ARC Owners Club
-
@Murphy Slaw said:
I used the heck out of mine yesterday due to my daughter having a frozen pipe. Twisted and pulled on screws on her skirting, and the pliers are still quite smooth.I'll admit, the only thing I've cut with the cutters are guitar strings.
I was too lazy to run to workshop to get sidecutters, so I used mine to cut my strings too! Just can't get close enough to the posts to get a close cut, so I have about 1/2 of dangler on each

-
I've used a multi-tool for decades.
I always have "danglers".....
-
Hello everyone, just a question on arc issues and help from leatherman. Have you gone through warranty return on a brand new tool or a different route? My tool came scratched up dull blade, super wobbly handles and cutters that won't cut through 12g house wiring!! I started going through warranty repair but realized that return shipping was required. I don't feel its fair to pay shipping on a damaged brand new $230 premium tool! I have an email into leatherman and its been 3days no reply back. Anyone have similar issues?
-
@2018DRZ400SM said:
Hello everyone, just a question on arc issues and help from leatherman. Have you gone through warranty return on a brand new tool or a different route? My tool came scratched up dull blade, super wobbly handles and cutters that won't cut through 12g house wiring!! I started going through warranty repair but realized that return shipping was required. I don't feel its fair to pay shipping on a damaged brand new $230 premium tool! I have an email into leatherman and its been 3days no reply back. Anyone have similar issues?I was lucky, no issues with mine.
If you bought it from a physical bricks and mortar store, maybe you can return it to them for a refund or exchange. In the UK, your contract is with them and they have a responsibility to sell goods that are fit for purpose.
Annoying though it is, at least you know Leatherman will make it right with repair or replacement as many times as it takes over the next 25 - 40 years. That should dilute the pain of shipping costs a bit.
-
I hear you on the repair replaced for 40 years (I'm an insider too) but if it cost $10 -$15 to ship it and it takes 10 times hahaha you know! It was ordered directly from Leatherman. I included the order number in the email. Guess we will see what happens
-
I really want to like this tool. Its light and seems like it will have the tool set I use most. A blade changer would've made it the absolute perfect tool but it is what it is. I will swap out the cutter for some EOD cutters as I feel these pliers don't have the burleynes to cut heavy wire anyway. But all that is irrelevant if Leatherman doesn't make it right.
Like all of you on here I have many multi tools and carry them everyday. They work flawless and came sharp and the quality was amazing! This tool seems rushed through production and parts especially the now possible metal injection molded cutter blades are a big step back for Leatherman.
I have an older surge, st300, and mut that all have the the older cutter blades. Guessing they are the 154cm blades. The ARC blades show the marks where the mold was injected. Like cheap gun internal parts. There are no grind marks at all. I would be curious if all the tools with crappy cutters show the mold marks instead being a grinded piece steel.
I don't know how much Leatherman saves by doing this but damn please stop! Charge another 50 cents on the blades and give us back the good stuff!Ok I'm sorry I'm done venting hahaha continue on
-
@2018DRZ400SM said:
cutters that won't cut through 12g house wiring!!What are you talking about?
The issues with the cutters, that I have seen, is with coat hanger wire, which is pretty darned hard in the first place, and people are shoving the wire into the void.
Copper wire is totally different, and my Arc will eat copper like me eating smoked ribs.
-
The large gap at the bottom of the cutters they don't close. All my other Leatherman close where the cutters overlap each other. If I don't lift the wire up in the cutter it leaves a thin "slab" of metal that either needs to be wiggled side to side or cut again. Makes a simple job of dropping the wire in he cutter and squeezing like every single other multi tool or dedicated pliers with cutter I own. That's all I'm saying. That's why I wouldn't even try to cut a coat hanger (like all these people in YouTube) I believe that is a job for Klein linesman's pliers. The absolute only way a coat hanger would end up in my Leatherman cutters is if I was stranded on the side of the road and had to cut that coat hanger to get unstranded hahaha but in have a bunch of tools in my truck that are designed to due just that. So it would be a pretty special circumstance.
-
But yeah to bring up coat hanger I just thought of this. Couple years ago I was in a buddy car coming back from a gun show when his rear exhaust hanger broke and started banging on rear axle.....in comes Leatherman surge and coat hanger. And it ate through that coat hanger like it was copper wire easy and smoothly. But yes I hear you, if I lift the wire up into the cutter it goes right through. What my problem is ,is that none of my other Leatherman tools have to do that. None of them have that gap. But the cutter is only 1 of the problems I have with my ARC. If that was the only problem trust me I'd have no problem tossing those cutter in the scrap pile and grinding some EOD cutters to fit it. Those are still actually grinded steel. Not MIM parts. I just added some to my st300 a couple weeks ago.
Sorry for the long replies and don't mean to drag down this area of the forum, just sharing. Like I said I want to love the tool it has a lot of potential. For the price and how they hold it as the king of the multi tools hahaha it shouldn't have these issues.
-
Really sorry to hear about the issues. I am sure LM will take care of you. As to the shipping? Maybe ask for a prepaid label? Cant hurt to ask
.As to the cutters not being able to cut coat hanger. I have a few sizes of coat hanger. I just recently cut a thiner one to use in my yard. I have cut thicker as well.
I know this is a ARC thread but my Swisstool has never had an issue with coat hanger thick or thin

Not hating or trying to start a riot


-
@Aloha said:
Really sorry to hear about the issues. I am sure LM will take care of you. As to the shipping? Maybe ask for a prepaid label? Cant hurt to ask
.As to the cutters not being able to cut coat hanger. I have a few sizes of coat hanger. I just recently cut a thiner one to use in my yard. I have cut thicker as well.
I know this is a ARC thread but my Swisstool has never had an issue with coat hanger thick or thin

Not hating or trying to start a riot

I hear you and agree 100% even though a multi tool is not the "correct" tool to cut such heavy wire it should do it with blinking an eye. I saw a video once of Tim Leatherman personally cutting such a hard wire that he made a jig to insert his tool into an step on it!! I believe it was a LM charge or wave .....either way not to talk smack but I would tend to believe if this was Tim personal tool it was probably built to higher standards being material or heat treatment than the off the line ones that are shipped out to us. But I could be wrong

-
A return label would be perfectly fine by me I didn't even think about that when I wrote the email!
-
That demonstration is very well known.
-
That looks like a TTi with old plier head (no replaceable cutters)
-
Yes it does! Looks like the one I have and carry everyday
-
Me too, except mines a Ti with old scales
-
@2018DRZ400SM said:
Hello everyone, just a question on arc issues and help from leatherman. Have you gone through warranty return on a brand new tool or a different route? My tool came scratched up dull blade, super wobbly handles and cutters that won't cut through 12g house wiring!! I started going through warranty repair but realized that return shipping was required. I don't feel its fair to pay shipping on a damaged brand new $230 premium tool! I have an email into leatherman and its been 3days no reply back. Anyone have similar issues?I called them. They asked me to send pictures and they sent me a return label and replaced with a brand new ARC. Took 2 weeks for the whole exchange. The new one arrived in perfect order. I never rely on email as those can easily get deleted or lost.
-
@MrToolJunkie said:
I called them. They asked me to send pictures and they sent me a return label and replaced with a brand new ARC. Took 2 weeks for the whole exchange. The new one arrived in perfect order. I never rely on email as those can easily get deleted or lost.That is awesome!! Thank you very much for the reply! I will call them again Monday! Every time I called there was a long wait and I hung up. This time I will wait and talk to someone.
If I might ask, what issues did you have with yours?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

