Explorer Challenge May 2024
-
Day 19:
I’m already starting to miss the rain after today’s hot and sunny weather. I used the scissors to trim some plants in the garden.

-
Day 20:
I just read that Clarence “Bud” Anderson, WWII fighter pilot and triple flying ace (America’s last living triple ace, in fact) and squadron mate and good friend of Chuck Yeager, flew west on May 17 at age 102.
Here’s a shot of his autobiography in memorial.


-
We also lost Lou Conter recently. And it never sat well with me that the passing ofJohn Finn was merely a footnote, but Gary Coleman's passing the following day made headlines.
That truly was the greatest generation. Godspeed, BGEN Anderson.
-
Granddaughter used Explorer to open the battery compartment on the bubble blasters. She did not think the end driver would fit the small screws, but it worked fine. She also asked about the other tools. I am enjoying teaching the grandchildren about SAKs, batteries, etc.
[attach id=0 msg=2479330]

-
Day 21 of 30
While modding my MP600 i used flathead to remove dremel head to another.

Only Tools Matters
-
Day 21: A bit of down and dirty pencil sharpening today.
[attach id=0 msg=2479361]
[attach id=1 msg=2479361]

-
Day 20
Like Jeff, I needed my Explorer Philips to fix a toy. Best reason to carry a SAK with Phillips. I too was surprised it fit the first time I tried it. The
[attach id=0 msg=2479372]
Also, the June bugs are out. I got this one late last night taking the trash out. 3 more whacked me in the head around the porch light.
[attach id=1 msg=2479372]


-
Day 21
Small blade opened a small package today.
-
Day 19
Large blade whittled my fingernails.
Challenge totals:
Large Blade 18
Small Blade 28
Scissors 14
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1
-
Day 20
First magnifier use! It helped me get a closer look at some photos.
Scissors trimmed my mustache.
Challenge totals:
Large Blade 18
Small Blade 28
Scissors 15
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1
Magnifier 1
-
This is for Day 22, posted a bit early. I’ll be tied up with medical stuff.
Can you find the Explorer?

-
Lots of great pics everyone.

-
Day 22 of 30
Today more dremel head changes cause i made another saw to my MP600.

Only Tools Matters
-
Day 21
Just a typical work from home day today. Only used the Explorer except for the main blade and toothpick. Here’s a giant strawberry as part of the fruit I cut up for the kids snacks.
[attach id=0 msg=2479502]
Tools used:
Large blade x12
Can opener x6
Scissors x8
Small blade x7
Cap lifter x7
Toothpick x6
Tweezers x4
Philips x6
Mag lens x4
Awl x3
Hook x3
-
Day 22
Large blade cut up fruit for a snack.
-
Day 21
Small blade trimmed a cigar.
Corkscrew performed its designed function.
Challenge totals:
Large Blade 18
Small Blade 29
Scissors 15
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1
Magnifier 1
Corkscrew 1
-
Day 22: Sadly, no uses today.
[attach id=0 msg=2479544]

-
@nate j said:
Corkscrew performed its designed function.I'm 0 for 1 with that. The one time I tried, I bent the corkscrew. Hope your luck (or is that skill?) was better than mine.
Another great day, y'awl!
-
This salt shaker clumped up due to humidity. Added some rice using the tweezers (the shaker is a one time use sealed unit). We’ll let it sit for a few days to see if the salt flows freely.
[attach id=0 msg=2479585]

-
@Farmer X said:
I'm 0 for 1 with that. The one time I tried, I bent the corkscrew. Hope your luck (or is that skill?) was better than mine.I do this with some regularity, and have generally not had any issues.
My technique is to hold the bottle with my left (non-dominant) hand (ideally, with the bottle sitting flat on a table or countertop), screw the corkscrew all the way in as close to the center of the cork as possible, and use my right (dominant) hand to grip the SAK and pull the cork straight out. Pulling straight is key, as pulling at an angle is what ends up bending the corkscrew.
Another member here (I would give credit, but I can’t recall who it was) suggested that a better approach is to continue twisting the corkscrew in until the cork starts rotating in the bottle, and that once this happens the cork is easier to pull out. I have tried this, and my experience is that while this technique does require less force to remove the cork, I end up picking bits of the cork out from between the SAK liners, so not necessarily more efficient overall IMO.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login