Explorer Challenge May 2024
-
Still catching up.
Day 25:
A vintage Executive arrived in the mail, so I used the Explorer's Phillips and large flathead drivers to tighten up the Lansky clamp to sharpen the new guy.

-
Day 26:
Today was spent gardening. I replaced the spring plants with plants that will (hopefully) survive our Texas summer heat.
[attach id=1 msg=2480032]
With the help of the magnifying glass, I discovered some unwelcome guests: aphids! :ahhh
[attach id=0 msg=2480032]
I used the awl to make some quick drain holes in a planter.

-
@Farmer X said:
Sounds interesting! What sort of engines were on show?It was bigger than I thought it would be. A lot of of 20s John Deer type E engines. Variety of 1.5HP to the later 6HP. Some pretty neat early 1900s IH and some Briggs. Spent more time with the tractors, which were mostly Farmall. It’s funny out here the John Deere 1.5E (I think) was popular for water pumps while the Farmall H and M were popular for the tobacco fields. Farmall A was also popular. Not as many John Deere as Farmall. Some case and Ford sprinkled about.
It was fun but the most fun is watching the kids get so excited.
-
Day 25
Just the cap lifter today to open a drink followed by a couple beers later.
[attach id=0 msg=2480036]
Tools used:
Large blade x13
Can opener x6
Scissors x10
Small blade x7
Cap lifter x8
Toothpick x6
Tweezers x4
Philips x9
Mag lens x5
Awl x4
Hook x3
-
Day 25
Scissors trimmed my mustache, and cut out some temporary tattoos for the kids.
Challenge totals:
Large Blade 21
Small Blade 31
Scissors 17
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1
Magnifier 1
Corkscrew 1
-
We wanted a small piece of meat. Explorer opened the package. Did wash the meat juice off the blade.
[attach id=0 msg=2480082]

-
How’s the challenge going? I’ve been out of the loop on a trip out of the country this pas week but I’m back home!
From this challenge, I’m curious if anyone sees any screw stripping from the inline Phillips. The driver is well made, of course, but it seems to be a sort of “in between” size head, between a #1 and a #2 kind of? I could see that potentially tearing up some cheaper screws…
-
Day 25
I visited a model train museum. Tried to get a shot with a moving train but they were too fast.
-
Day 26
Packing for the return trip.
-
More great uses and photos, y'awl. And the engine show sounds like a great time!

-
Day 27 of 30
Today some more food prepping, also used scissors to shorten my finger nails.

Only Tools Matters
-
@marlowe221 said:
How’s the challenge going? I’ve been out of the loop on a trip out of the country this pas week but I’m back home!From this challenge, I’m curious if anyone sees any screw stripping from the inline Phillips. The driver is well made, of course, but it seems to be a sort of “in between” size head, between a #1 and a #2 kind of? I could see that potentially tearing up some cheaper screws…
I’ve been using the Explorer inline Philips extensively for a while and I’ve rarely had it cam out or strip a screw head. It’s small enough to fit #1 and wide enough at the base for #2. It has only failed me on wood screws where I really need a drill. I think it’s the same size as the Spirit Philips. Both work great.
-
Day 26
Scissors on mustache duty again.
Large blade opened some popsicles for the kids.
I used both the inljne Phillips and the corkscrew in an attempt to remove some plastic balls that had become stuck inside another toddler toy.
The inline Phillips worked great for removing the six Phillips screws. However, once they were out, I realized that the whole toy was still held together by an intricate series of interlocking plastic tabs, which I wasn’t going to be able to disengage without breaking.

Moving to plan B, the plastic balls had holes in them that were about the right size for the corkscrew; I was able to screw the corkscrew into them, and then use the Explorer as a handle to pull them out. I was able to retrieve two out of three balls using this method. The third was simply wedged too tightly and too far in to reach with the corkscrew.
Challenge totals:
Large Blade 22
Small Blade 31
Scissors 18
Hook 1
Inline Phillips 4
Toothpick 1
Cap lifter 1
Magnifier 1
Corkscrew 2
-
Day 27
I used the magnifying glass examine this bug more closely before I flicked it off of my scarlet sage.

-
Day 26
Only a few days remaining :ahhh
Opened some beer bottles with the cep lifter today. Also used the can opener flat head.
Found this crazy looking moth on the steps.
[attach id=0 msg=2480171]
And closing on our new house tomorrow so just doing a bit of small tool inventory.
[attach id=1 msg=2480171]
Tools used:
Large blade x13
Can opener x7
Scissors x10
Small blade x7
Cap lifter x9
Toothpick x6
Tweezers x4
Philips x9
Mag lens x5
Awl x4
Hook x3

-
Congratulations on the house! Moving is a pain, though...and I'll be doing that at least once this year. :ahhh :ahhh :ahhh
-
The surface of my main workbench has developed some divots and gouges I wanted to fill. I opened a used tube of filler and found the nozzle clogged. Explorer awl was used to remove the clog. It worked well. Applied filler is now drying.
[attach id=0 msg=2480236]
[attach id=1 msg=2480236]


-
Day 28: I was away for most of the weekend, at my cabin in the mountains, where there is no Internet, so I have a few days of carry to catch up on.
After the success of my new raised garden bed at home, I decided to set one up at the cabin as well, with big boy tomato plants, chamomile, mint, basil, and sunflowers. The knife and Philips driver were both used to unbox and build the raised bed.
[attach id=0 msg=2480237]
Once I got home yesterday, I had to lay down fertilizer and grub killer on the lawn. The main blade was used to open up all of the bags.
[attach id=1 msg=2480237]
Sundown last night was very chill and relaxed. Just me and my nosy dachshund on the back porch.
[attach id=2 msg=2480237]
[attach id=3 msg=2480237]



-
Day 28 of 30
Today scissors was used to trim my beard and later it helped me to open can of beer

Only Tools Matters
-
Day 27
Trimmed a few bougainvillea branches with the scissors. When you cut the ends off they grow back and flower.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login