. In your separate thread you didn't mention the steel though, you just said it was because it was Chinese."Most of what I've seen people do, is use a Honeybee blade, but they are made in China and I didn't want a chinese blade."
Sent from my SAK using Tapatalk
Guess it's both, if I can avoid buying something made in China, I will.
-
My other Spydernox Mini Champ build with an older Spyderco Ladybug blade. 7 layers, regular Vic blade, serrated a Vic blade too, wood saw made from a nail file. Modified the scale to accept shortened tweezer and toothpick.



-
Finished this one yesterday with parts I had laying around. Titanium scales and nail file from a mini champ.


-
@lazar said:
The Ladybug blade is also just plain better, it's made with vg10, while the Honeybee is made from 3cr13. Japanese blade vs Chinese blade...seems like an easy choice, not very challenging at all.It never occurred to me to even consider the metallurgy of the blade. Learn something new every day.
Question, does anyone use the small blade from the 91mm in the 58mm instead of going with a Honeybee or a Ladybug? It looks like it would fit.
-
@AzteCypher said:
It never occurred to me to even consider the metallurgy of the blade. Learn something new every day.Question, does anyone use the small blade from the 91mm in the 58mm instead of going with a Honeybee or a Ladybug? It looks like it would fit.
The 91mm awl has been done, I don’t remember seeing the small blade but that would be cool.
-
Right off the bat, I would say that the shank on any 91mm is too deep to fit in a 58mm frame. A quick and dirty measure of a Spartan I have close is 12.4mm. A classic frame runs only about 14mm. No way to get a blade and spring in there without thinning things down radically. Wouldn't be much left once you finished that. Best wishes. G
:) -
@AzteCypher said:
It never occurred to me to even consider the metallurgy of the blade. Learn something new every day.Question, does anyone use the small blade from the 91mm in the 58mm instead of going with a Honeybee or a Ladybug? It looks like it would fit.
Interesting thought. I bet It could work with some grinding and drilling. Might have to drill a pivot into the Stainless Steel, would need a carbide bit. Would have to worry about thickness too. When I come across a spare small blade from a 91mm l, I'll take a look.
-
@IMR4198 said:
Right off the bat, I would say that the shank on any 91mm is too deep to fit in a 58mm frame. A quick and dirty measure of a Spartan I have close is 12.4mm. A classic frame runs only about 14mm. No way to get a blade and spring in there without thinning things down radically. Wouldn't be much left once you finished that. Best wishes. G
:)Treat it just like a Spyderco blade, drill a new pivot hole, would need to be in the steel though, carbide bit would have to be used. Most of the blade would stick out like a Spyderco blade.
-
Awesome mods - I've neglected this thread for too long.
Pic below: Blue Pliers Battle...

-
@Dutch_Tooler said:
Awesome mods - I've neglected this thread for too long.Pic below: Blue Pliers Battle...
Love that blue!
-
Thanks guys!

-
Nothing too ground breaking. I took my old Pioneer and a previous mod and added a bail. Electrician X.
[attach id=0 msg=2460868]
[attach id=1 msg=2460868]
[attach id=2 msg=2460868]


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
