MTO Anniversary Challenge
-
<u>Day 6</u>
This is something I EDC every time I leave the house but I'm not sure if I've shared it. It's my Leatherman Tread bracelet. It is a bit gimmicky but, I have used it several times to assemble/disassemble equipment when I was in a pinch. I can even use 1/4" sockets with it and a open a cold one at the end of the day with it.

-
Hello to day 6.
Today is something blue. Not often seen outside the collection case !

-
Hello to Day 7.
I was a bit late with my day 6 pic (surprise surprise) and here is my day 7 offering. The lesser spotted juice XE6 dents and all.

-
Day 7: showing you a cool extension for the hex key set: the PB 470 M. That's an adapter for the 5mm hex key to take standard 1/4" bits. I take it with me together with the PB Swiss bit kit when I want to go light and not carry the PB Swiss Insider bit screwdriver. Saves about 20 grams and even carries 2 more bits.
[attach id=0 msg=2486115]

-
Day 7. Early in the day, but busy day, so here I go:
Some multitools have electrical tools. These are my fullsize alternatives for stripping and crimping.
-
Stripping pliers. I got quite a few different ones. Some flat out doesn't work or leave plastic hanging on, or they cut away some metal strands while they are at it. Or they only work with certain kind of materials and wires. These ones are the most universal working ones I got. Some variants that is regulated to a particular size also work well - but then you need to adjust the size.
-
Square crimping tool. This plier will crimp leaving a square shape with some rather distinct notches along the length.
-
Hex crimping tool. This plier crimps leaving a hexaogonal shape. The nothes are less aggresive than the plier above.
-
Close-up of the two after crimping. I had to cut the length as they were too long so the ends are deformed. Still, hex to the left, square to the right. Hex is better where the receptor expects a round shape, while square is better where the receptor locks on with a straight shape or edge. (If you have hundreds of cables connected on a machine that vibrates and shakes then minimizing the risk of anything coming loose becomes surprisingly important).




-
-
Day 7

I recently got a new Milwaukee utility knife, and now can understand why people like it. It may not be the lightest utility knife out there, but it certain is robust and very convenient to use. -
pocket spill: Red FX, titanium embassy pen, Weltool T8 Plus TAC flashlight, mini titanium keychain toolset.

i'm really loving the weltool T8 plus TAC flashlight it's got a heck of a wide throwy beam and it's basically as bright as car headlights on the high beam setting. here's beamshot from tonights misty evening air.

I always enjoy going out in misty weather, especially when I have a flashlight in hand. :D
-
@Pauldmmwc said:
Hello to day 6.
Today is something blue. Not often seen outside the collection case !
By discontinuing the Juice, I felt they left a hole in their lineup for MTs.
-
@ReamerPunch said:
Day 7Why go bladeless when you can go bladefull?
I am still waiting for a chance to get their buffet style MT, which one could choose what to install on the chassis. Kudos to GOAT for starting this whole trend, and I am hoping their new tool can take it next level up.
-
@LoopCutter said:
I almost forgot to share, have these two magnets on my range hood.[attach id=0 msg=2486012]
IIRC, designed and produced by Comis, then distributed by Nix.

I still owe many of you some magnets back in 2022(IIRC), and am just so busy nowadays with family life/Little guy, I probably just need to find time to complete that.

-
<u>Day 7</u>
Skeletool Sunday.
A nine hour night shift with about two hours work to do. Better than the opposite way round.
[attach id=0 msg=2486128]

-
DAY 7
Pocket dump, one of my best and most carried edc items is a close lab grade woven material mask....

-
Day 06
EDC when going outside. The bases are covered by this pouch.

-
DAY 7 Early morning and the dogs need to go out. Streamlight, Fenix, and headlamp/

-
Day 7
A big howdy do to all the camp followers for this challenge. Back in US Civil War days there were always a string of wagons etc. following the troops wherever they went. Curious, family members, sutlers, others less honorable. Contrabands. Reporters. Hookers. After the war, many of the sutlers liked to brag about their participation and pretended that they were part of the army supply organization. They did sell little odds and ends that soldiers might need, but mostly they sold tobacco and booze.
At any rate, I trust the members following along are enjoying the posts. Today it is a mini grinder. I bought the little thing at a flea market for $3. I saw some of the usual opportunists looking at a newcomer's table and picking through some of the choice items. No price on a little aluminum case with this tool. Nobody asked. I did. Not exactly a professional grade tool, but functional, nonetheless. Someone added about a dozen diamond bits to the factory assortment of brushes and abrasive items. Did a neat job of poking them through the rubber foam case liner.
Best wishes. G
[attach id=0 msg=2486139]
-
@comis said:
I am still waiting for a chance to get their buffet style MT, which one could choose what to install on the chassis. Kudos to GOAT for starting this whole trend, and I am hoping their new tool can take it next level up.I was very excited to see the Roxon Flex being announced. There are a few early reviews that are positive, so I will be getting it when it finally becomes available.

-
Powernoodle Day 7
*
I was a little heavy on the EDC this morning, but reduced it substantially for church.* -
Good one noodle. I never would have considered carrying cabbage leaves along with me. I might have to try it. Little packs of wet wipes are practically a must, I think. I have a nice fat possum spotted for the 10 Day challenge. Just in case. Best wishes. G

-
MTO Anniversary Challenge
Day 6 of 30Just a simple day around the house,,, trying to stay cool. Picked up some Sam's Club ribs,,,

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
