Roxon Flex: User Configurable, Open Source MT
-
-
I certainly like the looks of that.
If I was 30 years younger I'd definitely be on the lookout. -
We were approached by the team at Roxon to check out a pre-production version of the new Flex model. I know we're not the first one's to have the opportunity but I couldn't turn it down, after all were the #1 source for everything multitool [emoji41]
I have recorded a video of the unpacking and assembly, since the tool was empty of implements. When I go to town next I'll get this uploaded and put the YouTube link here and in the review section. I wish my internet wasn't so crappy, but for now all I can give you is photos.
Any questions you guys have let me know, I'd be more than happy to answer them. Overall I'm super impressed by everything. This thing is going to be a hit with lots of folks.





Sent from my SM-G996U using Tapatalk
-
That is going to sell like hotcakes

-
Sent from my SM-G996U using Tapatalk
-
Is it just a trick of the light, but the tools look kinda thin. How much torque can for example a 2D Phillips driver take? The more I've used multitools, the more I've become aware of their limitations. The answer is probably "enough", but I've managed to twist and bend a few MT parts in my time...
It's hard to tell without the tool in hand. Does it give you that solid feel that it can take it?
-
Where is it built?
-
I'm looking forward to seeing what tools modders and creators make for it. Full Phillips, t-shank holders, bit drivers, Damascus blades, carving blades.

-
@Blunt Object said:
Is it just a trick of the light, but the tools look kinda thin. How much torque can for example a 2D Phillips driver take? The more I've used multitools, the more I've become aware of their limitations. The answer is probably "enough", but I've managed to twist and bend a few MT parts in my time...It's hard to tell without the tool in hand. Does it give you that solid feel that it can take it?
It does feel quite solid, it's not cheap feeling at all. I don't have an calipers to check with (if I keep doing video reviews I think I'll need them) and I think I can weigh it later today.
The Philips is indeed thick and 3D in nature. I did mention in the video there's very slight side of side play, after playing with it some more there slight up and down as well. Nothing out of the ordinary from some of the other tool companies out there.


Sent from my SM-G996U using Tapatalk
-
@Murphy Slaw said:
Where is it built?It's made in Yangjiang China
Sent from my SM-G996U using Tapatalk
-
@ReamerPunch said:
I'm looking forward to seeing what tools modders and creators make for it. Full Phillips, t-shank holders, bit drivers, Damascus blades, carving blades.
Right! The possibilities [emoji41] modders already do what they want with multitools, what more can they do with a platform like this. The Phillips is full, but I would love a 1/4 driver.
Sent from my SM-G996U using Tapatalk
-
I don't know why this exists, if it wasn't for this I could have 4 long tools with smaller ones in the middle. All the tools are excellent quality and came very sharp. They're not thin, or cheap.

Sent from my SM-G996U using Tapatalk
-
Another tuber (wealljuggleknives) was sent a torx key with his Roxon. Maybe the blade play can be eliminated? I can't see how quick change and zero play would be possible without adjustment of the pivot screw. And if that is required -> what was the point of quick release?
My tip to Roxon would be: make the pivot screw easily openable (from one side; it doesn't have to be removable). One twist - open, change tools; one twist - closed and no play. Why did you go this finicky lock button road anyway?
Now a tip to Leatherman: make the Rebar pivots easily openable, start selling drop in tools, and watch the Benjamins start rolling in!
-
I wasn't given a torx, which I think is for the wire cutters. I'll see if I can adjust the pivot and if that helps at all. I like your idea, would keep the extra moving parts out of the way where you hands go.
I do think with two companies now doing this it's only a matter of time before one of the big guys do something similar.
Sent from my SM-G996U using Tapatalk
-
I did use a T8 and tighten up that side and it has no play side to side.
Sent from my SM-G996U using Tapatalk
-
The Roxon Phantom and Phantasy have removable handle scales, to make the blade able to be removed. And it is quick. Maybe this design could be expanded to allow an entire handle's tools to be removed? And it would limit play.

-
@David Bowen said:
I don't know why this exists, if it wasn't for this I could have 4 long tools with smaller ones in the middle. All the tools are excellent quality and came very sharp. They're not thin, or cheap.
Sent from my SM-G996U using Tapatalk
That looks like the detent for the pliers. A shame they went with that design. The Roxon Phantom has ball detents for the pliers, and they're fine.
-
Like with any new tool, the first generation will be a learning curve and they iron out the bugs for future versions.
Sent from my SM-G996U using Tapatalk
-
@ReamerPunch said:
The Roxon Phantom and Phantasy have removable handle scales, to make the blade able to be removed. And it is quick. Maybe this design could be expanded to allow an entire handle's tools to be removed? And it would limit play.
I don't know what steel Roxon uses on thier implements, isn't it like 3CR or something similar
Sent from my SM-G996U using Tapatalk
-
I think so, 3CR is like 420 from what I read.
After using this for a bit I like it. I wish it had a sheath, and that maybe the clip was on the other handle but good otherwise. I got to thinking how you can make a TSA/UK friendly multitool very easily. Heck you can leave out the knife, pack it in your luggage and put the blade back in when you get to your destination. Or, maybe just use the hobby blade attachment, might be easier. The versatility and ability to mold it to different situations is very handy. I've been swapping stuff in and out trying to find the right setup for me. I don't think there is one, but the ability to change it based on daily needs is really nice.
Today I'm going to do group photos with other multitools and do a weight comparison so people can get an idea what it's similar to.
Sent from my SM-G996U using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
its been done so execution will be whats most important.