Did I hear the word Hammers?
-
I've got way too many hammers, and they're all over the place, but here are a couple more.
Over the years I've acquired numerous steel handled framing hammers, which are great. But in recent years I've come across a couple of wood handled ones, with magnetic nail holders. Why doesn't everyone do this? You can use one of these to start a nail one handed anywhere you can reach with the hammer. Anyway, here's one of those, brand unknown because the head is not stamped. I can't remember what, if anything, the handle said. There are several similar brands, I think generically known as "California" framing hammers. I have another but it's at a lake house. I lost it for a while in the weeds, so I painted it blue. Whenever I am painting something and have a little left over, I'm likely to daub it on a tool. It's amazing how easily some tools just disappear as if the earth swallowed them up. These hammers are very comfortable to use and swing, and I use this one a lot around the barn and environs to hammer nails to hang stuff on.
The other one is what I imagine was the smallest Irwin ever made. Hard to see in this picture, but it was chrome plated too. A classy little hammer, and though a bit limited in power, just right for picture framing and the like.
[attach id=0 msg=2490015]

-
-
-
@bruto said:
I should probably introduce myself a little, having just showed up a while ago looking up data on my Leatherman. Anyway, I'm 76 and I've been around tools for a long time, and I tend to collect stuff, and I thought a couple of hammers might be of interest here. I have lots of hammers. A significant but not complete collection of those that never got rehung hangs on one of my outbuildings.
[attach id=0 msg=2487414]I've got way too many hammers of all sorts, from the tiniest ball peens to the sort used to drive circus tent poles, but thought tonight I'd feature a couple of the strangest. First is a short-lived Estwing model, which apparently didn't sell well. Too bad because although it looks bizarre it is very tough and nice to use. It's modular in construction, and head portion is cushioned a little, so it's nice to hit hard. The second, found long ago at a sale, has a hand forged head and hand made handle. Some long ago blacksmith made this thing, and now I'm a bit reluctant to use it, but it's beautifully balanced, and if some ultimatum came down that said I could only take one hammer with me, this would likely be the one.
Is that Estwing a slate roofing hammer?
Cool thread btw -
That first Estwing is not a slate roofing hammer - poor angle, but it's a standard claw hammer with the checked face generally preferred for framing hammers (where you don't worry about the marks left). I have a couple of roofing hammers, but made for asphalt roofs.
I have a slate roof and have done some work on it, but usually use either a standard roofing hatchet, or a body working hammer with a pointed peen, which punches the nail holes nicely. Too late tonight but I'll try to round up some amusing roofing tools later.
-
This is the second of two somewhat unusual hammers I bought at a recent estate sale. This is a straight claw, electrician's hammer. The small face and long poll are designed to make it easier to drive nails in tight spaces. I'm still trying to determine the maker. The head was painted red at one time. I don't know if the color was original. The handle does appear to be original.


-
-
-
-
-
BAck in the 1970's I needed to reroof my old house, which had leaky old locking shingles on top of leaky old wooden shingles and no decking. Couldn't afford to redo it all properly, so skirted at the edge of legality and shingled over the top of it all. Since I needed long nails, I figured I also needed a big hammer, so although nearly broke, I treated myself to a big check-faced Estwing framing hammer. A great tool. Since then every time I see one going cheap, I get it, and have a few in varying degrees of wear. If I'm seeing correctly, at least one of those Estwings above is the closed-claw version, made for concrete form work. You can't of course dig it in, but it's the berries for pulling the double-headed nails used for forms, and the blunt semi-sharp end is great for breaking stuff off, chipping and prying and such, and of course not breakable. I have one of these, pretty heavily worn. They originally had a fairly straight end, but they get rounded with use. They are apparently pretty rare.
-
Expanding a little on those Estwings, here's a selection of the claw hammers. There are a couple missing. There's a newer smaller leather handled one that's all shiny and not here, and I think somewhere else is one with really ratty leather, and at least one shingling hatchet and a brick hammer not shown. But this is the main supply. On the left are a couple of the 28 ounce monsters, on the far right my first one, a 22 with milled face. That's the only one left with a milled face. At least one of the 28's was so beat up I reground the face. The blue one on the bottom is the uncommon closed claw one. Whenever I have some paint left over from some job I tend to paint tools like this so I can find them in grass, brush, and assorted debris.
I'm in the midst of a long term power failure, so pardon for the sloppy photography because there's no light in the shop.
[attach id=0 msg=2491960]

-
-
-
-
Nail placement seems a stretch, because framing hammers with magnetic nail holders are pretty common, and they work well to put a nail in place with a single blow.
It does look cool and I'd love to have one. If I did, I'd consider it a likely candidate for slate roofing, where a sharp point would be used to put a nail hole in a slate, which it does quite nicely, and the rest of the claw would still be available for pulling old nails. But what its actual use is, I'm uncertain.
It appears to have a label still on the handle. Is there a possibility of a manufacturer's name or model number etc.?
e.t.a. I just looked again at the picture, and I don't think it would do so well for slate roofing after all, because, although the prong is pretty pointed, it's still a bit flat. For poking nail holes in a slate you really want a sharp, round point. In the past I've used a fencing tool, but later found a body hammer with a pointed peen which I sharpened a bit more. But this does lead me to wonder whether the hammer in question would work well for fencing with the point good for pulling staples.
FURTHER e.t.a.....I just looked around, and though I did not find quite this hammer, I did find something billed as an electrician's hammer which has one elongated claw, made specifically for pulling Romex wire staples. This would also explain why it is, though narrow, a bit chisel shaped rather than round. So that's my best guess now. If you've ever had to pull Romex staples, the design makes a lot of sense.
-
@bruto said:
Nail placement seems a stretch, because framing hammers with magnetic nail holders are pretty common, and they work well to put a nail in place with a single blow.It does look cool and I'd love to have one. If I did, I'd consider it a likely candidate for slate roofing, where a sharp point would be used to put a nail hole in a slate, which it does quite nicely, and the rest of the claw would still be available for pulling old nails. But what its actual use is, I'm uncertain.
It appears to have a label still on the handle. Is there a possibility of a manufacturer's name or model number etc.?
e.t.a. I just looked again at the picture, and I don't think it would do so well for slate roofing after all, because, although the prong is pretty pointed, it's still a bit flat. For poking nail holes in a slate you really want a sharp, round point. In the past I've used a fencing tool, but later found a body hammer with a pointed peen which I sharpened a bit more. But this does lead me to wonder whether the hammer in question would work well for fencing with the point good for pulling staples.
FURTHER e.t.a.....I just looked around, and though I did not find quite this hammer, I did find something billed as an electrician's hammer which has one elongated claw, made specifically for pulling Romex wire staples. This would also explain why it is, though narrow, a bit chisel shaped rather than round. So that's my best guess now. If you've ever had to pull Romex staples, the design makes a lot of sense.
Hey Bruto and thanks for your reply! I believe slate roofing is a really good guess since the point is indeed round and quite sharp. I dont know how the picture came out that way..

Here ill post some more upclose pictures of the pike, label and stamp




-
Looks like a lineman's hammer. And I bet a pretty nice and expensive one too.
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
[attach id=0 msg=2490136]



