MTO Anniversary Challenge
-
<u>Day 11</u>
This one will forever be a shelf queen. This Winchester knife was given to me by my wife's late grandfather after my wife and I got engaged. He told me a gentleman should always carry a knife. The year before he passed, he gave me another one for Christmas forgetting that he had already given me one. I gave the second one to my son when he turned 10 and told him it was a gift from his Great Grandfather. We will forever cherish these and the good memories behind them.

-
Day 12
It's me again!

-
@IMR4198 said:
Well, gra. What is the cute folder from Day 11? Does it live in that padded case? Everyone else probably knows what it is by sight. Not me. If they don't have red plastic handles, or are made by CASE then I don't recognize most things.It's a Heinnie Slipstream link here - https://heinnie.com/heinnie-haynesr-slipstream
It's a titanium handled and S35vn blade, it's nice...Bought it, and found the steel a little soft for my liking, so trying to re-home it currently on BCUK.
-
@GA1dad said:
If you complete something during the challenge, please share.It's looking like I'll be doing just that, GA. My daughter just told us that she's going to move to Georgia with her boyfriend so he can try to get custody of his 2 girls. And all this time she'll have 2 of our grandkids.
They'll have no jobs, no place to stay and I have no idea what they're planning and I'm worried about my granddaughters.
I'll have to make something that they can keep up with that will remind them that we love them....
-
Day 12: my EDC flashlight for the past 3-4 years. It's already the second one, because I lost the first. Glad that I always keep a spare in the box! It rides in my left front pocket together with keys and a tissue, so it's getting some wear on the anodization.
[attach id=0 msg=2487080]

-
Other is regular ceilidor scale and other one is made out of birch plywood, orginally it was meant to be temporary scale until i get new one but after i coloured it with permanent marker and it wore out bit i decided to leave that scale on place and maybe someday do other half too.
Only Tools Matters
-
Day 4 Make-up
This screwdriver was bought at a yard sale in about 1978. It was pretty well abused when I got it. Since I have owned it, uses include drift, alignment tool, pry-bar, punch, and push tool. A true “multi-tool”. It is a Proto Professional currently about 16-1/2” long. The tip has been partially cleaned since it got melted and peened over.
The most memorable use was when I was repairing a bent and rusted frame for a 68 Triumph TR-250 car. The damaged/rusted metal was cut out and new material welded in place using the gas (oxy-acetylene) process. There were several locations where clamps would not work, so this tool was used by my wife to push/hold the new piece against the existing frame. Gaps between pieces are bad when welding. For some reason she would jump back if I got the tip of the flame in the puddle of molten metal and things spattered. She was 6 months pregnant with our daughter. That may explain why our daughter has picked up the car nut bug. Wife still shudders when she sees this screwdriver pulled out of the drawer.
-
Day 12 Post.
This is a single use tool. It allows access to check the gap between the rockers and valves on an older 911 “air-cooled” Porsche. Think 1998 and older. Two maintenance items were very important for reliability and “low” operational cost. Change the oil about every 3000 miles and keep the valves adjusted every 10,000 (6000 on the 78 and older). Do use dino oil since it transfers heat far better than synthetic. I decided oil was important since out of 8 factory gauges on the dashboard (not including the clock), 4 dealt with oil (oil level at idle, oil temp, oil pressure, and a low oil pressure warning light). Also, it took 11 or 12 quarts of oil, IIRC. Maybe the car is oil cooled, since it also has 3 factory oil coolers.
Valve adjustment required removing 4 valves covers, 2 on each side. IIRC, there were 44 nuts that held on the valve covers. The intakes were on top, the exhaust at the bottom. There was stuff in the way when manipulating the feeler gauge, wrench, and screwdriver for measuring and adjustments. This tool made the job possible and accurate. The 0.004” blade is replaceable since it is fairly easy to damage it while using the tool. It was convenient that adjustment was to be done on a “cold” engine. ie not started for 4 hours.[attach id=0 msg=2487093]
[attach id=1 msg=2487093]


-
Day 12
An old X-Acto tool. I dug out a few of the gouges. There are some more down in a box, but you get the idea. I had two of these handles originally so I could just reach for another without changing bits. I think a friend wanted to get into carving and I let him have it. Along with some other stuff I think.
Best wishes. G
:D
[attach id=0 msg=2487094]
-
We're just chillin' in the office, writing reports and updating spreadsheets, when a coworker rolls in with his big, scary multitool, scaring the interns...
And here I am with my office-friendly multitool, coming in the clutch with my scissors, stapler, staple remover, hole punch, ballpoint pen, flat and Phillips screwdriver, tape measure, and paper clips. I'm da real office hero

That looks pretty handy. Way to tame those TPS reports.

-
DAY 12 I almost bought one of these when they first came out. Instead, I waited until they got silly expensive/collectible.


-
Powernoodle Day 12

My 2023 Toyota Sienna hybrid with all wheel drive is my ultimate Man Purse. I was turned on to minivans a few years ago when my Chevy Suburban broke down several hours from home. We had 5 people and luggage to deal with, and everything fit easily in a Chrysler minivan that we rented. Minivans hit that magic spot of being biggish on the inside, and smallish on the outside. -
Noodle,
Nice looking. We like our 2014 with only 123k miles. Still reliable like our 2003 Sequoia.Gary,
Looking forward to info on the mini challenge you mentioned above.
I love those X-Acto tools. I’ll have to dig out one of my old boxes. -
Hi Jeff,
The mini-challenges are on a 5 day cycle. 5-10-15-20, etc. Leaders have been asked to state the parameters of each mini-challenge about two or three days before the actual date. Just to let the members playing along know what they need to scrape together for a post and get some photos taken.
If you want to, you can post a first two mini-challenge photo as one of your daily posts now. You can find out what the rules were in the old posts.
**Just in case. If the new Leader doesn't post a set of guidelines by the day before the challenge, we will have a back-up challenge. For backup purposes only..... post a watch and pen photo. MTO is all about back-up options, right? ** Best wishes. G
:D -
Who are the leaders?
-
Day4 : a slick gentleman folder
[attach id=0 msg=2487110]
And here it is in video (YT short):
https://youtube.com/shorts/T8qgbuI6Wfs
-
Leaders. I was the first. Then so more members could play the game, I handed off to powernoodle and stepped away from the whole thing. No more input from me. Noodle did his set of rules and handed off to whoever he chose completely independently. Same with the next in line. The next Leader gets to play their own hand, and then choose someone for the next stage.
It just so happens that I do know who the next couple of Leaders are. I believe I mentioned who the next in line was in an earlier post. Maybe we should let them be anonymous. If they want to say who they are, that is up to them.
There will be one additional mini-challenge during the month that doesn't follow the 5 day cycle.
Look for a post about it on or about June 18. Best wishes. G

-
@LoopCutter said:
Just a quick note, My mother past away on Tuesday very early and was assisting with arrangements yesterday and today. Visitation Sunday and services Monday, requiring more duties.my condolences.
you will be in my thoughts and prayers -
@LoopCutter said:
Just a quick note, My mother past away on Tuesday very early and was assisting with arrangements yesterday and today. Visitation Sunday and services Monday, requiring more duties.Sorry to hear that, LC.
Day 11
I know Vic mostly doesn't believe in marketing (I saw what I thought was a Vic ad in the wild the other day! But it was actually an REI one...), but I think more people should know about the Swisscard Nailcare. I've taken this thing on planes, cruise ships, and to every other kind of security, and it always gets through with minimal fuss. Fits in a wallet and gives you most of the tools on a Classic. For dropping the knife, you get a nicer file, a pen, magnifier, ruler, pin, and a 4-way driver like the old Craftsman keychain ones. You could awlso get one of the other card models and just leave the blade at home. If you forget and have to TSA the knife, it's still cheaper to replace and you get to keep most of your tools. Awlso a great unscary starter multitool. I know a few people who would never carry A KNIFE who somehow developed a small collection after carrying one of these for a bit.

-
<u>Day 12</u>
Dusted off the 40th Anniversary Garage 005 for Freeday Friday.
[attach id=0 msg=2487124]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login