What's your latest SAK?
-
@Tuisto said:
Here's a new addition to the club. By far the oldest model I own. I can't actually physically open the can opener. I got it open once but then almost pulled my nail off attempting it again. I play bass so I have to keep my fingernails super short and it can be a hassle sometimes to open some stickier models. I'll put some mineral oil in it and try again in a bit. Or maybe throw it into the freezer for a few minutes. I think this is from the last year these were produced, since they started with a new model in '51. I really like the clip point blade on this thing and I really really like the awl and screwdriver/cap lifter. And it came with a pouch, but I'm not sure it's original.Cool looking knife. I wouldn't use that freezer trick. Not sure it won't hurt the scales. Go for mineral oil and lots of opening/closing the can opener. If you dip it in hot water (just the can opener metal part) it might expand a little and make it easier to open.
Thanks for sharing!

-
The can opener is just stiff but doesn't scrape. Same with the awl and screw driver/cap lifter. Weirdly, when I tried opening the main blade this morning it was scraping even worse... With my ~2010 Electrician, when the awl scraped I just used the file on my Swiss Champ to file down where it makes contact (roughly where the bolster on the '50 Soldier is) and then oiled it and it was fine but I'm reticent to take a file to the '50 Soldier... I've got the same issue with my red '65 Soldier, too, but on that one the blade and cap lifter scrape badly. I figured freezer since that contracts metal, instead of warm water which would expand metal and potentially cause it to scrape more but I guess I'll try the warm water and mineral oil first.
-
@Tuisto said:
The can opener is just stiff but doesn't scrape. Same with the awl and screw driver/cap lifter. Weirdly, when I tried opening the main blade this morning it was scraping even worse... With my ~2010 Electrician, when the awl scraped I just used the file on my Swiss Champ to file down where it makes contact (roughly where the bolster on the '50 Soldier is) and then oiled it and it was fine but I'm reticent to take a file to the '50 Soldier... I've got the same issue with my red '65 Soldier, too, but on that one the blade and cap lifter scrape badly. I figured freezer since that contracts metal, instead of warm water which would expand metal and potentially cause it to scrape more but I guess I'll try the warm water and mineral oil first.The metal would expand while hot. When it cools down, it might have pushed the liners a little so as to reduce the friction at room temperature. Like when you soak an Opinel, so the wood expands and you open/close it a bunch of times. When it goes back to "normal", the wood contracts and it's easier to operate.

-
@z1913 said:
There was a post (but I can't find it now), where somebody put small piece of kitchen plastic foil on the pins because the pin holes in the scales were already worn/too wide from multiple reinstallation so the scales were too loose and the foil served as washer/plug so no glue was needed. I will post pictures once done.I attempted to reinstall the coach scales. There was very limited pressure needed to put them on - nothing close to what you need to install a brand new one - you could tell that they were already removed in the past.
But still they sit firmly on three ends of the knife, only the fourth one remained loose.
I tried to use the foil but to no avail - it remained loose so a drop of glue was needed.
Anyway, I am happy with the outcome. I used rambler, not classic, as the base - not historically correct but more practical!I like the leather - great tactile feel.


Sent from my iPhone using Tapatalk
-
Leather can be a great handle material. I'm curious as to how it works for SAK scales. That's one I'd carry, but with extra care. Nice job saving them!

-
-
I am super happy that I could get birth year SAKs for both my son and me this week. I could buy the '23 model in the store, but the '88 model was hard to find. I've been looking for a good and affordable one for a long time and now I scored a nice Wenger in pretty good condition for ~80 EUR incl shipping. It was quite gunked up but some dish soap, a good scrub and some oil revealed a very nice knife!
Here's the father & son BYSAK duo and some more detail shots of mine: :)
[attach id=0 msg=2481293][attach id=1 msg=2481293]
[attach id=2 msg=2481293]



-
Great job on the Coach scales z1913.

-
And a nice father-son birth year duo as well! 
-
Good point!
-
Thanks guys! Sure I'll keep it in my collection for a while before I give it to him. I guess that would be a nice present for his 30th birthday.
I just thought it's better to buy it now than in 30 years, it's not gonna get cheaper or easier to find in new condition ; ) Maybe this model will gain some more popularity until then. I am also not the biggest fan of the new iteration of the Soldier knife...
-
So I got a Wenger Traveler this week from the German equivalent of Craigslist. It's a strange version without a keyring, without scale tools but with the newer style nail file that is facing away from the blade. Tool-wise it was in pretty much new condition and all the tools have a good snap when closing. However, somebody apparently tried to remove a company logo from the backside scale. He definitely succeeded, but the scale looked rough and had a little dent in it.
[attach id=0 msg=2482314]I worked on it with 240, 400, 1.000 and 2.000 grit sandpaper and gave it a final polish. It turned out nicely for a user knife. If you look closely you can still see some of the pitting, but I didn't want to remove too much material.
[attach id=1 msg=2482314] [attach id=2 msg=2482314]I wanted a nice user Wenger Traveler for some time. I got a perfect one some time ago in NOS condition (key ring, scale tools, clear protective stickers still on the scales), but I couldn't bring myself to use it... Now I got a decent looking one for carrying.
[attach id=3 msg=2482314]



-
Looks good. I sure do like that red foil background that Wenger used to put on their crosses.

-
Victorinox Voyager - my first with electronics and 91 LED. I like the opaque ruby scales and the old school feel of digital clock and the old rounded version of the mini SD. When I purchased the knife I thought it is the Traveller model - with clock, altimeter and barometer.
The listing did not specified name of the model - just said SAK with clock (so no scam from the seller), but I thought he just omitted it from the description- I knew only about Altimeter and Traveller models, I did not know that there is as well Traveller’s predecessor with just clock called Voyager. Of course I do not need barometer and altimeter but would be cool to have it… But Voyager is nice enough too - it has great toolset for urban travels! Especially in the era before mobile phones it was great package - alarm clock, scissors, hook with file, in-line phlips, led light + usual blades and openers and plus scales (all scale tools are on the back side - with short version of tweezers).
Sent from my iPhone using Tapatalk
-
Some additional pictures
-



Sent from my iPhone using Tapatalk
-
My latest SAK is Climber, still waiting Ranger to arrive


Only Tools Matters
-
Great additions, Antti and z1913!

I especially like the Voyager as it has the file hook and that cool clock. I might be looking out for one as well. Especially when I'm outdoors or working on something I don't wear a wrissmurfch. And as phones have gotten so big, I usually have it somewhere in my backpack or my jacket. That's why I imagine the SAK clock could be pretty handy, because it's always in the pocket and quick to take a look at.
-
Some nice SAK additions!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
