Explorer Challenge May 2024
-
Day 6
Slow day for the Explorer. Trimming a single cigar was the only use today.
Challenge totals:
Large Blade 9
Small Blade 7
Scissors 5
Hook 1
Inline Phillips 1 -
Day 6 (forgot pic)

-
Sportsman is shortening an air duct hose to allow a portable AC unit to fit closer to the wall. Still meeting the clearance requirements.
[attach id=0 msg=2476994]

-
Day 7 of 30
No usage today for my Explorer except playing with

Only Tools Matters
-
Day 07
I used the inline Phillips driver to tighten some drawer pulls.

-
Day 6:
Yesterday was slow in the office, but I spent some time with my dog after work.

-
Day 6
Today was very warm and sunny, but not close enough to summer to use the mag lens as a fire starter.
Tried the awl as ferro rod striker. Like my other 91mm SAKs it just doesn’t work well for me. Neither does the awl on my Wave. Wave saw started this fire. The Explorer blade crafted feather sticks at least.
[attach id=0 msg=2477096]
[attach id=1 msg=2477096]
Tools used:
Large blade x4
Can opener x1
Scissors x3
Small blade x2
Cap lifter x2
Toothpick x2
Tweezers x2
Philips x1
Mag lens x2
Awl x1

-
Day 7
It was a three-cigar day, so the small blade did the honors.
After lunch, the toothpick performed its designed function.
Later, after patching a flat tire on my son’s bike, I aired it up to check for leaks before putting it back on the rim. Then, I had to let the air all the way out to so I could get it back on the rim. If only I had a tool handy to do this without resorting to going out to the vehicles for a tire gauge. But wait! It turns out the inline Phillips is the perfect tool for this job. The fit is uncanny, almost like it was made for it.
Challenge totals:
Large Blade 9
Small Blade 10
Scissors 5
Hook 1
Inline Phillips 2
Toothpick 1
-
@Jeffjeeptj said:
Sportsman is shortening an air duct hose to allow a portable AC unit to fit closer to the wall.You did better than I ever could. Those little buggers always unravel when I try that.
@hsherzfeld said:
spent some time with my dog after work.
Another great day, y'awl!
-
Explorer large blade is opening a package of foam.
[attach id=0 msg=2477144]

-
@nate j said:
Day 7It was a three-cigar day, so the small blade did the honors.
After lunch, the toothpick performed its designed function.
Later, after patching a flat tire on my son’s bike, I aired it up to check for leaks before putting it back on the rim. Then, I had to let the air all the way out to so I could get it back on the rim. If only I had a tool handy to do this without resorting to going out to the vehicles for a tire gauge. But wait! It turns out the inline Phillips is the perfect tool for this job. The fit is uncanny, almost like it was made for it.
Challenge totals:
Large Blade 9
Small Blade 10
Scissors 5
Hook 1
Inline Phillips 2
Toothpick 1That’s really interesting I’ll have to try it. I wouldn’t put it past victorinox to have actually designed such intention.
@Jeffjeeptj said:
Sportsman is shortening an air duct hose to allow a portable AC unit to fit closer to the wall. Still meeting the clearance requirements.[attach id=0 msg=2476994]
I think every time I’ve installed window units, trimmed a floor AC exhaust/fit the window piece, and changed dryer vents, I’ve used a multitool. These are the jobs made quick by a good multitool.
-
Day 8 of 30
Used bottle opener to open lid of mayoanase jar. Little prying and hears pop and you can easily open lid afterwards.

Only Tools Matters
-
Day 07:
More screwdriver use.

-
Day 6:
It was time to hang the new spice rack, thanks to the Phillips driver.
[attach id=0 msg=2477196]

-
Day 7: I’m slowly catching up here. This afternoon allowed me to tighten a couple of doorknobs, but that was about it.
[attach id=0 msg=2477237]

-
Day 08
No use today, but I did go out to eat and I got a very appropriate fortune in my cookie.

-
Day 7
A bit of food prep today. First hook use to retrieve the tin can lid. Also opened some packages with the small blade.
[attach id=0 msg=2477249]
[attach id=1 msg=2477249]
Tools used:
Large blade x5
Can opener x2
Scissors x3
Small blade x3
Cap lifter x2
Toothpick x2
Tweezers x2
Philips x1
Mag lens x2
Awl x1
Hook x1

-
@Alan K. said:
I did go out to eat and I got a very appropriate fortune in my cookie.
@Grand_Banana said:
First hook use to retrieve the tin can lid.Good use of the hook! Celery is most definitely not my thing, though.
Another great day, y'awl!
-
Day 8
Used the large blade to open a couple fresh five-packs, and then the small blade to trim one cigar.
The scissors trimmed a jagged fingernail.
Challenge totals:
Large Blade 10
Small Blade 11
Scissors 6
Hook 1
Inline Phillips 2
Toothpick 1
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login