Leatherman Bond Owners Club
-
Quite excellent mod work by both of you

-
@JonesE said:
Great modding trichosirius!
Your picture reminded me I hadn’t posted a picture of my bond in this thread.
I wouldn’t say I have a love hate relationship with the bond. I just can’t seem to bond with the Bond. Early on, I thought that I could just change it to what I like. It first started off with swapping the blade for a serrated one from a Rebar. I am a clutz when I get in a hurry and slicing the web of my hand didn’t seem like a good idea. After that I filed the little nubs in the handle that would dig into my hand while operating the pliers. I tried swapping a charge bit driver in for the the #2 Philips bit. It works, but the pliers bind when closing. I used it like this for six months or so before I got fed up with it and threw it in the corner of my toolbox in the garage. A few months back I came upon a post in the Bond thread on BladeForums. In the post a member added the saw from a rebar and removed the lanyard ring on the clip side. So, I got out the wrenches and went to work. While I swapped back in the #2 Philips and saw, I also swapped the pliers from a Rebar. If I hadn’t already had the donor parts from a Rebar, I wouldn’t have gone to the effort to do this. I still prefer the PST to the Bond, even after the mods.
Quick note on the Rebar saw swap. The Rebar saw will sit proud of the handle when closed. I took a file and slowly took off material until it was flush with the handle. When it was to where I wanted it, I took some 220 grit sandpaper to smooth out the spline of the saw. After that was done, I disassembled and cleaned out the filings from the clip side and reassembled.
Sorry for the long winded post.
Looks awesome

I know what you mean about the file; while I really like the Bond, that thing can be a nuisance when using and opening and closing the tool. While I can avoid it, it can be a bit irritating since I’m so nitpicky with my tools.
I think I too would prefer the PST. I got the Bond precisely because I was in the market for a PST but couldn’t find a decent affordable one at the time, and the Bond was close enough.
To me the smaller the package the better, and the original just seems perfect the way it is. -
-
:So what’s the consensus on the Bond then, is it worth getting?
-
@Magic Bus said:
:So what’s the consensus on the Bond then, is it worth getting?Depends on your needs and previous MT likes and dislikes.
I am a ST300 and Rebar fan.I wanted a simple pocket carry and bought the Bond, and then later added a pocket clip. It is incomplete w/o the clip, the screw holes drove me mad.
But, the Bond caused me to look for something smaller and since it is pattern after the PST, I found one on eBay, and it was my home run tool! The first tool Tim L made is my go to, I now have multiple PSTs, some say obsessive 😁
-
Hi LC, thanks, I get what you’re saying. I am looking for something along the lines of a Bond but perhaps I’m better searching for a PST.
-
The Bond is a great tool
It depends on what you are wanting
it does have the Square shank Phillips that can be used with the Bit Adapter, which makes it much more useful
the plier head is also a bit better but form factor wise, the PST or PST II is hard to beat
the toolset of either isn't to bad either :D -
@Poncho65 said:
The Bond is a great tool
It depends on what you are wanting
it does have the Square shank Phillips that can be used with the Bit Adapter, which makes it much more useful
the plier head is also a bit better but form factor wise, the PST or PST II is hard to beat
the toolset of either isn't to bad either :DI gave in and now have one on the way, plus bit adaptor and clip
:D :D I’ll probably carry it with anything from a Rambler to a Huntsman so plenty of options. I’m really looking forward to this and more when I get it 
-
can't wait to hear your thoughts on it


-
Wise choice for accessories!
-
Thanks I’ll be sure to give my thoughts. Should be with me tomorrow hopefully

-



It looks like there has been a change to the knife blade shape, I also note that the knife blade is held into its handle by noticeable tension with the slip joint tab (arrowed). I quite like it and I’m sure it will grow on me
-
Those are two big changes. My blade handle is dated 0521.
[attach id=0 msg=2465837]
[attach id=1 msg=2465837]
I wonder when LM changed the blade?
It does look familiar, but can not put my finger where I have seen it.
My Wingman
[attach id=2 msg=2465837]


-
@LoopCutter said:
Those are two big changes. My blade handle is dated 0521.[attach id=0 msg=2465837]
[attach id=1 msg=2465837]
I wonder when LM changed the blade?
It does look familiar, but can not put my finger where I have seen it.
My Wingman
[attach id=2 msg=2465837]Yes, quite a difference! My handles are dated 08 23 and 09 23.
-
I just noticed something with the picture of the new updated Bond. Did they do away with the square hole for the blade to rest on?
-
@Magic Bus said:



It looks like there has been a change to the knife blade shape, I also note that the knife blade is held into its handle by noticeable tension with the slip joint tab (arrowed). I quite like it and I’m sure it will grow on me
Wow, that's a BIG change of blade. It's a shame, I think, that the old blade ever got past any kind of testing but I'm glad to see LM have done something about it.
-
Thanks for confirming that. I may have to order one of those. Did you order it direct from Leatherman?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
