off brand multi carry
-
Shame that i dissambled one of my fake SAK but now i have parts for mods if i ever sble to actually do it.
Luckily i have one with toolset of Ranger (scissors actually pretty good) only difference is that i have diamond file on it.

Only Tools Matters
-
First some responses: I didn't know I was setting a trend here. Antti is working on a mod for a no name brand. That's a little frightening. Reamer. I will try to do an in depth scissors post with the no name tool. Aztec. It's a good thing that I don't have your old Colonial. I would probably be outside trying to find something to make a kite with. Or making a sling shot. Hopefully not trying to climb a tree. These old things have an influence over you. Take you right back to your childhood. Got to be careful.
Now. It is nail file day. There is a little rust here and there on the parts of this knife. Springs, file, etc. Probably from apple juice and maybe an orange or two. I did mention that I used this sad excuse for a knife to cut some apples. I generally peel them too. Nail file has little cross marks to look like a file. Files usually have a slant in the rows to get a shearing cut. I cut a little nick in one thumbnail with my desktop Bijou. Simulated an annoying little burr that would catch on your clothing. Then started filing it out. Eventually it wore down the snag enough to get by. Then I tried to file a little piece of wood. Fail. It burnished the wood a little but didn't take off any file dust. Verdict: The file is a flop. The nail cleaner tip didn't take so long to test. It is thick and not smooth. No good for nail cleaning. A twig you could pull from a bush would work better. Verdict: Gigantic flop. I will leave some pix. Best wishes. Gary:o DAY 3 [attach id=0 msg=2467843] [attach id=1 msg=2467843]


-
First a small mea culpa. I remembered some other Chinese knives that I bought. Besides the ones I already confessed to. I bought a handful of Chinese Spyderco copes for somewhere less than $2 each. I wanted something to trade around on. The handles were made to look like Spyderco, but they didn't have a opener hole in the blade. Just the Spyderco hump with a plastic button for an opener. They were sharp and serrated. I pitched them in on a trade for something or other. I don't know.
No Name went with me to get a hair cut. Nobody has posted a photo of a barber shop in a long time. Best wishes. G
;) [attach id=0 msg=2467847]
-
Your barbershop reminds me of the one we used to go to in Allen, TX. Rob's barbershop. Great guy, cool old school atmosphere.
We go to another good one near us. Same atmosphere.
-
Used to be a man's domain. Not anymore. Once the old guy (Steve) finally gets to the point that he can't stand behind the clippers that is over. One customer used to leave Field and Stream, Outdoor Life (a bear on every cover), and Peterson's for me. I would just pick them up and take them home. If I forgot, the barbers would remind me. Then he died so I can't get free magazines anymore. Steve is in his 80's and works a couple of days a week to stay busy. The little girl cuts my hair. I started going to her when her husband left her with 3 small children. Might as well pay a little support. I used to pay Steve or his brother a dollar for a haircut. When no customers were around, they would pick up guitars and play. I paid the cute girl $15 yesterday. Her Dad is an old friend.
Things are changing. I talked about fishing with a local yesterday. The other men sat there and stared off into space. The effort of smiling would have killed any of them. Best wishes. G
:D [attach id=0 msg=2467899]
View from my front porch rocker. G
-
They're not what they used to be, that's for sure. That's what I like about the one in Allen and the one we go to now. Everyone's friendly, owner is always there, you get greeted going in and going out, and customers talk to each other and to the barbers.
That's a real nice view right there Gary. My in-laws have a nice view of their pasture and wooded area from their back porch. I love going over to their place. It's quiet and relaxing.
-
I used to sit right there with Dad in the evenings. Radio on. Listening to the Braves game. Commentators Skip Caray (son of Harry Caray) and Don Sutton. "The stretch.....the pitch... low and outside. Count is 1 and 1."
Best wishes. G -
The tools on this one dollar multi are stamped out and thin as can be. The scissors are flexible and you have to jigger them around to get them to seat in their slot when you close them. There is the usual hump with the nail cut on top of these things. I have personally only seen that hump on Chinese knives. I have seen knives like mine advertised for much more than I paid for mine. Buyer beware. If you want Victorinox quality, you have to pay for it. If you just want something dirt cheap, I don't really have any advice. You are on your own.
Scissors. Reamer wanted to know about the scissors, so that's what we will do. This is the normal state of the scissors when they are unfolded. At least on my knife.
[attach id=0 msg=2468011]
Lots of flex in the little thin scissors. The spring has no zip at all. When something gets a little out of line, the spring goes off to one side and the scissor blades fold themselves up. Normal state when you get things back in line is for the scissor blades to be less than half open. The spring just can't keep the blades apart. You can spread the spring a little, but it doesn't help. How do they cut?Notebook paper: I actually used some junk mail, but it is notebook paper thickness. It cut that type paper okay. Good enough to cut out a coupon or something. The blades don't spring very far apart, so it takes little nibbles.
Card stock: Again junk mail. About as thin as a playing card. The scissors made several clean cuts, then after a while started just folding the paper as the scissors flexed. Most pronounced toward tip of scissors.
Cloth: I tried a thin cotton/polyester sock. One with a hole in the heel. I tried the thinnest section. Scissors wouldn't cut at all.
Verdict: Scissors are a 90 percent fail. Best wishes. G ::)
DAY 4
-
Let's see. Might do a Phillips screwdriver story. I could post one photo and tell the tale, but words don't cost anything.... so here goes.
Paragraphs properly indented and double spaces after a period. First I had to find a phillips screw that I didn't mind turning and possibly stripping. I used a deeply set screw on a radio. Soft Chinese screw set in a plastic radio body. I tried the No Name. A pretty good fit on the screw. It cammed out. Tried again. Same failure. Screw looked a little chewed up. Screw driver showed some definite scars. The screw never budged.
I decided to see if the screw could be moved with something else. A Victorinox Tinker was near. The driver fit tight and turned the screw out easily. Tightened it back just as well. No more damage to the screw as far as I could tell or the Tinker back Phillips. Screw gave a little click as it broke free. Might have had a sealant on it. Maybe just really tight. I will post a photo comparing the two drivers. The No Name is the little one. In case you had any doubt. You can see the damage from the first time use of this tool. Thumbs down. Best wishes. Gary
:( DAY 5
[attach id=0 msg=2468183]
-
Yeah, no surprises here. At least, no pleasant ones.

At least it makes an interesting paperweight. :D -
It isn't keeping the folks at Ibach up at night, Reamer. It is better than fingernails for doing a good number of things. (Speaking of fingernails, the scissors won't trim them.) You can still clip a string off your jacket, pry the batteries from something, open mail, slice up a box for recycle, and many more mundane chores. You could do the same thing with a Vic Classic, but the little Classic costs 20 times as much.
I REALLY don't like cheap tools, but it is better than an empty pocket. I don't know if they still sell them at Dollar Tree. I haven't seen any lately. Inflation saw to it that nothing in the store is a dollar now.
I appreciate you following along and am enjoying your movie comments. Best wishes. G

-
I often wonder, how much more effort it would take to make those tools actually useful. Take the scissors for example. Could you just use some shims to line them up better? It would be an effort in futility but, it would also be an exercise in engineering. :D
-
Phillips story...
If I don't like the looks of a Phillips driver I won't waste my time, or a dollar on the tool.I've seen them at the Dollar Tree, in the past. Checked the website though and see that they're unavailable in store and on line.
-
I think there should be a bigger gap between paragraphs. :)
-
Let's do No Name can opening. The vermin haven't been fed lately, so I decided to treat them to a can of soup. Not cooked, just straight out of the can. First off I will say that I have used the can opener on the No Name knife before. I busted the kitchen appliance, and had to use some of the openers on SAKs for a while. I used the walk-it-forward Vic opener on a Tinker, the walk-it backward combo on a Trooper, and the claw type on the No Name.
First a look at the No Name opener. Claw type. No screwdriver or wire stripper. It is punched out of stock. Not sharpened at all. There is no bevel on what would be the cutting surface.
[attach id=0 msg=2468372]
Looks like it wouldn't work. Hmmm? The initial piercing of the can top is harder than it would be with a sharpened point. After you pry it through the lid, the opener works. It is small, so it takes little bites. I did open the can okay. It left a smoother cut than a Victorinox combo tool. With an opener that takes such tiny cuts with each little cycle, I generally open a can halfway and then pry up the lid to shake out the goodies. That doesn't work with everything, of course. It worked with condensed noodle soup. Can opener gets an emergency usage only pass.
:D DAY 6
[attach id=1 msg=2468372]

-
I had planned on posting a photo of the critters feasting on the noodles, but I had camera problems. I will see if I can remedy that. I went out in the black dark to fetch the camera. Singing "Don't bite me possums" to the tune of "Duke of Earl".
A note about cans. I have read comments from members who live somewhere other than the continental US. They say that there are almost no cans that aren't pull top. No need for a can opener at all. I would say that 70% or better of the cans in the stores where I shop don't have pull tops. Might be different where you live.
Some may wonder why I wasted money buying this cheapo knife. I certainly didn't need it. I have good knives. I bought it to play with a little. Of course, I could have bought a pack of shortbread cookies. Those wouldn't have lasted long.
I think I will wrap up this series of reports tomorrow and see if I can get a 7 day badge out of it. There are still a couple of tools left and the blade to worry with. Best wishes. G

-

For a dollar, it's worth it if the can opener is acceptable. How about sharpening it a little? Just a hint of a bevel would improve the performance a lot.
Down here there are still many cans that need an opener. Most are indeed ring-pulls, but not all. What if someone brings you a non ring-pull? Or if you can't find ring-pull cans at the supermarket? And sometimes the ring breaks, so you need an opener anyway.
-
I actually thought of filing a little bevel on the can opener. However, it would likely mean expanding this 7 day exercise in futility into the 15 day version. Could cause fatigue for the reader, not to mention IMR. I prefer to dole out my tiresome reports in smaller doses.
Might as well do a DAY 6, part B since I am already writing. The corkscrew might be useful for something. It is soft as annealed wire. A child could bend the thing easily into all sort of distortions. I don't have anything with a cork in the house. You can see the little thing in the photo of the soup can. It has three and a half turns, using the Victorinox corkscrew counting method. It might pull a cork. Might not. Best wishes.

-
I long for the days when we had to use can keys and can openers. Pull tabs... blah... so boring. :D
You could use the can opener to dig into a small log so then you can use the off brand as a handle.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login