Delemont challenge September 2024!
-
Day 17
Classic 66 = Classic 63 (Entree) + saw
Great, lightweight outdoor companion. Similar to Vic Walker. The Walker looks more elegant with its thinner scales and more pointy and less deep saw (the Wenger saw protrudes a bit unsightly from the side view), but the addition of corkscrew makes the Classic 66 a clear winner for me vs the Walker.




-
Day 17 - Soldat (dated 04)
Second of my two Soldats today….being a collector had to have one with a date stamp and one without
:ahhh

-
Day 17
Finally, some rain here. I'm sure all the little frogs that hatched out during the summer and never learned to swim have drowned by now. I sweated yesterday. Some brainless boob must have been burning leaves or brush or something. I could smell the smoke and got visions of fleeing for my life until the fires go swoosh over me and turn me into crispy fritter configuration. I did use the Wenger saw a couple of times. You would think a saw on an 85mm might not work so well. Actually, the saw has teeth clear to the end almost and worked pretty well. I sawed off this maybe three quarters of an inch dead overhang. Seasoned wood cuts harder than green. The Handyman coped with it. I also cut off a sprig or two of holly. A little harder time than my 108mm. Best wishes. G:D [attach id=0 msg=2497085]

-
Day 17 - part2
After 4 days of heavy rain (unfotunatelly some parts of the country are heavilly flooded, but my city is not impacted), the sun is back so we had good evening time on the balcony - classic 66 cut the bread, cheese and ham and opened bottle of strong belgian beer (not my usual treat - normally I prefer lagers/pilsners or IPAs).

-
Day 17 of 30
Today i carried Vic Delémont RangerGrip 71 again. Used blade to slice apple for my daughter.

Only Tools Matters
-
Day 17
Scissors cut some construction paper to make it fit in a die cut machine at work. The Wenger scissors are nice for firmer stuff like this.

-
Day 17
EVO 14 scissors helped cut down a few supports for granddaughter’s school assignment , of heavy construction paper.
[attach id=0 msg=2497203]

-
The main takeaways for today: I forgot to declare that I own the Evolution 23 because Mrs. FX thought I should have an SAK with a magnifier, I should see if that Evolution 23 uses a Victorinox or Wenger type of saw, and I have to wonder how strong that Belgian beer was. (The strongest beer I've ever had was 14% ABV.)
Another great day, y'awl!

Day 17
A pair of Highlanders.
to AzteCypher for sending them to me, and
to me for breaking a toothpick off in that logo scale. (Part of that toothpick remains impacted in there.)[attach id=0 msg=2497215]

-
Day 18
Maxlvledc has posted a great video explaining things for the Flex, as well as tips. With no modification at all, you can get two long tools in one side. So I put the saw next to my blade.


-
@ReamerPunch said:
Day 18Maxlvledc has posted a great video explaining things for the Flex, as well as tips. With no modification at all, you can get two long tools in one side. So I put the saw next to my blade.

You seem to be really impressed with the Flex!
-
Day 18 - Wenger Tahara Mod 1908 P
Apart from being a bit of a nail breaker as a lot of these oldies are, it would still make an excellent carry. Blades quite sharp and the tools are rock solid


-
Day 12
Wenger and Vitorinox :D
i used the flat driver during this Vic scissors service [attach id=0 msg=2497247]
-
I really am. I was a fan of Roxon ever since their first multi-tool, the Storm. Even now, with everyone making Wave and Surge look-alikes, Roxon made the Flex, and it is just excellent. I might bother buying a new laptop, just so I can get back to reviewing tools.
-
Day 18
Back to the blue - Classic 62.

-
Day 18
Just like last month's challenge. The first ten days dragged away. Mountain ranges rose and were eroded away. Rivers dried up. Civilizations grew, prospered, and fell while the sands covered up the ruins. Then some unseen hand on a giant rusty lever somewhere threw everything back into high gear again.
I need to fix some breakfast. No leftover pizza or anything just lying around. Refused to pay the store's extorted prices for eggs, so I can't have that. Finished off the counterfeit rice crispies last week. No fruit. Bacon? Sausage? Ham? I have vague remembrances of those things. Maybe I just imagined them. Probably in a dream. Rice? No. You really can't go home again.
I'll think of something. Might make some cinnamon toast. How about another Wenger photo with some fall weeds in the background? Yeah. Best wishes. G
:( [attach id=0 msg=2497264]
-
**<u>Day 17</u>**Posting a day late.
When I acquired this Serrated Traveler it was in pretty rough shape. It had definitely seen better days. After multiple cleanings and oiling, all the tools are functional with at least a soft snap. The back scale is a little lifted from one end but it's definitely on there. Perhaps too close to a heat source? There are no scale tools on this one. I'm not keen on the 60/40 serration but I find it interesting so it's earned a place in my collection.

-
Do you think the serrations were factory made or was the blade modified by an owner of the knife?
Also, it appears there is good amount of metal removed when looking at the choice. And cuts toward the tip appear to be shallower, or it maybe the camera angle.
I have a Spartan with a serrated blade, and the entire blade is serrated with the same cuts.
And my OHT, the serrations are at the tip working back to about 60%, also the same cuts.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
