Repaired Grappler
-
I disassembled it and straightened the broken Part

-
Finally i taped the Hole and bridged the "Chasm" with a short M4 SetScrew


-
It is perfectly usable again. Only requires a slightly different Technique to retract the Pliers. That big Hole which is now filled with the SetScrew was providing Clearance for the Pin of the ReleaseButton. So to depress the Button fully (to release the Pliers), the Handles have to be opened slightly. No Issue at all
I strongly recommend this cheap Hack for Anyone that has the same Gen1 Grappler. That Part will break sooner or later at the huge Hole for the Pin. Simply filling it with a SetScrew provides the needed Stability for Years to come
-
Perfect Combo

-
Congratulations on having such a unique locking pliers and, kudos on a job well done!

-
Brilliant repair! Did you weld in the set screw? It would need something to make the two parts one again.
-
It almost seems like the set screw just provides enough tension to keep the parts in line. He said he cut threads with a tap then just turned in a brass set screw. That would have been tricky. Evidently he got it to work. I don't think I would have thought to repair it that way. Best wishes. G

-
To compare the Changes ..
Here is Gen2 of the Grappler with the Part for the AdjustmentScrew vastly improved. They shortened the Screw and used the free Space to beef up the Part properly.
Pic taken from latest available Grappler Pagehttps://web.archive.org/web/20111020195924/http://www.gerbergear.com/Industrial/Tools/grappler_31-000333 Page
-
Now I know what to look for if I ever run across an old Grappler. Nice photos all around. Best wishes. G

-
This is the shoddy Part modeled in 3D, ready to be printed/sintered. Note that this mixes Gen1/2 and requires shortening the AdjustmentScrew quite a Bit (just like in Gen2). Forum does not allow arcane Attachments .. so rename *.stl.doc to *.stl. Sizes in mm. Make sure to look around for resonable Offers. Here in Germany i can get this in Titanium for 100$

-
I forgot about the Grappler! The used ones are mighty salty on the used market

-
Some minor but important Refinements to the 3D-File. Again, rename *.stl.doc to *.stl
-
Trilby, I think you are the Grappler expert. I didn't realize the prices of these things on the secondhand market until Barry mentioned it. Wowsers. Best wishes. G
:) -
Again some minor Refinements ..
Rename *stl.doc to *.stl -
Optional v24 with added 2.5mm Hole for a M3x3mm SetScrew to retain the PivotAxle (needs to get threaded) ( M3x4mm will also work)
You can preview these in 3D at https://www.thingiverse.com/thing:6652755
If You do not need this extra SetScrew, use v22 above
Rename *.stl.doc to *stl
📎 grappler24.stl.doc
-
V25 w. smoothed AxleBore from 32 to 320 Faces.
V26 likewise plus the extra 2.5mm Bore for optional RetentionScrew (Thread for M3. M3x3 or M3x4 will fit)
Preview in 3D on https://www.thingiverse.com/thing:6652755
Rename *.stl.doc to *.stl📎 grappler25.stl.doc
📎 grappler26.stl.doc
-
Freshly printed from Steel in CN. Replaces the broken Part just fine

-
Requires only very little FineTuning with a small File. And the small Clearance Hole at the Side could be larger. Use DieGrinder or 4mm HSS Drill to bevel it a Bit
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
