MTO Anniversary Challenge
-
Hello to day 4.
today it is 2 lovely ladies on show.

-
Thanks Gordon! I think you have the right idea with the Guard Frog though :D especially when it comes to feed time

@LoopCutter said:
Beautiful dogs, wow 3!
Very nice my friend.

-
Happy 4th to our American contingent! Some Powerlock action again!

-
Day 4: celebrating Independence Day with my American friends! Brought out one of the most (stereotypical) American things in my house for this occasion. ;)
[attach id=0 msg=2485577]

-
@Vidar said:
Continuing on my imagination the second one is my small 4 way screwdriver prototype in front of one of those gigantic 91mm Victorinox SAks.. All the drivers are in the center when open. They are also locking, and I'm pretty pleased with the mechanism for the locking system. These days the technology has advanced enough, so it is actually possible to make one that satisfied the official ISO hardness requirements for screwdriver tips.Care to share more pics of your prototype? Looks pretty cool.
<u>Day 3</u>
Our 80lbs lap dog Kuma taking a liking to my Opinel. He's a rescue that had Demodex when we rescued him. It took a while and a lot of meds but his brown fur came in real nice and pretty. He's real good with people especially kids. My wife wanted to find out what kind of breed he was so we had him tested with one of those Amazon DNA dog tests. Turns out he's 1/3 Great Pyrenees, 1/3 Australian Cattle Dog, and 1/3 Siberian. He's 100% sweetheart though that always watches over the wife and kids.

-
Day 4
My Multi-force

-
DAY 4
Happy 4th July....
.....my grab kits here...

-
<u>Day 4</u>
Thursday Surgeday.
Definitely got all my scissor needs covered today.
[attach id=0 msg=2485591]

-
Day 31

-
Day 4
Just a little red, white, and blue to start the day. Lots of nice posts on Dog Day yesterday. Considering that summer dog days are generally thought of as oppressive heat, humidity, and general stickiness. I got lots of cautionary advice from my poor old granny about dog days. I didn't listen very well however, and the only thing I remember is how one had to be careful during dog days. According to her, if you got injured during this time it would take forever to heal.
I am making friends with a new computer. It is my first with SSD. Sounds like something you would need to get shots for. I needed an SD slot, but I can always buy an adapter. Best wishes. G
:D
[attach id=0 msg=2485598]
-
DAY 4 Independence Day! PST and SAK with holiday appropriate colors.


-
@ReamerPunch said:
Day 4My Multi-force
Sweet! I tried and failed to find a Mossy Oak Multiforce.
-
Day 4
Wish I didn't have to work the holiday, but it is what it is. Carrying the Kizer Drop Bear, ASK Jefferson, and a spacepen.

Sent from my SM-G996U using Tapatalk
-
Day 4
[attach id=0 msg=2485620]
Sodiies of different complexions!


-
@Tasky said:
Today I happened to be toting a Wenger Handyman, so:
I'll show a couple of Wengers soon.@SurgeUk said:
Here's the Executive on a strangely empty Metropolitan line tube train
Interesting choice of upholstery. I could add that the little streetcar jobbies that shuttle folks around downtown Detroit are pretty neat.
@BPRoberts said:
It's a neat piece of gear.
@Luke Walker said:
Brought out one of the most (stereotypical) American things in my house for this occasion. ;)
@LoopCutter said:
Sodiies of different complexions!And a CopperLock, too!

Great stuff from awl, and happy Independence Day!
Day 4
Excuse me while I shamelessly steal ideas from IMR4198 and Fireman...

The keychain is appropriately dressed for the occasion.
[attach id=0 msg=2485626]
And here is the red, white, and blue SAK theme, but with 91mm models. The red one is a Hiker, the white reverse cross is a Tinker, and the blue one is a Camper.
[attach id=1 msg=2485626]
.jpg)
.jpg)
-
Day 4. I thought I'd switch it up a bit with a different kind of multitool. The first one is a picture from the Rhino3D program which I've used for 3D modelling since it was version 1.1 back in 1995 or so. Together with Solidworks, and once in a blue moon some programming, it is possible to make almost any 3D object. (I also had this project with some company some years ago that insisted on using SolidEdge for everything, and that was very comparable to Solidworks). I put a few different view modes on to show off those a bit too.
I stumbled upon the second picture yesterday searching for a file and thought it was a fun one. It is a screengrab from roughly 2016. It was a sketch of a logo for the multitools. The name was short and logo friendly but might not give the best associations? And over time other kind of tools got mixed in, and such a multitool focused logo didn't make sense anymore.


-
@LoopCutter said:
Day 4[attach id=0 msg=2485620]
Sodiies of different complexions!

Nice!

-
Day 4
A couple of No. 6s (Walnut and the standard carbon steel Beechwood model that I finished modding this morning):

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login