30 day OPINEL CHALLENGE March 2024
-
Day 26
Cut a muffin in half, to share because a whole one is too much sweetness.

-
Opinel '24 Day 26
Another Opi and another cigar.
-
Day 27

-
Day 27:
Checking the content of RAO Avio survival pouch:

Sent from my iPhone using Tapatalk
-
wow- fancy Opi! -
that thing looks amazing. -
Day 27
I visited “Bond in motion” exhibition in Prague. Walnut 8 in my pocket:

-
Day 27 Rations duty today!

-
Opinel '24 Day 27
No8 in wine cask oak with this morning's coffee.

-
DAY 27
As stated yesterday, I found out that my oldest No8 was from the 1960's, so I thought I would do some comparison photos.
1960's No8 - hand stamped


1990's Inox No8 - please note that when closed the Inox No8 has a square grind to the butt end of the blade, so not an easy mod for the picnic fork and spoon


Now the No8 garden knife - the blade is thinner too.


Now the 1960s vs the 1990s - the blade stock is thicker in the stainless and my carbon steel 1990s No8's...not by much at all, but when you are really cutting hard with them in turn, it is noticable (this was before I saw the difference), I will get the caliper out....the only thing to note is that the carbon blades has a continuous draw / taper to the end point, while the stainless blade has a dramatic taper halfway down the blade

-
Day 27
Found an old piece of fake leather 9DIY trimmed it and made a little strap, then cut a wall tie for a shelf.


-
Thank you, and @Enginears too! I do like the looks, should carry it more really. Light, sharp, good size and solid, good value like all Opis.
If memory serves it is called ChaperonLähetetty minun SM-T515 laitteesta Tapatalkilla
-
😍😍😍@gra_farmer said:
DAY 27As stated yesterday, I found out that my oldest No8 was from the 1960's, so I thought I would do some comparison photos.
1960's No8 - hand stamped


1990's Inox No8 - please note that when closed the Inox No8 has a square grind to the butt end of the blade, so not an easy mod for the picnic fork and spoon


Now the No8 garden knife - the blade is thinner too.


Now the 1960s vs the 1990s - the blade stock is thicker in the stainless and my carbon steel 1990s No8's...not by much at all, but when you are really cutting hard with them in turn, it is noticable (this was before I saw the difference), I will get the caliper out....the only thing to note is that the carbon blades has a continuous draw / taper to the end point, while the stainless blade has a dramatic taper halfway down the blade

-
Day 27
Got out some other blades to have a whittle comparison over the lunch break. The Opinel is such an all business knife, serious slicing, serious working blade.
[attach id=0 msg=2471160]
-
Day 27

Sent from my SM-G996U using Tapatalk
-
Day 27
Final prep work completed on the the No9 project, taped the blade and lock rings. Awl completed by the No7 today.
[attach id=0 msg=2471188]
Wood sealer is next, then the selected stain, or just some polyurethane that I found.

-
@LoopCutter said:
Day 27Final prep work completed on the the No9 project, taped the blade and lock rings. Awl completed by the No7 today.
[attach id=0 msg=2471188]
Wood sealer is next, then the selected stain, or just some polyurethane that I found.
Looks quite shapely LC, I am looking forward to the final results.
-
Thank you.
Took my time, a little at a time.I also took the back of the blade at the tip DOWN removing the lift that a normal cli point tip exhibits.
-
28 Question
Nice Opi right...
Do you EDC it - obviously not a work knife?
What's your use for the Slim? [attach id=0 msg=2471200]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login