Did I hear the word Hammers?
-
Recently bought this hammer. Anyone know what the pike is for?? Looks flat on the picture but it is a sharp point. My best guess is to make an indentation for where you will put the nail but i have no idea
thought it looked cool and multipurpose :D1.1 Kg
35 cm
-
Nail placement seems a stretch, because framing hammers with magnetic nail holders are pretty common, and they work well to put a nail in place with a single blow.
It does look cool and I'd love to have one. If I did, I'd consider it a likely candidate for slate roofing, where a sharp point would be used to put a nail hole in a slate, which it does quite nicely, and the rest of the claw would still be available for pulling old nails. But what its actual use is, I'm uncertain.
It appears to have a label still on the handle. Is there a possibility of a manufacturer's name or model number etc.?
e.t.a. I just looked again at the picture, and I don't think it would do so well for slate roofing after all, because, although the prong is pretty pointed, it's still a bit flat. For poking nail holes in a slate you really want a sharp, round point. In the past I've used a fencing tool, but later found a body hammer with a pointed peen which I sharpened a bit more. But this does lead me to wonder whether the hammer in question would work well for fencing with the point good for pulling staples.
FURTHER e.t.a.....I just looked around, and though I did not find quite this hammer, I did find something billed as an electrician's hammer which has one elongated claw, made specifically for pulling Romex wire staples. This would also explain why it is, though narrow, a bit chisel shaped rather than round. So that's my best guess now. If you've ever had to pull Romex staples, the design makes a lot of sense.
-
@bruto said:
Nail placement seems a stretch, because framing hammers with magnetic nail holders are pretty common, and they work well to put a nail in place with a single blow.It does look cool and I'd love to have one. If I did, I'd consider it a likely candidate for slate roofing, where a sharp point would be used to put a nail hole in a slate, which it does quite nicely, and the rest of the claw would still be available for pulling old nails. But what its actual use is, I'm uncertain.
It appears to have a label still on the handle. Is there a possibility of a manufacturer's name or model number etc.?
e.t.a. I just looked again at the picture, and I don't think it would do so well for slate roofing after all, because, although the prong is pretty pointed, it's still a bit flat. For poking nail holes in a slate you really want a sharp, round point. In the past I've used a fencing tool, but later found a body hammer with a pointed peen which I sharpened a bit more. But this does lead me to wonder whether the hammer in question would work well for fencing with the point good for pulling staples.
FURTHER e.t.a.....I just looked around, and though I did not find quite this hammer, I did find something billed as an electrician's hammer which has one elongated claw, made specifically for pulling Romex wire staples. This would also explain why it is, though narrow, a bit chisel shaped rather than round. So that's my best guess now. If you've ever had to pull Romex staples, the design makes a lot of sense.
Hey Bruto and thanks for your reply! I believe slate roofing is a really good guess since the point is indeed round and quite sharp. I dont know how the picture came out that way..

Here ill post some more upclose pictures of the pike, label and stamp 👌😁


-
Looks like a lineman's hammer. And I bet a pretty nice and expensive one too.
-
That is one husky hammer. Talk about leverage with that long spike if you had to pull something. I like the braces on the shaft. Best wishes. G

-
I agree with Bruto's assessment. There is a hammer I could post. While it isn't anywhere near as nice as JowiiYoyo's, the price was right.
-
@bruto said:
https://en.flobyoverskottslager.se/collections/hammare-slaggor/products/hammare-linjehammare-tors-hammare-dansk-modell?variant=19417395232865Looks like a lineman's hammer. And I bet a pretty nice and expensive one too.
This is exactly where i bought it and where i got the first picture from. Tho i fail to understand how a lineman would have any use for the pike
🤔
I have tried google to find out the uses of the pike without succes and when i search for "linemans hammer" i find a bunch of other shaped hammers, none with a pike like this. So far slate roofing makes the most sense for me honeslty.

-
Just guessing here, but the site mentioned "telecommunications" so my guess would be pulling wire staples. You want a point that will go underneath the wire and pull the staple out without damaging the wire. Though I suppose also if one is installing phone lines and the like, it's occasionally nice to have something to poke or enlarge a hole.
But if I had such a hammer, and since I actually have a slate roof that occasionally needs repair, I'd likely use it for that, as the pointed peen auto body hammer (sharpened for the purpose) I generally use now is a little light for hammering and has no claw to remove old nails. Given that we don't know (or at least I don't know) just what sort of stuff a Danish or Swedish lineman has to deal with, alternate uses make sense.
-

Thats some good guessing Bruto. And thanks for all your inputs. I really do like the hammer and the hefty weight.

-
Cool hammer.
-
While we're on the subject here's a little variation on the nail holding hammer. I have a couple of framing hammers with a magnetic nail holding slot in the head, but here's one with a slot in the claw end, which holds the nail between a pair of spring loaded balls. It's ingenious and unlike a magnet does not fill with metallic fuzz. The idea was invented in the 1800's by a fellow named Cheney, who made some nice hammers (including, it seems, a single-claw staple pulling one!), Cheney's business was then sold to Prentiss (the one that made vises too), and Prentiss was then sold to Parker. Eventually, Parker was bought by Collins (the Machete people in Connecticut), and Collins was bought by Mann Edge Tools, which was eventually bought by Stanley Works. The hammer in question is labeled Stanley, and there's little record of how long they made it, but it's not very common.
This one has been re-handled, though I don't remember whether I broke the old handle or bought it broken. The current handle was originally part of the tiller on a sailboat.
The nail holder works quite well, and holds the nail a bit more firmly than the magnetic type, though it only works with larger nails. [attach id=0 msg=2494697]
P.S. yes the claw is chipped. I'm not sure Stanley gets full points for toughness here.

-
Neat hammer and a great story. More items to look for at estate sales.

-
I find I actually made a big mistake on that last hammer. I hurriedly read the label through the rust and thought it a Stanley (and Stanley did apparently make some like it) but it is, in fact, an original Cheney Hammer from Little Falls, NY. That dates it to some time before 1954 (I think the Cheney name continued for a while after the company was bought by Prentiss, etc.). Nice. And that may explain why its claws are a little ragged. It's been around a while!
-
Yeah, over 70 years old, you can expect a dent and ding or two.
-
One of the few items I brought home from a local estate sale is this uncommon Berylco H45 Inspector's hammer. The last photo shows the faint Berylco imprint on the original handle. I rarely see Berylco tools. Considering I live in Houston and Houston's oil industry history, I am a little surprised I haven't seen more.




-
Ive got a few


-
Nice assortment of hammers. That Estwing aluminum hammer is interesting.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
