April Rebar and Friends Challenge
-
If we go w/ Big Bro/Little Bro it would be any "larger" and "smaller" LM from the same generation/family.
Off the top of my head:
- Minitool<PST(II) (Sideclip and Flair?)<ST
- Curl/Wave/Charge<Surge
- Pulse<ST200
- Kick/Fuse/Blast<Core
- Bond/Rebar<ST300
I guess the P4 is technically bigger than the P2, but not by as much as the others. Likewise, unsure where the Micra fits in. I guess with the Minitool.
I'm sure I missed a few, but I think that covers all the common models at least. Variants/special editions go with their "normal" model (Darkside, knifeless, etc.).If we don't have enough for a badge, I'll be mostly carrying the Rebar, and would be happy to just give people a chance to "make up" badges they missed that aren't run super often.
-

- BPRoberts
- Harley
-
Almost April so I gots me a new MT.

-
Excited for the unboxing, Harley!
Day 0
Got the family together for a nice Easter pic. The Rebar will be my main carry for the month, but I'm sure the ST300 and Bond will get some time as well. Rebar has been hard at work this week helping get settled at the new house, and done very well for itself.

-
Can't wait to tag along in this thread

I will try and post some pics here and there

-
@BPRoberts said:
Excited for the unboxing, Harley!Yeah so about that…
Much like BP it was a typical Harley family Easter Day. Food, adult beverages and family fun.
While recovering for to much food and just enough adult beverages I thought it would be a good time to unbox the MT and get ready for the challenge.
Seeing as it will just be a few of us I decided to carry the Super Tool 300 and grab the Core badge.
Opened up the box and showed it to my wife who was sitting next to me.
Wife was like “Don’t you already have like four of them?”
I reply “You see uninformed wife this may look like a Rebar but it is actually the slightly larger Super Tool 300”.
“You sure?”
“Of course I am, why would I buy another Rebar silly woman”


So anyway ordered the correct tool from the jungle website and it should be here tomorrow.
Wonder if she really believes I only have four Rebars?
Anyhow excited for this month’s festivities.
-
My wife and I have a bit:
Me- Good news!
Her- What?
Me- I lost a knife on ebay!The only LM I have doubles of right now is the ST300, because (I think) the shady seller I bought from sent me two by mistake.
Debating picking up a knifeless this month. Normally, I don't love knifeless tools that still have saws (no where that won't let you have a knife is going to let you have a saw!) but I often carry a folder with the Rebar, so that'd add scissors. Besides the ones on my keychain. But you can always use more scissors...
-
I'm not participating in this challenge, but I'll be watching
You also motivated me to start a small project that I have been putting off for a long time... I picked up 2 new Rebars at the Exchange for $50 each, and I want to do some Silver and Black tool swaps.This is the before pic:

-
This is great timing for me -- I've recently started carrying my Rebar more because I realized I actually like having pliers. :D
- BPRoberts
- Harley
- Tylermumford
-
Happy to have some more faces along!
Day 1
I pulled this molding the other day, but I just left it to the side when I stopped to go work on something else. Decided trying to step around it was asking for a tetanus booster, so I cut it down with the saw on the Rebar for storage and disposal. Worked pretty well.
[attach id=3 msg=2471882]Compared to the Vic 91mm saw, I think it takes a little more to get going, but takes bigger bites once its in.
[attach id=0 msg=2471882]Also, since they were there, I decided to give the wirecutters the ol' Tim challenge. I believe this is thinner than the nails he used in the demo, it took a bit of doing, and the blades starting to acquire some character, but they got the job done.
[attach id=2 msg=2471882]



-
Can I join today? I know it's a little late, but the Rebar is, pretty much, always in my pocket anyway.
-
Day 01
Due to other challenges it has been a while since I've carried an EDC fixed blade and it has been years since I've carried my Rebar, because I've never liked it. So, today I'm carrying this combo with the multitool sheath sewn on to the fixed blade sheath and here's hoping me and the Rebar can come to some kind of understanding over the next 30 days.
-
Day 1

The Rebar challenge is here!!!!!!! (and I need to change my desk blotter)
Craig

-
@cody6268 said:
Can I join today? I know it's a little late, but the Rebar is, pretty much, always in my pocket anyway.Of course!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Just in case,
A Day 1 picture (previously shared) of my 3 amigos[attach id=0 msg=2471894]

-
@BPRoberts said:
Of course!- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Thanks!
- BPRoberts
- Harley
- Tylermumford
- cody6268
-
Day 1;
Been wanting to try a folding saw that could take reciprocating saw blades (though I really wanted a smaller one that could take jigsaw blades--however, I'll get that once my weirdly loose Surge is back from warranty--and I specifically requested to have the blade exchanger replaced with the newer one that holds thinner blades tight).
Found this Stanley at Tractor Supply, and used the Phillips to adjust the holding screw to test a few different blades.
I will have to either modify these Bosch blades, or try some other brand. They don't seem to want to fit in the receptacle probably.

Opened a package.
Been getting more and more focused on Western and first responder figures (which are nowhere near as easy to find as superheroes, GI Joe, and Power Rangers). Not counting the Marx "toy soldiers" based on Dale Evans' Annie Oakley, only two have been made--by Excel Products in the '70s (pricey--over $100 new in box), and Accoutrements. The Accoutrements ones aren't worth much, and still go for under $20 new on card. Because I really didn't want to open up a twenty-year old figure, I bought a cheap $5 one secondhand. She doesn't appear to have any play wear, so I am sure the loose joints are factory. But, she does have double-jointed elbows (something usually not seen in Accoutrements/Archie McPhee figures--which were usually sold as novelty items and souvenirs) The Winchester Repeating Rifle is missing, but I've got a Colt Single Action Army that should work well. Been going over historical photos of Annie Oakley to see what's correct.
Been hoping Dime Novel Legends would eventually tackle Annie Oakley, Belle Starr, and Calamity Jane (all three done by Excel in the '70s); but it's unlikely. Seems that A: they have little interest in doing historical Western figures; and what figures they have done of real people have little to do with Western history--other than a few that have appeared in newer Western-set films. Besides, the owner seems very averse to doing any female figures.

Also used the pliers at Food City in order to fix a mangled shopping cart.
-
Day 1
Nailed the perfectly correct tool on my first try.

Still a beefy boi but has that new tool shine and is VERY stiff. No matter it will break in.

Planned to use the included molle sheath till my little surprise arrives but the molle sheath is a hot mess. Way too big and doesn’t attach to a regular belt well at all.
So much like everything so far with this challenge it’s on to plan B.
Skinth of course. Luckily I have umm well all of them for the most part.
Here it is with the ST 300 and a bit adapter card ready for work in the morning.

-
Day 1
I work in my home office, so my multitools only see sporadic use, but they do see use! Today was mostly about cutting tasks. I need to touch up my Rebar's blade, but it's still one of my sharpest. I like how thin and slice-y it is. And the serrated blade proved useful today for cutting the thick plastic of a laundry detergent jug.
I also was very happy to have the excellent Phillips screwdriver for adjusting a folding door in its track.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
