MTO Anniversary Challenge
-
Day 29
I mentioned this in an earlier post, but I love slip joint knives for the nostalgia they evoke of knives I used in my childhood. You can say that I also appreciate the simplicity of these knives as an adult too. I wish I still had one of my old pocket knives, but I was a typical boy and broke or lost almost everything I owned.
Here's a slip joint from my collection that I don't think I have ever posted.
-
Day 29
My first SAK, a Pocket Pal, from when I was 10 or 11 years old. Brings back all kinds of childhood memories and one of the knives that started me down this path. I still remember picking it out in the case when I was visiting my grandmother and all the memories of that time in my life.

-
I have to play catch up today as I couldn't get to my computer this weekend.
<u>Day 27</u>
Not everybody likes/loves SAK-A-Likes but I've taken a liking to a lot of them. I know they are not the same quality as Victorinox but for a lot of us, this was our first exposure to multi-tools.

-
@Barry Rowland said:
The pocket powerhouse...
@BPRoberts said:
Executive helped out several times at a party.I came to appreciate the Executive way too late...
@m47mu74nt said:
30yo train...
@ReamerPunch said:
Something I have come to appreciate as an adult:
A good sponge.I never saw that one coming!
@IMR4198 said:
The little Bakelite box in the center is a Kodak Baby Brownie Special.Sweet old camera! I miss my Rollei 35T. Before eBay forced PayPal on everyone, I was so antsy to get that camera that I overnighted the money order. :D
@powernoodle said:
I have several Corgi cars from my childhood, which were and are one of my favorite toys. This one is probably a 1967 Oldsmobile Toronado.
Does it have the take-off wheels?Yet another great day, y'awl!

Day 29
I loved Legos as a kid, and still do today. Small tools, on the other hand, were something I came to appreciate much later (like after I left active duty). Here are a Leatherman Mini Tool and some Lego go-karts.
[attach id=0 msg=2490091]
Of course, I could do without the silly prices discontinued Lego sets and multis command on the secondary market. :ahhh :ahhh :ahhh

-
Playing catch up.
<u>Day 28</u>
For me, a watch is part of my EDC whenever I step foot outside of the house. Recently I picked up a watch I liked and some spare parts to change it up a bit.
[list type=decimal]
-
This was the donor watch for the green face and movement that's in watch #2.
-
This was my original watch that I really liked but the movement failed so I put the green face and movement into the case.
-
This is my original face and broken movement that was in watch #2.
-
Number 4&5 were picked up later and provided the movement to fix #3.
Now I need to find a new 42mm case to put it in.

-
-
Day 27
A study of some openers

-
Day 28
A swiss tool RS from the German disaster control agency. The main blade is marked with "Bund" (Feds).

-
<u>DAY 29</u> I haven't done well with the mini challenges, and I think I'm botching this one as well.
As a kid, I looked forward to the Rudolph the Red Nosed Reindeer special every year. I finally found Yukon, who will say a few of his pithy quotes. He's posing with a mint, uncarried Fisherman.
[attach id=0 msg=2490101]

-
day 29 post
Both my wife and I remember this knife from a long time ago. Long enough that we think it was a “hand me down” from one set of parents or the other. We used to use it in the kitchen until I broke it one day. I don’t remember when or how. Now it is used in the shop. She does clearly remember who broke it.
[attach id=0 msg=2490102]
Here are some more nostalgic Matchbox.
[attach id=1 msg=2490102]


-
Day 29

Swisschamp. Though I have long lost the original that was given to me many decades ago, I still remembered the feeling when I first gotten it as a gift. Till this day, I often keep one in my lugguage whenever I am traveling oversea.
-
-
<u>DAY 29</u>
Some interesting stuff and personal memories being posted today

I've opted for the following;
<u>My late father's pint glass:</u>
He bought it when he went to Spain with his mates (in the late 50's/early 60's) I still use it on his birthday and mine and at Christmas etc but I'm careful to hand wash it.
*It is clearly typical cheap tourist tat but I remember it from being a nipper so it means a lot to me.
*
<u>2) My Grandfather's bayonet from WW2</u> (he fought in WW1 & was in the Home Guard in WW2)I never met my father's father (he died before I was born) but he gave it to my dad and my dad gave it to me. It's dated 1917 and is made by Remington.
In the grand scheme of things it's not really rare, so not worth that much, but I'll never it let go (unless one of my Grandsons shows an interest)

-
-
@Rich_SD said:
Very cool
I was a Computer Operator on an old Burroughs Mainframe when I first joined the Air Force. 
Had Air Guard base in my city, we supported their equipment for the Space and Defence Group within Burroughs.
Eventually, I was tapped to support other bases around the MidWest through, Indiana, Michigan, Illinois and Ohio.
Do you remember the mainframe model?
Most of the sites I handle support were for modem communications and online processing of payroll when they cut checks on base.
A couple sites were burning the phone lines at 200 to 400 baud. Read a 80 column card with staff I’D, 3 minutes later print a check. At one base it took 3 days to print checks for staff😳
-
@LoopCutter said:
Had Air Guard base in my city, we supported their equipment for the Space and Defence Group within Burroughs.Eventually, I was tapped to support other bases around the MidWest through, Indiana, Michigan, Illinois and Ohio.
Do you remember the mainframe model?
Most of the sites I handle support were for modem communications and online processing of payroll when they cut checks on base.
A couple sites were burning the phone lines at 200 to 400 baud. Read a 80 column card with staff I’D, 3 minutes later print a check. At one base it took 3 days to print checks for staff😳
That was a long time ago, but I'm pretty sure it was a 3700. We were base-level "data automation", so we did everything from printing checks for finance, updating personnel records, printing orders, etc. And, yes, it used punch cards
I was one of the few that knew what "hanging chad" was before the year 2000 presidential recount.
On that, my professional expertise told me that you only have a lot of hanging chad if you are punching multiple cards at the same time. -
Thanks Rich SD.
That said, my professional expertise told me that you only have a lot of hanging chad if you are punching multiple cards at the same time.
[/quote]When I was going to college where we had a mainframe with remote terminals spread around the campus. Of course, the remote terminals created punch cards. Then we had to carry the cards to the “input center” where the mainframe was located so the cards could be processed and then the program run. A printout would come along at some time in the future. This was when handheld calculators were a new thing, in fact I got mine as a college graduation present.
I don’t remember ever having hanging chads until I lived in Florida in late 2000. -
@Jeffjeeptj said:
I don’t remember ever having hanging chads until I lived in Florida in late 2000.Yep, that was my same experience. There was definitely some ballot bullsmurftery going on in Florida that year.
-
Day 28

-
Day 29

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

