MTO Anniversary Challenge
-
Day 22: (day30 for everyone else)
Military thing: nearly all of them, the Glock entrenching tool being the only one that had been actually used by the military (this one is a Danish issued Austrian tool)
Thing never carried before : Streamlight Sidewinder compact II (actually it's a bit wrong I carried it and used it yesterday, and that was the very first "real use")
The thermal camera is more of a hunting tool than a military one, and I use it to try to spot wildlife at dusk (not an actual hunter)
[attach id=0 msg=2490319]
-
@Sos24 said:
Day 29
My first knife a Utica Girl Scout knife. Being my first knife part of the reason for nostalgia is obvious. Every time I look at the knife, I can’t help but think about Girl Scouts, especially camp and backpacking.Coffee, which I’m making in the picture is something that I have appreciated at different levels in my adulthood. It wasn’t until I was in the Navy that I drank coffee and that was for two purposes - help stay awake or help warm up. Those effects were appreciated during my Navy career. I could recognize the difference between a good and bad, but still didn’t often drink coffee for the enjoyment. Then I had an officer who really appreciated good coffee and would sometimes bring me a nice cup. That started me liking a appreciating it. Now that I don’t usually need the effects of coffe, I’ve come to really appreciate the experience or ritual of enjoying a nice cup of coffee, especially when maling outside.
Nice set up
-
-
Day 30: I've had this Workchamp for a while, however I've never carried this along..

-
Day 30 of 30
Today carried first time one of my Spartan i own, i havent never carried since i received except today (probably never gonna carry it again). Also in picture i have my military issued canteen this replaced my old canteen what broked month before service ended. it has some scars from my service time and i sometimes carry it when i head hiking
-
Thanks for the badge - whichever invisible moderator did it.

-
DAY 30.....final day....yay
Had to go out with a bang, the whole multi tool collection.....SAKs and leatherman.....with just a single stranger in the mix in the form of a Roxon Flash...
The rarest is the Leatherman Stache
The most praised SAC is a pruning knife given to me by a famous horticulturist David Ridgeway
And them all boxed up for bed.....sweet dreams my precious....
-
@gra_farmer said:
The rarest is the Leatherman Stache
-
Day 30:
Never used this before because it just came in the mail today! New Boxer Blades EDC Pup. Sweet little EDC fixed blade
[attach id=0 msg=2490343]
-
Day 30

-
MTO Anniversary Challenge
Day 30 of 30Great challenge! Enjoyed seeing all the variety!

-
Day 30
Military stuff and something I haven't carried...Pt1:
Mauser Bayonet
Plum 1917 bolo
AK bayonet
Czech bread bag
US Otis IWCS kit w/ MP600 (gun cleaning kit)Pt2: Carry something I haven't carried, that MP600 will be taking the place of my Rebar today.
I have other MPs and carried a 600 for years but this one has lived in the IWCS since I got it.
-
Congrats everyone on a great challenge. It's been fun following along


-
@Fireman said:
<u>DAY 29</u> I haven't done well with the mini challenges, and I think I'm botching this one as well.As a kid, I looked forward to the Rudolph the Red Nosed Reindeer special every year. I finally found Yukon, who will say a few of his pithy quotes. He's posing with a mint, uncarried Fisherman.
[attach id=0 msg=2490101]
Love it.@Noa Isumi said:
Day 30
Military stuff and something I haven't carried...Pt1:
Mauser Bayonet
Plum 1917 bolo
AK bayonet
Czech bread bag
US Otis IWCS kit w/ MP600 (gun cleaning kit)Pt2: Carry something I haven't carried, that MP600 will be taking the place of my Rebar today.
I have other MPs and carried a 600 for years but this one has lived in the IWCS since I got it.Great collection

I have a couple Arc pouches and really like them.
@MTSAK said:
Day 30:
Never used this before because it just came in the mail today! New Boxer Blades EDC Pup. Sweet little EDC fixed blade
[attach id=0 msg=2490343]Sweet kmife. I really like the holster design
@gra_farmer said:
DAY 30.....final day....yayHad to go out with a bang, the whole multi tool collection.....SAKs and leatherman.....with just a single stranger in the mix in the form of a Roxon Flash...
The rarest is the Leatherman Stache
The most praised SAC is a pruning knife given to me by a famous horticulturist David Ridgeway
And them all boxed up for bed.....sweet dreams my precious....
One heck of a collection
-
Day 30.
I had to modify the challenge a bit to make this fit. So this is a never used multi-tool used for the first time: I present the "Hobby-Fix" which comes from unknown origins and likely showed up around here in the 1950-1970 or so. It was silly dirty and dusty so some parts were still wet from cleaning at the time the photos got taken. And is it took surprisingly much space I had to just place it at the edge of a table - just ignore the more modern stuff behind it.
The Hobby-Fix consists of various parts in seemingly steel, cast aluminium, aluminium sheet and oak wood parts. According to the manual it can be used for for clamping and holding like a vice, used to hold or press low and or wide parts for planing or gluing, hold parts so they can rotate, it can be used as a manual bench press drill, wood lathe (?!) and pressing of juice from fruits or vegetables (!). Personally I also think it might work to hold pieces perpendicular for welding tacks. It also comes with extra jaws to hold round parts, and aluminium jaw protectors for holding metal parts. Anyway, some pictures of the Hobby Fix (ignore the modern stuff - and I had to clamp it onto some aluminium plates as the table was too thick):




-
@AzteCypher said:
The can key on the Phillips reminds of weekends as a kid when mom would make Spam.Though the can key probably isn't of much use anymore, Spam is one thing I came to appreciate as an adult. Chorizo is the same way (my Mom detested both).
@IMR4198 said:
A USMC KaBar and my Uncle Bill's New Testament that he was issued when he went in the corps.
@Barry Rowland said:
This will also be my last challenge for awhile.With awl you have on your plate, I can certainly understand that!
@Rich_SD said:
I guess it's an appropriate sized knife when you fight the war in an air conditioned computer room.
@zenostoic said:
I've had this Workchamp for a while, however I've never carried this along..Good choice!

@Vidar said:
I present the "Hobby-Fix" which comes from unknown origins and likely showed up around here in the 1950-1970 or so.Looks like it could come in handy!
More great stuff, y'awl!

Day 30
Military item: my Shellback card. It definitely has its unfair share of battle scars. I regret keeping it in my wallet for any length of time.
[attach id=0 msg=2490377]
Item I have but have never carried: a JPST. Unfortunately, some clod who didn't know what he was doing took a grinder to the blade.

[attach id=1 msg=2490377]
I did use it to open a can of Spaghetti-Os.
[attach id=2 msg=2490377]
It worked pretty damn well!
[attach id=3 msg=2490377]
.jpg)
.jpg)
.jpg)
.jpg)
-
@Farmer X said:
Unfortunately, some clod who didn't know what he was doing took a grinder to the blade.
I had once hired a welder to weld a series of parts. I came into the workshop and saw him standing with a grinder and having a good go at our precision cast iron flat table. Apart from being silly expensive these tables are dead flat and used as measurement instruments to check parts for flatness. Well, he had checked the parts that he had welded for flatness. And they didn't lay flat on the flat table. Clearly the table must be wrong, and his parts correct, so he had decided to take a grinder and make the table right using his best eye measure... After that the precision table could no longer be trusted for flatness - one could see light under even known flat/ straight parts.

-
I hope the replacement cost of the table came out of his pocket. He needs a good
himself! -
@Farmer X said:
I hope the replacement cost of the table came out of his pocket. He needs a good
himself!No, not how it works here unless you do it on purpose. It went on the smurf happens account. I've done far worse myself so fair enough.
And he was a great welder - best we ever had around. We had to get him a new old style welder though without "displays, digital settings or touch buttons". Two-three dials on a welder and he did amazing! Old school master for sure - great respect indeed for his welding skills! Too much initiative grinding things though! :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






