Scale swap
-
The blue cellidor of my day lie driver Cybertool looks a bit like there are lots of finger marks on it.. maybe I have to polish it a bit.. or it’s the light..
I will take a better picture of it when I got better light
-
If you decided to stand on the SAK to press on the scales, there is a big chance that you might bend a liner. That is definitely something you don't want. A vise, or clamps are a lot safer. Best wishes. G
:) -
Well I think it had survived it, I took a better picture of my daily (bit) driver

-
Looks good to me. Our friend MacGyver uses auto headlight polish to take care of tiny surface scratches. I used to have some Flitz, but used it all up. Since you carry your SAKs, it is inevitable that they will pick up tiny scratches. A few minutes now and then with some polish will keep them looking factory new. It seems that cellidor just picks up scratches and fingerprints and dirt so easily. Best wishes. Gary

-
My huntsman will get the same scales, but it should be much more easy to put them on as the knife is much thinner..
also it will get color fitting tweezers and thoothpick and these korkscrew tools where I still have to decide which one I will use..Might also be there where too cold back then , I had some issue..
-
You do know that if you take the scales off several times, that eventually they will be loose? First time generally works okay. After that they start getting a rattle when you touch them. Eventually you will have to glue them if you want them tight. I generally leave them where they are, unless they are broken. Just scratches means I polish.
It seems like you tired of your Swiza pretty quickly. Imagine what the white scales would look like after carrying them a while. I think I would still buy one if I found a used one somewhere. Best wishes. Gary

-
I did order a new pair of the same color, I don’t want to use them from the Cybertool.. and the used blue ones are only there until I get the new scales next week..
Whit the Swizza, yes maybe I would have to get use to its flaws, but it’s also a good collection item..
-
I have one or two white scaled SAKs and just pulling them in and out of jeans causes them to turn a bit blue. I ended up just cleaning and polishing them and making them shelf queens for now. Though the white really does stand stand out.
-
Ok now I have a picture of my fresh swapped Huntsman and the Cybertool

-
Looking good!!

-
It was about that divicult to get them on the huntsman like it was on the Cybertool ^^
I dont know if these Scales where Original Victorinox, i did not looked on the backside ..Where non transparent Plus Scales even something you get at Victorinox?
They look nice, the only thing i notice is that the Tweezers are a bit less stiff secured in its hole, its not that they fell out easy, : they dont fell out from gravitation, but they have a bit less friction like they had Originally..
-
Make sure the scale on the tweezer side is fully seated. If the scale isn't fully against the liner, the tweezer will be loose. Hold it up to the light sideways and see if there is any light coming through. I don't know how you are trying to seat the scales. I pad them with a piece of cardboard and use a C-clamp. That way I can put all the pressure on the spot just above the rivet. Best wishes. G
:) -
I did looked now: seems like there is still a gap, I press them on by putting the SAK in an Sock to secure it from scratches and then give some pressure by standing on the scale ^^
-
That is probably why your tweezer is loose. Standing on the SAK is not such a great idea. You could easily crack the scales or worse bend the liners. Borrow a vise or get a little C-clamp. Since C-clamp might not translate to German so well, I will send a photo. Best wishes. G
:) [attach id=0 msg=2478371]
-
I did watch an youtube video where someone said standing on it would be a good idea if you lack the hand force to push it together this way..
as i have my working shues on which ad also a bit of weight i did try this a few minutes ago, and now the tweezers on the Huntsman are fitting tight ^^
On Cybertool its also works now .. i had light shining on booth bevor ..Im also only 60 kg, so i its not that much force..
i know C-Clamps, but i only found quite big once at work, so i though it would be a better idea to try the standing on the knive methode again..
-
I've used slip joint pliers to attach new scales without much difficulty. A C-clamp is something I hadn't considered. Bench vises are probably the best tool for that job, as long as you don't tighten them too fast or too hard.
-
I use a vice with some rags between the jaws to slowly press them on. I just need to be careful that I don't Grape Ape them. For me, a vice is the easiest option. I wouldn't be able to press them on with my weight as I'm afraid my 205lbs (93kg) would be too much. :D
Glad you were able to get them on though.
-
The Knipex plier-wrenches with the plastic jaw guards are perfect for this
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login