Upper Peninsula Knife Makers
-
Michigan's upper peninsula is a thoroughly charming place. It is far enough from those millions of flatlanders downstate (sorry Mike, Jim, Chris, anybody else!) that you can hike or bike for hours and not see another human being. Large tracts of wilderness in the Hiawatha National Forest remain completely unpaved, undeveloped, and unspoiled. The peacefulness and fresh air go a long ways towards recharging a person's batteries. But after about a day and a half of this, a guy needs to get to town and find a cold beer. :)
My family and I just spent a wonderful week and half in the U.P., and during one of my beer runs to civilization, I spent an afternoon visiting the knife factories in the Escanaba-Gladstone area.
It's actually somewhat surprising, but this corner of the northern wilderness is one of the biggest knife-making hotspots left in the whole country! Within just a few miles from each other are the famous Marbles Arms factory, Northwoods Knives just down the road, Bark River Knife & Tool, and Rapid River Knifeworks. Also somewhat surprising is that all of them seem to be thriving.

The first place I visited was Marble's. This old company has been around forever, and is the original source for the knife-making talent in this area. Marbles is world famous for their knives, safety axes, match cases, adjustable sights for firearms, and other outdoors equipment. One of my earliest memories of my father is of him getting dressed up in his red-plaid woolen hunting outfit, with a brass Marbles compass pinned to the breast pocket. They still sell those same compasses today.

No tours of the factory floor were available the day I was in town, but just up the road the Marbles Factory Outlet Store had a large display of Marbles products.

The clerk there told me that some of the traditional Marbles products have been moved overseas, but production of several key lines such as their knives and firearms sights remain in the U.S.
Next stop on my tour was Northwoods Knives. I must confess that I'd never heard of these folks prior to driving by and seeing their sign out front.

In addition to their own line of quality fixed blades and folders, Northwoods has subcontracted several runs of folding knives for Marbles. It seems sensible to me that two knife-making companies in such close proximity to each other should team up and work together, rather than work against one another.


Northwoods also had a fine display of their wares in the retail area up front.

Behind the counter and around the corner is the factory floor itself. Through the glass partition I could see a number of employees grinding and polishing and pinning and assembling and all the countless other steps that go into producing a new knife. Whew, it made me dizzy to stand so close to people who were working so hard while I was on vacation! :P

Bins of components, waiting to be assembled into Northwoods Knives.
About a mile further south I then stopped in to visit Bark River Knife & Tool.

The folks at Bark River were extremely busy, scurrying around to fill a large order of knives for the U.S. military. The gentleman up front that I spoke with apologized for the depleted condition of their showcase. He told me that right now every single knife that Bark River can produce is already sold, and that they are working on a considerable backlog. As a guy who works in manufacturing myself, I can tell you that a large backlog isn't necessarily a good thing, but it is one hell of a lot better than the alternative!


What knives that Bark River did have available for display were absolutely gorgeous.
Last stop on my tour of Upper Peninsula knife shops was the Knifeworks at Rapid River.

Owner Scott Honkonen and I hit it off immediately, and we spent some time discussing a few of Rapid River's newest products. The showroom here is magnificent, a true showcase. Beautiful displays of the cutler's arts surround the room, highlighted by various stuffed animals and birds, with an outdoors setting that makes a person almost forget they are in a working factory!


Scott, if you are reading this, I do apologize for the poor quality of my photos. They simply do not do your work justice!


If you can't tell already, I thoroughly enjoyed my visit to Rapid River Knifeworks.
And, for that matter, all of the knife manufacturers I met during my short stay in the area. Perhaps it's the beauty of this part of the country, but all of these folks were as decent and down-to-earth as could be. Good people all around, who make quality products, and stand behind them. It does me good knowing there are still places like this around. :)
Bob
-
Now that's my kinda shopping :o :o :o
Where's me credit card ;)
-
I love Bark river knives....I've been looking to buy the PSK model but
I need to start to save some money.... -
@J-sews said:
Michigan's upper peninsula is a thoroughly charming place....Perhaps it's the beauty of this part of the country, but all of these folks were as decent and down-to-earth as could be. Good people all around, who make quality products, and stand behind them. It does me good knowing there are still places like this around. :)Thanks for sharing your tour with MTO, J-sews.
I wasn't aware that U.P. Mich. was such a hot bed of cutlery manufacture.
Of course I'd been aware of Marble Arms since I was a kid, but the other makers were new to me.
.
-
I was especially pleased to learn about how busy all these companies are. It seems like every week we hear about this comany or that moving operations to China in order to remain competitive. Apparently there is plenty of demand for the high-quality products these guys produce that they aren't feeling the pressure to move offshore.
A good thing to hear. :)
-
Ever thought about talking to the powers that be about knife making? :P
Def
-
-
Labor? In the US? I think it's spelled "Manuel" labor!
Just like Multitool.org, every successful business is built on the hard work of someone who speaks Spanish! :P
Def
-
I do not know how it is in other parts of the country. However, in the Ohio, Pennsylvania, West Virginia Tri-state area most of the people do a lot of manual labor and do it well and we cant find jobs because immigrants are cheaper to hire.
Back on topic, that knife shop seems really cool. Someone there takes pride in their work.
-
We've run into the same thing down here in the Ohio,Kentucky,West Virginia tri-state. Some folks though have taken to establishing themselves as craftsmen and hitting the craft show,and living history events circuits.
-
I did some gas pipeline work from Grayson to just south of Paintsville. Really nice area.
-
That is why I thought it was a nice area.

-
J-sews,
Great post. I enjoyed reading about and seeing the pics of these knife makers. I really like the Bark River knives and wish they would continue doing most of them in A2.
Thanks again.
:) -
You are very much welcome plowboy!
I'm already cooking up a plan to visit this area again next summer. I'd love to go back when I can spend more time with these guys, maybe actually get to see some knives being produced start-to-finish. :)
The problem is, I'll have a wife and three daughters along with ridiculously short attention spans. Hmmmm, hang on a sec, I need to go google for "yarn and craft shops" in the Escanaba/Gladstone area...... ;)
-
I think you discovered The Married Man's Guide To Peace Of Mind....I wind up doing the same when there's something I want to see or do....a little yarn and crafts goes a long way.
-
Don't forget the heartfelt "Yes, Dear!"
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login