Please help me Id this multi tool
-
I wouldn't try to take it apart. Spray it with some WD40 and give the metal parts a good brushing with one of those brushes that have brass bristles. Should be good to go and ready to provide some more service. The wood handles are attractive. Best wishes. Gary
:) -
Everyone is right so far. Sheffield is one of many companies that buys generic knife and tool designs from China, slaps their logos on them and resells them. It's not a super high quality tool over all, but if you get a decent one, some can last for many years.
Taking it apart will likely involve drilling some rivets out and replacing them, which I don't advise. WD40 and some brushing (as mentioned above) is likely your best bet. You can also try using some unwaxed dental floss to clean out the pivots. When done I usually use some dry lube like powered graphite in the joints to help loosen them up.
Def
-
I've had some success with oiling pivots with Tuff-Glide and repeatedly working the tools open and closed, than as the goo oozes out re-applying more Tuff-Glide until it runs clear.
Some people like to immerse grotty tools in water and dishwashing liquid in an ultrasonic cleaner. I suggest re-oiling well afterwards if using this technique.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




