off brand multi carry
-
Let's do No Name can opening. The vermin haven't been fed lately, so I decided to treat them to a can of soup. Not cooked, just straight out of the can. First off I will say that I have used the can opener on the No Name knife before. I busted the kitchen appliance, and had to use some of the openers on SAKs for a while. I used the walk-it-forward Vic opener on a Tinker, the walk-it backward combo on a Trooper, and the claw type on the No Name.
First a look at the No Name opener. Claw type. No screwdriver or wire stripper. It is punched out of stock. Not sharpened at all. There is no bevel on what would be the cutting surface.
[attach id=0 msg=2468372]
Looks like it wouldn't work. Hmmm? The initial piercing of the can top is harder than it would be with a sharpened point. After you pry it through the lid, the opener works. It is small, so it takes little bites. I did open the can okay. It left a smoother cut than a Victorinox combo tool. With an opener that takes such tiny cuts with each little cycle, I generally open a can halfway and then pry up the lid to shake out the goodies. That doesn't work with everything, of course. It worked with condensed noodle soup. Can opener gets an emergency usage only pass.
:D DAY 6
[attach id=1 msg=2468372]

-
I had planned on posting a photo of the critters feasting on the noodles, but I had camera problems. I will see if I can remedy that. I went out in the black dark to fetch the camera. Singing "Don't bite me possums" to the tune of "Duke of Earl".
A note about cans. I have read comments from members who live somewhere other than the continental US. They say that there are almost no cans that aren't pull top. No need for a can opener at all. I would say that 70% or better of the cans in the stores where I shop don't have pull tops. Might be different where you live.
Some may wonder why I wasted money buying this cheapo knife. I certainly didn't need it. I have good knives. I bought it to play with a little. Of course, I could have bought a pack of shortbread cookies. Those wouldn't have lasted long.
I think I will wrap up this series of reports tomorrow and see if I can get a 7 day badge out of it. There are still a couple of tools left and the blade to worry with. Best wishes. G

-

For a dollar, it's worth it if the can opener is acceptable. How about sharpening it a little? Just a hint of a bevel would improve the performance a lot.
Down here there are still many cans that need an opener. Most are indeed ring-pulls, but not all. What if someone brings you a non ring-pull? Or if you can't find ring-pull cans at the supermarket? And sometimes the ring breaks, so you need an opener anyway.
-
I actually thought of filing a little bevel on the can opener. However, it would likely mean expanding this 7 day exercise in futility into the 15 day version. Could cause fatigue for the reader, not to mention IMR. I prefer to dole out my tiresome reports in smaller doses.
Might as well do a DAY 6, part B since I am already writing. The corkscrew might be useful for something. It is soft as annealed wire. A child could bend the thing easily into all sort of distortions. I don't have anything with a cork in the house. You can see the little thing in the photo of the soup can. It has three and a half turns, using the Victorinox corkscrew counting method. It might pull a cork. Might not. Best wishes.

-
I long for the days when we had to use can keys and can openers. Pull tabs... blah... so boring. :D
You could use the can opener to dig into a small log so then you can use the off brand as a handle.
-
I still have a spam can key.

That was a fun tool to use. I'd buy cans with the key if I had the option. :D -
Well it's the day we have all been waiting for. Day 7 and the end of IMR's No Name affair. First a word or two about the build and various parts of the No Name. The scales are crimped on to the sides of the knife with little tabs. Something like an old Imperial or other shell knives. The springs are all light in their action. Not much snap. They do keep the blades closed and have gotten a little rusty from apple juice probably. Likewise with the tools except for the blade.
The blade is marked stainless and probably is. It is thinner than the other tools. Only a silly millimeter thick at the tang. It came dull as a My Mother the Car re-run. The blade has been polished into a series of ripples and is slightly hollow ground. The nail nick is on the off side of the knife, so it makes it easy for a southpaw to open. It will sharpen some. Cut some paper for a few slices. Then it dulls out really quickly. Adequate for opening mail or potato chip bags or slicing kitchen ingredients. The blade and scissors wobble a little when they are open.
I will leave you a blade type screwdriver comparison. The small flathead is only 3mm at the tip, so you would think it would only be good on small slotted screws. Mmmm..... no. I tightened some loose doorknob screws with it. Worked okay. Then tried some smaller screws. There is no taper in the tip of the driver, so it wouldn't engage the smaller screws I tried. Blade is too thick. It is almost a square now. There is a cap-lifter, but no bottles with caps in the lair of IMR. Looks like it would work.
There is a small key ring. Vic counts them as a tool, so I will too. No rough spots to hang in your pocket. Light weight. I looked up some of these tools and the seemingly identical ones with 3 little plastic crescents on the scales. Some sellers say they are 'vintage swiss army knives' or 'a life-saver in emergency situations.' Prices range anywhere from $10 to $20. Often with a discount to show you how much of a bargain it is. It wasn't anything to jump up and click your heels about when I bought mine for a buck. No country of origin stamp anywhere. The package was marked Made in China if I remember correctly.
I talk to everybody. Strangely enough, lots of people speak to me. A young woman turned to me in line at the Dollar Tree a while back and showed me what she was going to buy for a stocking stuffer. A one-piece tool. Square stainless thing with the usual hooks and slots and ruler markings. Said she thought it might be useful and a nice present. What did I think? I answered sure it was.
After today, I will get to put my new Opinel in a pocket. I think it might be useful and a nice present too. Best wishes. G
:D DAY 7 [attach id=0 msg=2468525]
Screwdriver and cap lifter next to Tinker.
[attach id=1 msg=2468525]

-
I enjoyed following along. Who knew that the humble No Name tool would provide such entertainment and food for thought. For just a dollar, it's hard to say it is not worth it. Thanks for taking the time to share your thoughts and observations.

-
Thanks to everyone who followed along and helped make this thread tolerable. The No Name is back in plain view on my computer table. Ready to peel an apple if I ever get any more. I just did the change to the new daylight time settings this morning. Dropped the last working clock in the house. We will see if it has been ruined for good. Best wishes. G
:D -
Thanks for the fun ride along, Gary.
While DT certainly has some useful items I still don't believe that I'll ever have one in my cart. -
I actually started out to do a 15 day carry of an off brand multi tool and use a Swiss+Tech model. I wondered if Swiss+Tech could be considered an off brand? I might just do it after all. Depends on how bored I get and whether or not the weather improves enough to work outside more. I had more than a dollar's worth of fun from this exercise.
Thanks to the administrator who pasted the new badge on my rack. What do you think? Is Swiss+Tech an off brand? Best wishes. G

-
@IMR4198 said:
I had planned on posting a photo of the critters feasting on the noodles, but I had camera problems. I will see if I can remedy that. I went out in the black dark to fetch the camera. Singing "Don't bite me possums" to the tune of "Duke of Earl".
A note about cans. I have read comments from members who live somewhere other than the continental US. They say that there are almost no cans that aren't pull top. No need for a can opener at all. I would say that 70% or better of the cans in the stores where I shop don't have pull tops. Might be different where you live.
Some may wonder why I wasted money buying this cheapo knife. I certainly didn't need it. I have good knives. I bought it to play with a little. Of course, I could have bought a pack of shortbread cookies. Those wouldn't have lasted long.
I think I will wrap up this series of reports tomorrow and see if I can get a 7 day badge out of it. There are still a couple of tools left and the blade to worry with. Best wishes. G

Badge awarded

-
Thank you. What do you think, Surge? Is Swiss+Tech an off-brand? I might post some fur-bearing night visitors yet. My camera was down for a while, but I think I have it fixed now. Best wishes. G

-
Off-brand means not LM, Vic, Wenger, SOG, Gerber. J hot my Off-brand badge with a Roxon.

-
@ReamerPunch said:
Off-brand means not LM, Vic, Wenger, SOG, Gerber. J hot my Off-brand badge with a Roxon.
What about Imperial, Colonial, and Imperial Schrade Co (ISC). Asking for a friend. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login