Four Layer Friday
-
It is raining with temps in the high 40's. Fahrenheit, of course. I couldn't do an outdoor photo, so I used whatever was handy. What is the tactical pen looking thing in your wife's kit, Jeff? Looks like she is well equipped. I'm going to have to get a little flashlight somewhere. Best wishes. G

-
Gary - High 40’s here too, but, clear. Rain Tomorrow.
It is a tactical pen with a glass breaker on the other end. When my best friend passed, his wife gave me his bug-out bag. This pen was inside. No idea where he got it. Here is a picture. Wife’s small light is an olight 1R2Pro. It is a “2 speed” rechargeable.
I have streamlight Defender LED and a Streamlight Nano.Cute story (to me) about the Nano: where I used to work required us to carry a flashlight as an emergency egress light should the construction lighting in the ship fail. Between note pads, tape measures, ear muffs, gloves, hard hat, etc. I put the Nano on my lanyard next to my ID badge. Standard issue was a 2 or 3 d cell light. A few times I got “challenged” by either safety or some level of management about “where is your egress light?” Their first reaction to the Nano was “thats nfg” until they saw the light brightness. One even escorted me off the ship with the lit nano in his hand and learned about the run time. He then decided he needed information on where to get one.
[attach id=0 msg=2467077]

-
Yes, I may have to check out the flashlights. By the way there is a flashlight carry badge available if you decide you would like one. I don't know why I said it was in the high 40F range here. It started out as just below 40F today and still isn't quite up to 40F. Ice accumulation for higher elevations in the county have been predicted. I liked the flashlight story. Best wishes. G

-
I’ll look into the flashlight badge soon. I am a bit of a flash-a-holic, too. Ooops, clarifying the flashlight kind.
My next target is the 111mm level 1 badge. Having trouble sizing the photo so the forum will accept it.
-
I've got my Farmer X along today

-
MTSAK-Nice looking.
-
Some excellent shots here awl

Not posted here for a while so here's my FOX Vulpis (non SAK, but still 4 layers) helping open my new work boots


-
This Tradesman is in need of a bit more TLC but all the tools are clean and snappy now.

-
Nice looking knives. Pretty Fox and a great old classic Wenger. It is Spartan Saturday again. Might have to load a photo. Best wishes. G

-
No hook on this Huntsman.

-
Not too long ago I thought the Huntsman was the only SAK I would ever need. I started buying them and wound up with 6. One is in wife’s “ready bag”. Two are kept in other convenient places. These three are “spares”. Then I started diversifying.
[attach id=0 msg=2469482]

-
Get out your tackle box and let's all try this tip. Pick the cleanest hook you can find. If you have to scrape worm guts off one, then look around a little more. Okay. All together, as I talk us all through this... Aaaah alllawa wawala gagaoah.... I just realized I couldn't talk with a fish hook on my tongue. Just look at the picture instead. Best wishes. G
;) [attach id=0 msg=2469490]
-
Gary - things seem a bit fishy. Hope all is well.
-
There seems to be lots of putting a fly line in your mouth for one reason or another. This was just one. It is common for someone to put the knots in their mouth when you are tying them. The lube lets you cinch the knots down tight.
This might be about the last fishing photo that I use here. I started to post something with the page about how to tie a Bimini twist, but decided not to. There is no way anyone would ever learn that knot without watching someone tie it. Not really complicated, just impossible to describe. Best wishes. G

-
@Jeffjeeptj said:
Not too long ago I thought the Huntsman was the only SAK I would ever need. I started buying them and wound up with 6. One is in wife’s “ready bag”. Two are kept in other convenient places. These three are “spares”. Then I started diversifying.[attach id=0 msg=2469482]
There aren't many problems a Hunstman won't solve. Nice picture!
-
Interesting technique….I’m not sure I would trust myself manipulating a hook poised on the tip of my tongue. Things might get painful pretty quickly.
I’m happy to report that my replacement yellow scales arrived, so I was able to replace the yellow front scale on my Explorer that got cracked a few weeks ago. I wasn’t able to post for Four-Layer Friday yesterday because we lost power during a storm here in a Houston.

-
@hsherzfeld said:
Interesting technique….I’m not sure I would trust myself manipulating a hook poised on the tip of my tongue. Things might get painful pretty quickly.I’m happy to report that my replacement yellow scales arrived, so I was able to replace the yellow front scale on my Explorer that got cracked a few weeks ago. I wasn’t able to post for Four-Layer Friday yesterday because we lost power during a storm here in a Houston.
I’ve also been carrying an Explorer around pretty consistently for a the last 10 days or so, after I gave up on the Deluxe Tinker (I never seem to need the pliers).
It’s a great model and the in-line 3D Phillips is sometimes the only thing that will do! I wish it were longer though. It’s too short to work on most door knob screws, for instance, because you can’t get past the knob - the thickness of the SAK isn’t doing it any favors there either. Even in the 90 degree configuration, it doesn’t work very well for that. Oh well, Rambler to the rescue in that case!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
