What Did You Use Your Multitool For Today?
-
@HarleyXJGuy said:
Changing the base plates on some new magazines.
Will those give you an extra round or two?
Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
I used the Vic combo tool to peel some fruit

[attach id=0 msg=2470215]

-
@old Lefty said:
Will those give you an extra round or two?Lähetetty minun SM-T515 laitteesta Tapatalkilla
Well sorta.
The magazine is for a slightly larger version of my pistol.
The base plate you see on the magazine fills the gap that is created. For look and to prevent over insertion which can damage the magazine or weapon.
Forgot to add the normal capacity is 15 rounds but these are 17 rounds.
-
Thankfully I had both of them in my EDC bag because I needed both the center drive and the dual force to fix an emergency brake on a mobility scooter that was defaulting to locked. I was unsuccessful and will have to bring the scooter to a professional.
I didn't have enough hands to take a picture of the action so here's an older pic of the pair.
-
@HarleyXJGuy said:
Here is a photo to better illustrate how it fills the gap.
Ok. Thanks. Seems flush fitting solution
Looks like it also gives a bit more lenght for grip if needed -
Used the marlin spike on my Vic Skipper to open a package.
-
Water is plain terrible here on this district of Kyiv and I have to regularly clear an aerator on the water taps because it gets clogged. This time I used a Spirit awl instead of a SIM eject tool from my iFixit Pro Tech Toolkit just out of curiosity - even the very tip of an awl is a little thicker, so we’ll see if that helps and this time clean holes would last longer.

-
Turns out winter is indeed not over even though spring started a couple days ago here in Michigan.
Used my new razor knife to open a bag of salt.

-
Used the awl on my cheap and cheerful multitool to clear out the soap residue from underneath the pop up sink plug.
Danielle
-
I was deconstructing a terrace today and used the Centerdrive to help get to screws that were sunk in the wood, ones that were broken and removing nails along other things.

-
Used the package opener on my Spirit to open up a package. Scissors on my Super Tinker were used to cut some band aids apart.
-
Haven’t been around much lately due to starting a new job about a year ago. My multitool has never been so used however, only today it was used for unlocking/locking doors to check the figment of locks before the cylinders were fitted, cutting some cable, pulling cable through holes in walls. Been carrying the rebar as I like its light weight and compactness I also have a couple of them so don’t mind abusing this fella. Great to read about the 18th anniversary!
-
I’ve been installing several of these kitchen cabinet pull out shelves. Note how this one is shifted all the way to the left? It’s supposed to have about 1” from the cabinet wall. These things waste space, so I’ve now reinstalled all of them to maximize additional space for the whatever will fit. Redid 4 of them today

[attach id=0 msg=2486853]
Used my modded Wave to cut open the 1,000 zip ties holding the pieces together, pliers to gently bend a couple of the rack clips for better retention, Phillips and awl to help the drill on the screws (sometimes my Explorer in the more confined spaces), and Explorer small blade to open the boxes.
[attach id=1 msg=2486853]
And to finish off the day built a new small bathroom vanity cabinet with the Explorer Phillips.


-
Great multi team effort!

-
Indeed it was! We put together a second o bathroom cabinet as a family team. Our kids both used our Explorer Phillips to help while my wife and I used swisschamp and Spirit.
My father in law saw the first vanity cabinet and wanted us to order one for his mother’s nursing home room. Turns out we get 4-8am Amazon here so we ordered one last night before midnight and it showed up just a couple hours later (that is absolutely ridiculous). There is a massive distribution center nearby.
-
Was a day of tracing cables and identifying cables for access control. Used my leatherman micra a lot to snip the labels as my label printer if fubar, and does snip them anymore for some reason (really need to disassemble and repair but haven’t had the time) then went to a service call on the way home and forgot my small screwdriver to remove the tiny screw from a videx handset. Again, the leatherman micra tiny flat head managed to disassemble and assemble the hand set. Weird thing I only dropped the micra in my pocket by chance as I was in my edc drawer. Also used the tiny olight that’s clipped to the micra a lot whilst working above sealings. It was a great size to hold in my mouth.
-
I've been busy renovating the bathroom & sauna and also fixing up the in-laws' house for sale these couple of months. I rented a trailer to haul cement etc, and went to return it today. Noticed that the wiring inside the 7-pin plug was loose, the lights were breaking. Figured that they would charge me even though it must have been busted before I got the trailer. So I opened the plug and found that all the wires were disconnected. I googled the wiring schematics and fixed the plug with the cheap Stanley MT that I have in the trunk.
Later today, replaced some mosquito netting in a couple of windows with my Skele and staple gun.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login