Sad SAK Saturday
-
If you can have access to a sonic cleaner you could try cleaning it with that. I was able to get some snap back on one SAK that was pretty bad. Not as good as brand new, as it was a soft snap, but it was a snap none the less.
I alternated between oiling the tools, working them back and forth, and then putting it in a sonic bath in warm soapy water for two 10min cycles. I'd let it dry out, re-oil, and run it through the sonic cleaner again. I did this three times and I was able to get a soft snap back.
-
@AzteCypher said:
I humbly submit for your review this... specimen. At one point in time, this was a Forester. Now, it's just a sad SAK.Not sure what did this to it but it's pretty bad. Most of the tools are nail breakers, there's gunk inside, and the scales are melted. I initially thought someone ran it through the dishwasher but there's too much gunk in between the tools. I'm thinking it got to close to a heat source.



Impressive!

-
I lost the black Tinker that I posted a photo of last Tinker Tuesday. Lost it on a hunting trip. I retraced and tracked myself back until I finally found it. Several days later. There had been rain, and the SAK was on the ground. The blades wouldn't open. Oxidized liners. The blades weren't rusted yet but looked mottled. Oil and working the blades in and out freed it up again. Maybe another color knife would have been easier to find, but then again there are orange, red, brown, and yellow leaves all around here in the fall.
The scales were looking sad again. I will post a photo of them after a little polishing on Tinker Tuesday. If I remember. Best wishes. G

-
@IMR4198 said:
I lost the black Tinker that I posted a photo of last Tinker Tuesday. Lost it on a hunting trip. I retraced and tracked myself back until I finally found it. Several days later. There had been rain, and the SAK was on the ground. The blades wouldn't open. Oxidized liners. The blades weren't rusted yet but looked mottled. Oil and working the blades in and out freed it up again. Maybe another color knife would have been easier to find, but then again there are orange, red, brown, and yellow leaves all around here in the fall.
The scales were looking sad again. I will post a photo of them after a little polishing on Tinker Tuesday. If I remember. Best wishes. G

Oh no! Not the black Tinker! I'm glad you found it. What were ya hunting? Squirrels? Rabbits? Sasquatch? I hope you found some success. I'm going to try to get my little boy out in the woods in search of a black bear next weekend.
I've only got one that will qualify as a Sad SAK right now. It's actually an old Wenger that lived on my keychain forever. Now, it is living out its retirement as my desk knife.


Sent from my SM-S908U using Tapatalk
-
That was several years ago. The black Tinker that doesn't have a key ring nub is my late Dad's knife. My sister bought both of us identical black Tinkers in Switzerland. No deer that day. Best wishes. G

-
Oh whoops! I read it as you lost it last Tuesday.
Sent from my SM-S908U using Tapatalk
-
I am not known for my clarity. Best wishes. G
:D -
Wenger Handyman and some Red Rose tea. I remember the fragrance of tea brewing from years ago. Red Rose doesn't have much scent for some reason. I still have some Numi Honeybush (good), and some chamomile, I think. Somewhere. Haven't had chamomile in a long time. When the weather cools, I feel more like hot drinks. Best wishes. G
:D [attach id=0 msg=2497595]
-
I'm more inclined to drink hot coffee as the temperature outside drops to that of my freezer. And if I have to shovel snow, having some soup afterwards is a real morale booster.
-
Going to post a few minutes early.
This Basic 63 led a rough life before it came to me. One end looks like they used it as a blunt instrument. I managed to get the tools loose with most of their snap back. The blade is nice and sharp again but there is some pitting close to the front of the blade.



-
I think I used this photo to finish off my Delemont challenge already. Anyway it is appropriate. And sad. Best wishes. Gary
[attach id=0 msg=2499334]
-
A Tale of Two Multis..... One sad, one glad. The Wenger came out of the Surprise Box. I kept it to have a beater to carry during the Belemont deal. The pretty alox is a Bantam. A gift from a friend. And my only alox. Best wishes. G
[attach id=0 msg=2500001].jpg)
-
And I'm thinking one of my Sad SAKs will soon be headed to Connecticut so it can be happy again. -
May not compete with m that...specimen...from Aztec, and I've told this story here several times before, but here is my first Swiss Arny Knife. A Victorinox Super Tinker. Carried many years and places from the late 80's until about 2012 when it went off a 3 story roof, landed in the parking lot of this industrial building and was run over by a truck.
See the old, solid scales, where they are scratched up by the aggregate in the pavement, and where the metal Vic inlay was peeled back a bit. The layers were squished closed at each end and I could not open any tools at all.
I put it away in a drawer after receiving a Tinker Deluxe as a gift later that year. It sat, and got rusty, even.
After coming here I learned to repair it. I had to pry the layers back open as they were completely hammered and closed. Learned that replacement scales were a thing. But even the replacement scales, one end of one scale can not snap over the worn down brass pin.
But it's still much better now and I still carry it sometimes.
[attach id=0 msg=2500079]
[attach id=1 msg=2500079]

-
Poorly sharpened mid 1990's (?) Black-scaled Tinker with Boy Scouts of America inlay. Got it at a flea market, guessing some kid tried to sharpen it in a circular fashion. I couldn't polish it out by hand but cleaned it up a little. It would be a perfect "user" if the BSA symbol were not metal inlay.
[attach id=0 msg=2500233]

-
Two nice sad SAKs there Thunda. Lots of good use still in them. Best wishes. G

-
Thundah, perhaps using wet or dry sandpaper you may? I've done some, and has had "respectable" results going from 600, 1000, 1500, 2000, and a final polish with a metal polishing cream( in my case, Blue Magic Metal Polishing Cream); I also use a solution of dishwashing liquid and water for lubricant, and to prevent the paper from clogging.
Here's my most "extreme case", an Explorer whose blades were gouged; I try to pick the gouge's remnants in the pictures. [attach id=0 msg=2500238] [attach id=1 msg=2500238]

-
I think I have run out of Sad SAKs. Might as well post a photo of the Sad SAK that I am carrying. Years take their toll. Both scales are loose at one end and one is split as well. Still serving, as Sad SAKs do. Best wishes. G
:D [attach id=0 msg=2500920].jpg)
-
@IMR4198 said:
A Tale of Two Multis..... One sad, one glad. The Wenger came out of the Surprise Box. I kept it to have a beater to carry during the Belemont deal. The pretty alox is a Bantam. A gift from a friend. And my only alox. Best wishes. G
[attach id=0 msg=2500001]That Wenger still functions perfectly, yes? Kind of a fan of the scaleless look now.
My only alox is a Pioneer from just a few years ago. I like the alox. Wish they had back tools
-
Yes, the old beast still works. It still has one scale mostly intact. Some time or other I will make another scale for it and glue it on. I leave it on my computer desk for general knife related activities. Members talk about throwing old ratty knives away on MTO now and then. Doesn't do anyone good in the landfill or tossed in the creek. Still useful. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login