April Rebar and Friends Challenge
-
@BPRoberts said:
Of course!- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Thanks!
- BPRoberts
- Harley
- Tylermumford
- cody6268
-
Day 1;
Been wanting to try a folding saw that could take reciprocating saw blades (though I really wanted a smaller one that could take jigsaw blades--however, I'll get that once my weirdly loose Surge is back from warranty--and I specifically requested to have the blade exchanger replaced with the newer one that holds thinner blades tight).
Found this Stanley at Tractor Supply, and used the Phillips to adjust the holding screw to test a few different blades.
I will have to either modify these Bosch blades, or try some other brand. They don't seem to want to fit in the receptacle probably.

Opened a package.
Been getting more and more focused on Western and first responder figures (which are nowhere near as easy to find as superheroes, GI Joe, and Power Rangers). Not counting the Marx "toy soldiers" based on Dale Evans' Annie Oakley, only two have been made--by Excel Products in the '70s (pricey--over $100 new in box), and Accoutrements. The Accoutrements ones aren't worth much, and still go for under $20 new on card. Because I really didn't want to open up a twenty-year old figure, I bought a cheap $5 one secondhand. She doesn't appear to have any play wear, so I am sure the loose joints are factory. But, she does have double-jointed elbows (something usually not seen in Accoutrements/Archie McPhee figures--which were usually sold as novelty items and souvenirs) The Winchester Repeating Rifle is missing, but I've got a Colt Single Action Army that should work well. Been going over historical photos of Annie Oakley to see what's correct.
Been hoping Dime Novel Legends would eventually tackle Annie Oakley, Belle Starr, and Calamity Jane (all three done by Excel in the '70s); but it's unlikely. Seems that A: they have little interest in doing historical Western figures; and what figures they have done of real people have little to do with Western history--other than a few that have appeared in newer Western-set films. Besides, the owner seems very averse to doing any female figures.

Also used the pliers at Food City in order to fix a mangled shopping cart.
-
Day 1
Nailed the perfectly correct tool on my first try.

Still a beefy boi but has that new tool shine and is VERY stiff. No matter it will break in.

Planned to use the included molle sheath till my little surprise arrives but the molle sheath is a hot mess. Way too big and doesn’t attach to a regular belt well at all.
So much like everything so far with this challenge it’s on to plan B.
Skinth of course. Luckily I have umm well all of them for the most part.
Here it is with the ST 300 and a bit adapter card ready for work in the morning.

-
Day 1
I work in my home office, so my multitools only see sporadic use, but they do see use! Today was mostly about cutting tasks. I need to touch up my Rebar's blade, but it's still one of my sharpest. I like how thin and slice-y it is. And the serrated blade proved useful today for cutting the thick plastic of a laundry detergent jug.
I also was very happy to have the excellent Phillips screwdriver for adjusting a folding door in its track.


-

I love the Rebar's serrated sheepsfoot ♥
-
Day 2
Chopped my lettuce at lunch today with the Rebar.
Craig

-
I swapped the plier heads while I was in meetings (my camera was off). Every time I do a mod with Leatherman plier heads, I swear it will be my last... putting those things on is a "B word".


-
@tylermumford said:
Thanks for sharing the photo; the result is cool!
Thanks
They will look better after I swap the rest of the tools. -
Day 02
Serrated blade used to cut a cigar.
-
Day 2
I'll spare you all endless days of opening up boxes as part of the move. Today, I carried this Opinel No 6 with the Rebar. I like a basic folder when I carry a PBMT, and the 6 is one of my faves. I cheated on the last couple days of the Opi challenge by pocketing the Rebar, so this is only fair. Considering hunting down a Knifeless Rebar since I usually have a knife in my pocket anyway.

-
Day 2
So spent the day bringing dirt from a job site to the landfill. Of course being Michigan the weather was bad. All day rain. Do more off road driving in my semi truck then when I was in the Army it feels like.

Fat Man got some work in today bending the hooks on bungee cords that are used to hold turnbuckles out of the way when not in use.

Seen here taking a break on the steps of the truck.

-
Nice to see all the Rebars and STs getting love. Such a good toolset.
Today, mine was used for light cutting and a bit of food scraping (with the backside of the can opener). Not much.

-
This challenge is doing great

-
Impressive!
-

Hey, would the Signal qualify? It has the same plier head as the Rebar.
-
Day 2, not much use.

-
Day 3:
NPD (new phone day).
Due to a lot of stuff I really don't want to discuss, I decided to go back to a rugged flip phone, and I chose the latest model of the phone my folks had for many years (DuraXE), the Kyocera DuraXA Equip, the unlocked version of a model sold typically with Verizon; as A: they DON'T break and B: made in Japan. Only problem was the price ($300 compared to $100 for the DuraXE and the Samsung Rugby 4 I had at the time), so I'm broke this month.
Used the Rebar's blade to go through packaging.
Test photo.
For about the first three years of my membership here, I used flip phones, and off and on in the years since. Had to retire mine due to most being 2G/3G only, or not supporting the right bands due to carrier switches (AT*T and MVNOs on their network, to t-Mobile today); and I kind of forgot how to take a good photo with a flip.

-
NPD (new phone day).
Due to a lot of stuff I really don't want to discuss, I decided to go back to a rugged flip phone, and I chose the latest model of the phone my folks had for many years (DuraXE), the Kyocera DuraXA Equip, the unlocked version of a model sold typically with Verizon; as A: they DON'T break and B: made in Japan. Only problem was the price ($300 compared to $100 for the DuraXE and the Samsung Rugby 4 I had at the time), so I'm broke this month.
Used the Rebar's blade to go through packaging.
Test photo.
For about the first three years of my membership here, I used flip phones, and off and on in the years since. Had to retire mine due to most being 2G/3G only, or not supporting the right bands due to carrier switches (AT*T and MVNOs on their network, to t-Mobile today); and I kind of forgot how to take a good photo with a flip.

You savage.
-
Day 3
Pepperoni and cheese rolled up in some bread for lunch. ST got tapped for cutting duty.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login