Gerber Mp600 owners club ;)
-
Welcome aboard BigShep! I'm not the guy to talk to about modding out an MP but they'll be here soon. It's great to have you here and nice MP!
-
Welcome BigShep and, let me say that's one nice "hand-me-down" you've there! As for the blade, it might look flimsy but, it is quite good and sturdy for a multi tool knife; perhaps give it a chance?
If after all you'd like to still replace it, your "plug in" options are: newer/later MP blade (Wharncliffe style; thicker, and same choices between combi blade and plain edge ones. Although they're supposed to be the same alloy, does not have the same edge retention as yours), an earlier Multi Lock or same vintage plain edge or fully serrated blade; a Diesel blade might work, as it looks to be the same as in the discontinuedDETSight Tool(ST) model or in the Snap On version. Another option is to go bladeless, as I did a clone of a Bladeless model by replacing the combo blade with asmalllarge flat driver (and the replaceable cutters head; here it is /post/2456899). After this, I think your options are custom ones. Good luck and again, welcome!
-
@Juan el Boricua said:
Welcome BigShep and, let me say that's one nice "hand-me-down" you've there! As for the blade, it might look flimsy but, it is quite good and sturdy for a multi tool knife; perhaps give it a chance?
If after all you'd like to still replace it, your "plug in" options are: newer/later MP blade (Wharncliffe style; thicker, and same choices between combi blade and plain edge ones. Although they're supposed to be the same alloy, does not have the same edge retention as yours), an earlier Multi Lock or same vintage plain edge or fully serrated blade; a Diesel blade might work, as it looks to be the same as in the discontinued DET model or in the Snap On version. Another option is to go bladeless, as I did a clone of a Bladeless model by replacing the combo blade with asmalllarge flat driver (and the replaceable cutters head; here it is /post/2456899). After this, I think your options are custom ones. Good luck and again, welcome!
Thanks for the info! I will look into the options you mention. I will likely leave it as it is as I usually carry another blade anyway and this one doesn't hurt to leave in it's original home.
The person who gave me this one was tired of the "flimsy" case (velcro was old). So he didn't carry it anymore. I was happy to adopt it.
Sent from my SM-S908U using Tapatalk
-

ML600 work EDC. I previously carried a BN gen 2 or 3 original tool and i’ve toyed around with switching this head to a BN as i prefer it and this is usually backed up with a MP400 in the waist pack
Sent from my iPhone using Tapatalk
-

My only 600’s. A BN pro scout is being considered though to round out the scissor 600’sSent from my iPhone using Tapatalk
-
Not a bad couple to have though!

-
I'm a little afraid to leave thoughtless comments, because... The administrator decided to award me the title of spam for one post, but your couple is not bad! :)
-
@madfishcat said:
I'm a little afraid to leave thoughtless comments, because... The administrator decided to award me the title of spam for one post, but your couple is not bad! :)The spam box is default until you specify the country you're from in your profile. You can go to your profile page and select the country and then it will show a flag instead of the spam box.
Welcome to the forum

-
Ha! :)
I apologize to the admins for thinking badly about them for a couple of minutes. SteveC sincere thanks!From the last one, I took 600 stainless blunt nose on old stamps for only 45$. By the way, the washers from the Chinese counterfeit fit perfectly with the original, only the hole needs to be drilled out a little. Let's see what condition it's in, but from the photo it looks like everything is fine
-
Nice collection there MpNut; I like them both (one for its rarity, the other for the utility).

-
Bladeless/Leatherman combo; used today for installing a wall tray. [attach id=0 msg=2469915]

-
That's a great setup Juan!
-
Got another MP 600 for the collection; a DET/EOD. Originally it was going to be a for-parts tool but, the only "bad thing" it had was that it was missing one of the tool lock sliders. Well, having a couple from previous for-parts MP's and since they both shared the same design (FYI/PSA: the Sight Tool shares the one from the Snap-On and Diesel models) ... I think it came out pretty good!
[attach id=0 msg=2477964]
-
Great grab Juan!! That's one in my bucket list of 600's :D
-
Thanks, Barry!

-
Here is my newly modded MP600, dropped file and added Victorinox PX awl to it. Now i may need to drop that u-shank what i earlier added for solid saw and add file back.
Since u-shank holder is thick i should be able to add saw and file to it without those interfere pliers closing.

Only Tools Matters
-
Tested to remove u-shank holder and add saw and file but it failed since there wasnt enough room for pliers to close. maybe i need to remove serrated blade to file and change pe-plade for combo blade. now i just need to find
u-shank saws to it so i could have regular saw or keep it as it now and live without file on my MP600 (maybe i pair it with VIC Ranger). Now i have one custom saw for Gerber but i have no place to add it since i dont wanna mod my BO MP600.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D