What's your latest flashlight?
-
Yeah, it's a solitaire Led from a few years ago, I gave it to my grandparents until I replaced it with a Fenix LD02 first gen... the don't regret the swap : they kept losing the head of the solitaire trying to light it up....
-
This little piece of pocketable madness.
Astrolux EA04 with 4x HP50 emitters wearing the 26350 tube and cell. A (brief) turbo output of a claimed 12,000 lumens. Actual output lumens is quite a bit lower with the 26350 cell being unable provide enough amps for Turbo. But it's still enough to make me giggle every time I fire it up.
Makes flashlight normies say things like "WHAT THE HELL?" and such.
Using the long body tube and a high current 26650 or 21700 cell and the time limit for turbo mode is more like, how long can you hold on to it before it gets too hot. Not as bad as another light I have, but it makes a great little hand warmer.


-
I know there isn’t much love for Olight, but picked up the Baton 4 with case. Charge the light 5 times or charge my phone? No brainer.

-
@PTRSAK said:
This little piece of pocketable madness.
Astrolux EA04 with 4x HP50 emitters wearing the 26350 tube and cell. A (brief) turbo output of a claimed 12,000 lumens. Actual output lumens is quite a bit lower with the 26350 cell being unable provide enough amps for Turbo. But it's still enough to make me giggle every time I fire it up.
Makes flashlight normies say things like "WHAT THE HELL?" and such.
Using the long body tube and a high current 26650 or 21700 cell and the time limit for turbo mode is more like, how long can you hold on to it before it gets too hot. Not as bad as another light I have, but it makes a great little hand warmer.That's one impressive hand warmer there. 8)
-
Well, having lost yet another Olight Perun Mini (this time thanks to the guy who borrowed it off me and then left it in the customer's car), I saw Amazon had a deal on this:
[attach id=0 msg=2472667]
Sofirm SC33.
Supposedly outputs over 5,000lm, but is more like 3500, I think.
Still bright enough to make fellow torch fans somewhat jealous. Runs off a 21700, has USB-C charging, e-switch tail cap, crenellated bezel ring (removable), comes with all the expected accessories. Lovely grip texture, very good UI.135mm long and just over 32mm wide, it's thin and smooth enough to still fit my UF Pro knife pocket for use as a heavy calibre daily carry. The 21700 cell makes a lot of difference to the feel, though. If they made a twin-cell extension for it, it would be the size of a lightsaber!

-
@GearedForwards said:
Arkfeld is a cracking light
For what it's worth I've never had it come on whilst having it in my pocket for fitness walks, I'm pretty sure the switching ring would prevent most accidental activations. Refreshing to see someone willing to use lock out though!
We were referring to the Olight Arkfeld, which is an excellent light. I have been carrying 2 versions of it for about 2 years - mostly recently the Pro version that has white light, UV and a laser.
I was concerned about accidental pocket activation. Well, it has happened a few times, resulting my the plastic lens melting. For the past few days, I have smelled something burning. Some times in the kitchen, other times in the basement. I walked around the house looking for any signs of an electrical fire. I finally figured out that the smell was emanating from the light.
I purchased it from Olightstore.com, which adds a lifetime warranty to all products and has superior customer service. They are sending me a new light, and a shipping label to return the old one.
The light really, really needs a glass lens, or some thermal protection to shut the light off. Or both. So, reluctantly, I'll be switching my EDC to something else. Candidates include the Nitecore EDC 27, Olight SR2 Baton II and Baton 3 Pro Max. I prefer an EDC with the capability of high output, plus a strobe.

Left to right: deceased Olight Arkfeld Pro, Nitecore EDC 27, Olight SR2 Baton II and Olight Baton 3 Pro Max (which I also own in white and coyote tan).
Melted plastic lens in the Arkfeld Pro. -
@powernoodle said:
We were referring to the Olight Arkfeld, which is an excellent light. I have been carrying 2 versions of it for about 2 years - mostly recently the Pro version that has white light, UV and a laser.I was concerned about accidental pocket activation. Well, it has happened a few times, resulting my the plastic lens melting. For the past few days, I have smelled something burning. Some times in the kitchen, other times in the basement. I walked around the house looking for any signs of an electrical fire. I finally figured out that the smell was emanating from the light.
I purchased it from Olightstore.com, which adds a lifetime warranty to all products and has superior customer service. They are sending me a new light, and a shipping label to return the old one.
The light really, really needs a glass lens, or some thermal protection to shut the light off. Or both. So, reluctantly, I'll be switching my EDC to something else. Candidates include the Nitecore EDC 27, Olight SR2 Baton II and Baton 3 Pro Max. I prefer an EDC with the capability of high output, plus a strobe.

Left to right: deceased Olight Arkfeld Pro, Nitecore EDC 27, Olight SR2 Baton II and Olight Baton 3 Pro Max (which I also own in white and coyote tan).
Melted plastic lens in the Arkfeld Pro.Yikes! Sorry that happened to you, did you figure out why it happened?
Glad to see they are sorting it out though.
-
Locking/unlocking with a long press is dumb, and sadly your misfortune proved it once again >:D
-
Just started test driving it this afternoon. I'm impressed that the magnet can hold this much weight. My one concern right now is that there doesn't seem to be a way to replace the battery once it quits taking a charge. This, however, did not occur to me until I had it in my grubby hands.


-
@AzteCypher said:
Just started test driving it this afternoon. I'm impressed that the magnet can hold this much weight. My one concern right now is that there doesn't seem to be a way to replace the battery once it quits taking a charge. This, however, did not occur to me until I had it in my grubby hands.

You just unscrew it, it takes a 10180 like basically all other keychain lights this size so you can easily swap it out if it conks out on you down the road.
-
Mine must be put together with Loctite as I can't get it apart and I don't want to mar the finish with pliers.
-
Well, they sent me a coupon, so I ordered a Nitecore MH12 Pro. Stay tuned.
-
Got myself two new additions :
M150 and e05II Ti, the objective was to have dual fuel capable flashlight as alternative to the 14500-only TS10[attach id=0 msg=2481024]

-
Just got a Sofirn SC21
I was drawn to it because of the Andruil UI, built in usb-c recharging port as well as CR123/16340

-
My latest in an Acebeam H16. What a lovely little light (and it is little) runs off one AA battery. The version I bought is 650 lumens, but a 1000 lumen version is also available.
I liked that it doubles as a head torch.
-
@greenbear said:
My latest in an Acebeam H16. What a lovely little light (and it is little) runs off one AA battery. The version I bought is 650 lumens, but a 1000 lumen version is also available.I liked that it doubles as a head torch.
Acebeam does make some nice lights. Their TK16 was my first Acebeam and it is one of the smallest 16340 lights I’ve owned. Their Rider Rx is also a fun light.
-
Nothing special compared to most of the lights here, but I got another “free” olight i3e today. Kind of a fun color scheme.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

