Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Sad SAK Saturday

Scheduled Pinned Locked Moved Swiss Army Knights Forum
134 Posts 1 Posters 13.2k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • AzteCypherA
    AzteCypherA
    AzteCypher
    wrote on last edited by
    #29

    There looks to be some aluminum oxidation and perhaps some dirt. I'm hoping it just needs a real good cleaning and some oiling. I have a few others ahead of it that I've been working on cleaning, oiling, and sharpening but I may just work on this one first as I feel bad for it. Even with pliers I struggled to get the tools open.

    1 Reply Last reply
    0
    • IMR4198I
      IMR4198I
      IMR4198
      wrote on last edited by
      #30

      Might as well post a Sad SAK for today. I am actually carrying this one. I kept it out of the Surprise Box so I would have something I wouldn't mind scuffing up in my always questionable pockets. For the Delemont challenge of course. This is the good side. The other side is missing a scale. Tools have various issues. Completely usable regardless of appearance. It is a Wenger Handyman. Best wishes. Gary
      😞 [attach id=0 msg=2494939]

      weng handy.jpg

      1 Reply Last reply
      0
      • Farmer XF
        Farmer XF
        Farmer X
        wrote on last edited by
        #31

        :like: Do you have plans for scale replacement? New old stock Wenger scales, unfortunately, are quite hard to find.

        1 Reply Last reply
        0
        • IMR4198I
          IMR4198I
          IMR4198
          wrote on last edited by
          #32

          I will likely make a replacement for the missing scale. Not a high priority at the moment. I planned on carrying the thing during the Delemont Challenge but have since reconsidered. I will go with a different Wenger, I think. Best wishes. G
          😄

          1 Reply Last reply
          0
          • AzteCypherA
            AzteCypherA
            AzteCypher
            wrote on last edited by
            #33

            I'll readily admit, that this one isn't as sad as the others I've posted. However, being that it's an executive (and they are in short supply) I find it extremely saddening to see it in this condition. Though it does look like the previous owner tried to rectify the travesty by reshaping the orange peeler. The complete specimen is above and the atrocity is below.


            Yes, I understand I may be nitpicking...

            1 Reply Last reply
            0
            • IMR4198I
              IMR4198I
              IMR4198
              wrote on last edited by
              #34

              Someone gotched it up. A little. Still qualifies as a Sad SAK in my book. Incidentally quite high in the desirable carry index. It finally rained a few weaselly dribbles. Not even enough to get the grass wet. I noticed that all of NC was taken off the drought designation, due to heavy tropical downpours. There wasn't as much as a dark cloud here.
              Let's see..... I did the Delemont, See-through, and some other odds and ends. Time to post a 108 entry and then fix some breakfast. Best wishes. G

              1 Reply Last reply
              0
              • Farmer XF
                Farmer XF
                Farmer X
                wrote on last edited by
                #35

                @AzteCypher said:
                I find it extremely saddening to see it in this condition.

                It could be worse. Maybe Victorinox USA has a few replacement orange peeler on hand? :think:

                @IMR4198 said:
                I noticed that all of NC was taken off the drought designation.

                That's a good thing! :woohoo:

                1 Reply Last reply
                0
                • Juan el BoricuaJ
                  Juan el BoricuaJ
                  Juan el Boricua
                  wrote on last edited by
                  #36

                  A F/U to posts #21-22

                  Two down, and one to go. The "sacrificial Spartan" gave way to a new can opener to the std. Climber, and the corkscrew to my Deluxe Climber clone; still pending the small blade into the Explorer.
                  [attach id=0 msg=2495389]

                  20240903_220428.jpg

                  1 Reply Last reply
                  0
                  • IMR4198I
                    IMR4198I
                    IMR4198
                    wrote on last edited by
                    #37

                    I picked up this Wenger to carry during the Delemont challenge, but decided to EDC a Wenger Esquire instead. It has various issues. No scale tools, no scale on one side, etc. Still makes a perfectly usable pocky knife. Just a little sad. Best wishes. G
                    😞 [attach id=0 msg=2495829]

                    PXL_20240906_214904702.MP.jpg

                    1 Reply Last reply
                    0
                    • SwissterS
                      SwissterS
                      Swisster
                      wrote on last edited by
                      #38

                      Got this early 80’s Sexplorer Hoffritz edition today for $26. Not in love with it because it’s too thick to carry. Probably going to sell it

                      5DA96399-96B2-4D23-BAC7-C5367A3DF360.jpg

                      1 Reply Last reply
                      0
                      • IMR4198I
                        IMR4198I
                        IMR4198
                        wrote on last edited by
                        #39

                        Sad SAK at the laundromat. I think this was the grittiest knife that I have ever owned. I did a full body wash on it twice, and it was still gritty. Then I scraped the liners with wooden splints that were whittled from toothpicks and brushed the tangs with a toothbrush. Oh, I would say a couple of hundred times. Finally the black grit is at least partially gone. I thought about tumbling it wet in a rock tumbler, but there is abrasive embedded in the walls of the tumbler drum. Might do it anyway at some point. Best wishes. G
                        😞 [attach id=0 msg=2496703]

                        wengerwasher.jpg

                        1 Reply Last reply
                        0
                        • Farmer XF
                          Farmer XF
                          Farmer X
                          wrote on last edited by
                          #40

                          With the missing scale and all the grit and grime, that's definitely a project SAK!

                          1 Reply Last reply
                          0
                          • AzteCypherA
                            AzteCypherA
                            AzteCypher
                            wrote on last edited by
                            #41

                            I humbly submit for your review this... specimen. At one point in time, this was a Forester. Now, it's just a sad SAK.

                            Not sure what did this to it but it's pretty bad. Most of the tools are nail breakers, there's gunk inside, and the scales are melted. I initially thought someone ran it through the dishwasher but there's too much gunk in between the tools. I'm thinking it got to close to a heat source.



                            1 Reply Last reply
                            0
                            • IMR4198I
                              IMR4198I
                              IMR4198
                              wrote on last edited by
                              #42

                              Bravo, Aztec. Now that's sad. It makes me feel a little better about my sad Wenger. I can still open the blades on mine. You mentioned buying lots of old SAKs one time. I suppose getting some clunkers is only part of a lot purchase.
                              I thought we Western Carolinonians would garner some hurricane rain and maybe some odd wind gusts now and then, but no. Still dry as that high school history class. The ground has opened up in deep cracks like some crazy puzzle. I took a photo or two of the ground with a SAK lying on it. Some of the cracks are pretty wide. I started thinking.... what if my cute little knifey thing falls into a crack. Can't tell how deep these things are. Might have to dig it out or something. There is always the chance that once you start digging, the ground may give away altogether like ice on a pond. Small knife, IMR, and digging implement might be seen no more. Death and burial all in one. Brrr!
                              Best wishes. G
                              :oops:

                              1 Reply Last reply
                              0
                              • Farmer XF
                                Farmer XF
                                Farmer X
                                wrote on last edited by
                                #43

                                @AzteCypher: I think you're right about that poot little Wenger getting a little too hot. Is there anything on it that's salvageable?

                                @IMR4198: if you buy enough knife lots, you'll wind up with stinkers. I bought a knife lot that contained a cheap lockback whose blade can be folded without depressing the lock.

                                1 Reply Last reply
                                0
                                • AzteCypherA
                                  AzteCypherA
                                  AzteCypher
                                  wrote on last edited by
                                  #44

                                  IMR, your ground looks like ours did during the summer, yikes!

                                  This one did come from a large lot. It's definitely salvageable. We can either remove the scissors or replace them. The do the usual cleaning, oiling, and sharpening before swapping in some donor scales. There's still life in it for sure.

                                  1 Reply Last reply
                                  0
                                  • StevePS
                                    StevePS
                                    SteveP
                                    wrote on last edited by
                                    #45

                                    Here’s my Sad SAK story. I wish I’d taken a before picture…

                                    I picked up a pre-1991 Explorer (with gray-frame magnifier, no hook) for next to nothing at an estate sale about three years ago. The blades were very stiff, but I thought I could clean it. Nope. After removing the scales and soaking the rest in hot water and dish soap, then isopropyl alcohol, then mineral oil for two days, I still couldn’t open the blades without using something to pry them.

                                    It looked like the liners had oxidized. My guess was that the previous owner had left it in water, face down. The back plate looked nearly new and the corkscrew worked great. But the front plate was corroded all around the edges and the cap lifter and can opener were two of the hardest blades to open.

                                    Through one of my first posts on this forum I got some great restoration tips from some great members.

                                    By the end of the project it was usable again. The blades didn’t have the "snap" of a new SAK, but more importantly I could open them without a crowbar and actually use them. So I considered it a win and am happy that this poor neglected SAK could have a useful second life.
                                    :climber:

                                    1 Reply Last reply
                                    0
                                    • AzteCypherA
                                      AzteCypherA
                                      AzteCypher
                                      wrote on last edited by
                                      #46

                                      If you can have access to a sonic cleaner you could try cleaning it with that. I was able to get some snap back on one SAK that was pretty bad. Not as good as brand new, as it was a soft snap, but it was a snap none the less.

                                      I alternated between oiling the tools, working them back and forth, and then putting it in a sonic bath in warm soapy water for two 10min cycles. I'd let it dry out, re-oil, and run it through the sonic cleaner again. I did this three times and I was able to get a soft snap back.

                                      1 Reply Last reply
                                      0
                                      • lazarL
                                        lazarL
                                        lazar
                                        wrote on last edited by
                                        #47

                                        @AzteCypher said:
                                        I humbly submit for your review this... specimen. At one point in time, this was a Forester. Now, it's just a sad SAK.

                                        Not sure what did this to it but it's pretty bad. Most of the tools are nail breakers, there's gunk inside, and the scales are melted. I initially thought someone ran it through the dishwasher but there's too much gunk in between the tools. I'm thinking it got to close to a heat source.



                                        Impressive! :rofl:

                                        1 Reply Last reply
                                        0
                                        • IMR4198I
                                          IMR4198I
                                          IMR4198
                                          wrote on last edited by
                                          #48

                                          I lost the black Tinker that I posted a photo of last Tinker Tuesday. Lost it on a hunting trip. I retraced and tracked myself back until I finally found it. Several days later. There had been rain, and the SAK was on the ground. The blades wouldn't open. Oxidized liners. The blades weren't rusted yet but looked mottled. Oil and working the blades in and out freed it up again. Maybe another color knife would have been easier to find, but then again there are orange, red, brown, and yellow leaves all around here in the fall.
                                          The scales were looking sad again. I will post a photo of them after a little polishing on Tinker Tuesday. If I remember. Best wishes. G
                                          :hatsoff:

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World