Show Us Your EDC gear!!!
-
@G-Dizzle said:
That is a sweet flashlight. Mind sharing details? Also, nice taste in knives!
[attach id=0 msg=2495452]Thanks GD.
Compliments on your taste in knives too :-)
Thanks for sharing your neat edc.
Sure, here's some basics on the light.ReyLight Triple Ti Dawn 18650/18350 (via Ti tube extension)
Shown in 18350 format- Nichia 219C 4000K LED x 3
- 9 crown 2 switch all green Tritium vials
- Machined finish Titanium alloy
Had this light since 2019 … micro review …
Fit and finish is excellent
Output is as expected
No problems have arisen during use
UI is flexible and programmable
Customising the UI needs time to learn & program (Bistro UI)
Am happy with current bespoke settings
-
Today's carry, really enjoying the Diesel.

-
Nice carry, HF!

-
The pair that is almost always in my pocket.

Sent from my iPad using Tapatalk Pro
-
Thanks FX.
@Sos24 said:
The pair that is almost always in my pocket.
Sent from my iPad using Tapatalk ProHave never seen a voyageur SAK before. Thanks for sharing and do feel free to show a spread eagled pic LOL :-)
I had to go custom Cadet SAK to get a 91mm scissors installed (posted earlier in this thread) https://is.gd/DTyPVV.


-
@Heywood Floyd said:
Thanks FX.Have never seen a voyageur SAK before. Thanks for sharing and do feel free to show a spread eagled pic LOL :-)
I had to go custom Cadet SAK to get a 91mm scissors installedMine is not an original Voyageur either, it is also a custom with modded 91mm scissors

Sent from my iPad using Tapatalk Pro
-
That Opinel...
But what did you crack the walnuts with? 
-
@Farmer X said:
That Opinel...
But what did you crack the walnuts with? 
@pfrsantos said:
Do you really need to ask?!Spoiler:

:D :D :D :DThe above previous post Opinel is a No.8 carbon.
Below are the two No 8 pin stripe brothers. The darker is a Bubinga wood handle, suntanned with some flame and connected to a stainless steel blade.


I use my hands to crack the wall nuts. Two nuts is trivial and a single between two palms is harder but quite doable. If we're talking about cracking Macadamia nuts by hand alone, well that's way beyond my pay grade. -
Those Opinels are fantastic!
Somehow I doubt I could crack a walnut by hand...and now I'm wanting a walnut Opinel. :D -
@Heywood Floyd said:
The above previous post Opinel is a No.8 carbon.
Below are the two No 8 pin stripe brothers. The darker is a Bubinga wood handle, suntanned with some flame and connected to a stainless steel blade.


I use my hands to crack the wall nuts. Two nuts is trivial and a single between two palms is harder but quite doable. If we're talking about cracking Macadamia nuts by hand alone, well that's way beyond my pay grade.Did you do the work on these yourself? How much grinding was needed to fit the thumbstud? Thanks!
-
@G-Dizzle said:
Did you do the work on these yourself? How much grinding was needed to fit the thumbstud? Thanks!(If this is too long, mods please remove)
Yes I did work on these myself. The two part answer to your questions …
First the simple "Checkering" tool from my youth and the handle pin striping then the thumb stud. Lastly a short vid of it in real life.Part 1 • The Handle


Many years ago and well before yours truly had become a teenager, I was enamoured with firearms. Gees, I could recite projectile weights, load in grains, muzzle velocities, distance drops of my favourite cartridges and shoot pretty well too. Gun design and gunsmithing looked very interesting and so set my mind to modifying the stock of my Gecado air rifle. That meant making a tool to make it happen so whilst in my Dad’s workshop, I stole a welding rod (manual metal arc stick), beat the flux off it and wire brushed it at one arbor end of a stone grinder. Next formed it with heat from an oxyacetylene kit to get a desired handle bend and with hammer flatten what would become the cutting end. The cutting head got finally formed with some fine files and heat treated via oxyacetylene and oil. I tried firstly with water but over heated the rod material and cracked it via thermal shock.
If you’ve come this far, so what is the significance of this recount. Well, I still have that tool and it is what was used to put the pinstripe pattern on the Opinel shown.
On a personal note, my Father was incredibly gifted at making steel do what he wanted. He happened to be working on a project and in a sincere effort to be like him I took on my big checkering tool project at the same time. What a laugh in retrospect and yeah those were wonderful times.
My very old amateur "Checkering Tool"

Part 2 • The Thumb Stud
Here’s my current thumb stud solution …


In order for the KWIK thumb stud to sit properly I had to remove a modicum of handle wood. That is so the grub screw could at least completely bite the blade, the blade could land fully in the handle and when open the recasso (not the stud) acted properly as the stop. That locus point necessitated the simplest of handle mod pictured.



btw, the KWIK thumb stud also acts as a neat thumb ramp when the blade is deployed.
Operating the Opinel swivel lock with thumb and forefinger is not a problem with one hand.No 8 Carbon Steel result …
https://www.youtube.com/watch?v=fJm5ttunajA
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login










