What did you use your Leatherman for today?
-
Wingman went along instead of a pair of pliers on the Cub maintenance. Battery was charged up and bolted back in place. The wire retaining clip was difficult. Had to go get a big screwdriver to pry it back on. Not enough leverage on the LM for this.
Good news is the Cub cranked right up and I mowed the highest parts of the lawn. Spring.
Best wishes. G

[attach id=0 msg=2473904]
-
Thanks and great use, Gary
I think a lawn tool repair badge would be fun. Maybe also a dedicated thread if folks are doing consistent repairs. I have a battery Ryobi pusher mower and where whacked I primarily use, but I do have to break out the John Deere ride on for the back lot. It’s a pain to maintain but I’m not buying a new one while it’s still working. We had a John Deere push I eventually gave up on for the time being. Issues outweighed the cost of replacing. -
Today was one of those Wave does it all days. And one of those days where I just started cracking away without thinking about any action shots.
Spent a good deal of time today hunting more wasps. We’re finding all the holes around the stormers. So I used the Wave Phillips and pliers (for stripped screws) to pull off the frame and sprayed those suckers. Some of the seals needed some coaxing so used the pry bar to pop those off.
Then I found behind one of the more deteriorated siding strips the wonderful surprise of an old birds nest and an old massive wasp nest. Thank God there were no wasps. So after I ripped that out I cut with the saw a temporary cover out of plywood. Marked the length with the awl and nailed it in place. The windows and siding are all being redone this summer so it’s just being made livable until we move next month (it’s a family members home we’re staying in).
Next, I positioned ant baits along the outside of the house and snipped the openings with the wire cutters.
The kids and I also made a plastic bottle bird feeder using the awl to poke holes and saw to trim a dowel to length.
[attach id=0 msg=2475841]

-
Double-dipping with this picture but you gotta love MINI's!!! Good thing the screws on this plug were combo phillips/straight.
Craig

-
Used my wave to build a bbq for my neice.

-
This is my first time to use the Wingman package opener. Works fine. It wouldn't take much effort to open your thumb with this thing. It is really quite sharp. Best wishes. G
:D
[attach id=0 msg=2480736]
-
I wonder how many currently produced items run on C cells.
Glad to see that you're getting some good use out of the Wingman! 
-
Fired up the old John Deere mower that almost caught fire a few weeks ago. Got about 10 feet before the mower blades stopped and found one of the wires to the belt rotor was broken in two. It had clearly already broke and was repaired with electrical tape. Why not do the same again? My modded Wave has been sitting near the door so I grab it when I go outside and used it to cut and strip the wire and reconnect. The kiddo helped so it was good fun.
[attach id=0 msg=2487250]

-
I carry my black Wave Plus at work everyday.

Today the uses included :
- Pulling fuses in a rail truck trying to find where we went wrong in wiring the hi-rail gear - Pliers
- Opening some ice cold Pineapple Jarritos soda as it's delicious and it was 100 degrees - bottle opener
- Using the small ass Phillips screwdriver to open a book-light for out sales lady . She spent 20 bucks on a 3 dollar wish book-light on batteries. ::) ::)
- Using the Phillips bit to fix a trailer plug wiring .
- Used the pliers to pull the molding from a Dodge 5500 to get to the GPS tracking unit
- Used pliers to cut wire and put a butt splice on the end of it.
Think that's it for today.
-
@Grand_Banana said:
Found one of the wires to the belt rotor was broken in two. It had clearly already broke and was repaired with electrical tape. Why not do the same again?If that's what you need to finish a mowing job, I agree. Though a new wire should be installed eventually.
@Pacu said:
Opening some ice cold Pineapple Jarritos soda as it's delicious and it was 100 degrees...I could do without that kind of heat, but I do like Jarritos! Tamarind is a real favorite of mine. I should actively look for some.
-
Maybe a new mower is a more cost-effective option?

-
I used the scissors on surge to cut a circle around some thick heat shrink tube which I put onto a steel rod's edge. The small tip of scissor together with the robust/firmness of the scissors pivot makes it perfect to do the job. Better than a pair of pointy scissors with weak pivot or a big pair of scissors with blunt tips.
The rod is used as a tool for doing myofascial/trigger point release (roll that thing on muscle with pressure). The heat shrink tube was to cover the edge of the rod.

-
No photos unfortunately, I seldom remember to take them to be fair.
Used the Phillips to open up some power supply boxes before I grabbed my tool bag and used the needle nose to put some bends in copper conductors before I terminated them
-
I used my Leatherman and the ratchet to fix the shift actuator on the washing machine again. It was only tipping the machine back, two screws and a wire connector but knowing I didn't have to get back up for tools was nice. Thanks to whirpool for keeping me competent at home repairs every so many months. I bought two parts this time around so there is no wait next time
-
Excellent uses, all

-
This might be on the Eww list of things, but...
Spoiler:
I removed the ikky build-up underneath the earrings with the Garage 5th using the awl scraper.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
