Flame On! - April Firestarting Challenge
-
Day 10

I don't use my Zippo on a regular basis, and some of them are mostly for collecting. But one thing I learn about modern Zippo production is that they don't have the wick extend all the way to the bottom of the lighter. Some are even just all bunched up at the top inside the fluid chamber. So I am doing a rearrangement on this one to try to optimize the fuel flow.
-
@Fireman said:
DAY 10 My sapphire Spartan with Firefly. The problem should be obvious: the tip broke off the Firefly, leaving it impossible to remove from the scale by normal means. Another SAK came to the rescue, but I don't normally carry two. I've thought about sculpting a drop of JB Weld to make a new end to grab. Good idea?

I too think sculpting the JB weld probably is a pretty viable solution, especially if they don't cure too quickly so you could work it into a shape that you want.
And if you have spare toothpicks, maybe slicing the tip off another one and superglue it onto the firefly may work too?
-
I had the same issue and epoxied a bit of plastic on it and filed to shape. Sculpting the JBW would be good too. Post pics of how it goes.
-
@comis said:
and is that a Pelican M6 from another picture you posted?If you are referencing the well worn silver pelican in some of my posts, that is a 2350, a single AA. I really enjoy the 2350, I have carried it for 5 years solid, and more recently alternating other flashlights. I also have 4 or 5 m6s, and like those too.
-
-
Day 10

Someone mentioned a leatherman saw throwing better sparks for them. So I figured I'd play with it today and see. It seems to work well enough but I don't think it gave any better sparks than my vic saw. By far my favorite is an opinel. Closed they're the safest option.
-
Tapatalk has been giving me trouble posting so this one is late.
Day 9 of 30:
Zippo day
-
Day 10 of 30:
You'd be surprised how often I use this lighter in my desk as a teacher.
-
Day 10
Another rainy day. [attach id=0 msg=2473266]

-
Day 10
Pocket fire.
[attach id=0 msg=2473269]

-
🔥DAY 10🔥

-
@comis said:
How do you like the Reylight? I discovered his light sometime last year, and all the tints are some of the best I have seen. Quite enjoy his practical spacing and setting of the lights.i've really been enjoying Reylights and getting quite hooked on them. Rey is a really nice guy and his lights are great quality with beautiful emitters, nice solid tail switches, sapphire lens and I'm a big fan of the programming.

OK will do!

@comis said:
As a fellow flashlight enthusiast, I'm always happy to see a beam shot as a comparison. And I absolutely adore the 519a leds, especially the 5700 dedomed. It has absolutely no tint shift even when when it is dim and a nice hint of rosiness in it to make it warm and good to look at. (sorry for the detour, can't resist this one)me too those 519a are absolutely brilliant! looks like there's some interest in the beam shots so I'll try to do some proper ones out on the back 40 tonight when it's really dark. Stay tuned!

-
<u>Day 10</u>
I pulled some fungus off a dead tree with the intent of using it as tinder. I had plenty of spark with my Firefly but it wasn't taking it. I thought it was either too windy or the fungus was still damp from yesterday's storms. I added some dryer lint but still no fire. I finally wrapped everything in a napkin, and then used some chunks of bark to block the spark from the wind. After several tries I finally got it to light. I felt like I had plenty of spark but the wind definitely didn't help any. I'm going to try again with the Firefly when there's no wind to see if that was the issue.

-
Day 11
Roxon Flash and Milwaukee fastback. I like the fastback, but it's as big as a multi-tool with a tenth of the utility. I'll dig out my Gerber EAB, at least that one is tiny.

-
Day 10 of 30
Here is one of my imco lighters, and the brass one is my son's lighter, but I don't know what brand it is.

[attach id=0 msg=2473303]

-
-
Day 11
Sun is finally out, so I checked the tinder box and pulled out my SAK. Its amazing how quickly this charred canvas will start smoldering. [attach id=0 msg=2473341]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


