OPINELS
-
I picked up a new OPINEL no. 8 this week. I don’t know much about the wood. The handle is made of French Plane Tree. From what little bit I was able to find, the tree is native to Provence and Southern France. I believe the trees are planted as wind breaks along fields and towns. If you know more please feel free to share.
Opinels seem to multiply like rabbits.
-
Beech (wrong).
Yours is a special built, did not notice the high polish on the blade! That is a super nice version!!!!👍😎
Most models with wood handles is Beech, a tight grain light colored wood prevalent in Europe. Also, used by Mora, but stained red.
Opinel uses a clear shellac for Stainless knives and apply a yellow tint when using Carbon Steel knives.
The difference should seen in this picture.
[attach id=0 msg=2462877]The Beech is a much harder wood than I expected, as I am reshaping a N09
They (Opinel) uses other woods and chard accordingly.
Oak, Olive (beautiful grain), Walnut (dark😁), are standards. And, then I have read they use another type of wood if the handles are to be painted.I gather some of this info from the Opinel web page. 😉

-
Nothing to add about the wood I'm sorry to say. However I must say that is one very highly polished blade for an Opinel.

-
I don’t know about multiplying like rabbits, it seemed like they just fall from above…
[attach id=0 msg=2462879]
-
Still my daughter's go-to knife; No7 Opinel Outdoor Jr.

-
JonesE, I can pitch in.
Plane tree, or platane in French, is a normal part of our countrysides and our cities in the south of France.
During the 1st Empire (Napoleon I), platane were massively planted alongside the roads used by the Grande Armée to protect them from the sun and wind, and today most secondary roads are typically still lined with them. They are easy to maintain and can deliver tons of shade. Their leaves ressemble maple leaves and do not decompose easily, so walking in the streets here in autumn means walking on a crunchy layer of brown rustle of leaves.
All that to say there is a chance some of the wood used for knives could go back 200 years ; a lot are cut down when old roads and urban settings are modernized. See it as a piece of history that may very well be twice as old as the Opinel brand itself. :D -
so interesting! -
Well that was more info about the tree than the wood, which I do not see very often on knives. But the grain can be very nice indeed.
-
@Frenchephaistos said:
JonesE, I can pitch in.
Plane tree, or platane in French, is a normal part of our countrysides and our cities in the south of France.
During the 1st Empire (Napoleon I), platane were massively planted alongside the roads used by the Grande Armée to protect them from the sun and wind, and today most secondary roads are typically still lined with them. They are easy to maintain and can deliver tons of shade. Their leaves ressemble maple leaves and do not decompose easily, so walking in the streets here in autumn means walking on a crunchy layer of brown rustle of leaves.
All that to say there is a chance some of the wood used for knives could go back 200 years ; a lot are cut down when old roads and urban settings are modernized. See it as a piece of history that may very well be twice as old as the Opinel brand itself. :DWow, thanks for the response. Very detailed post and I truly enjoy reading about your experience with the tree. I hope to make it to the South of France to see this tree in person. Didn’t realize it has such a history.
-
Great pics today Gareth and Gordon.

-
-
Very nice!
I have 1 Olive Wood N08 that is luvly!
-
Thats very nice.
-
Thanks guys!

-
Olive always will be the best…
Another iconic essence here in mediterranean climates… -
-
Got a new to me Inox Beech no.8. Handle was a little groady. Had some light scratches and dings. Took an iron and damp wash cloth and got out most of the dings. Took a tooth brush and dawn dish soap to the knife and cleaned it up. Then a hair dryer to dry it off. Taped off the blade and lock ring so I don’t cut myself. I have to protect my self from stupid and constantly reminding myself to slow down. Then sanded off the old finish and scrathes with some 220. Now I applied my first coat of poly. Tomorrow I will buff it out with some 0000 steel wool, then apply another coat. I will do this till I get 3 or 4 coats on. Hopefully it will turn out nice. Trying to get it ready for next month’s challenge.
Oh, and happy French Friday!
-
Just got the Garden Tools set for next month's challenge. Opened, of course, with the Center Drive for this month's Gerber challenge.

-

I like the blade shape and color of the middle one!

A N08?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



