My 3DC
-
I had much the same thought. The break was definitely the result of layer adhesion- or rather lack thereof. I've been noticing that different filaments from different manufacturers have very different results when it comes to layer adhesion-.
I have printed another version of the blue Wave sheath above and you can hear the belt loop crack when applying even the slightest pressure, versus the blue one that is quite solid feeling. Same machine, same file, different filament.
Overall I don't have a lot of faith in these sheaths, although I have worn the blue sheath a few times for testing and it seems to have held up fine.
You are right though, seperate pieces printed in directions with optimized layer axis makes a lot more sense. Its also a good opportunity for me to learn how better to work with other people's files, something I haven't had a lot of success with yet.

Def
-
@Grant Lamontagne said:
I had much the same thought. The break was definitely the result of layer adhesion- or rather lack thereof. I've been noticing that different filaments from different manufacturers have very different results when it comes to layer adhesion-.I have printed another version of the blue Wave sheath above and you can hear the belt loop crack when applying even the slightest pressure, versus the blue one that is quite solid feeling. Same machine, same file, different filament.
Overall I don't have a lot of faith in these sheaths, although I have worn the blue sheath a few times for testing and it seems to have held up fine.
You are right though, seperate pieces printed in directions with optimized layer axis makes a lot more sense. Its also a good opportunity for me to learn how better to work with other people's files, something I haven't had a lot of success with yet.

Def
Some of these filaments are also glue friendly so laminating different directions could be an idea?
Resin printers have less directional challenges than filament ones. (I have some resin that is supposedly ABS like, and sounds suitable for tasks like this, but I haven't had any excuses to use it yet).
-
I've been drooling over the idea of getting a resin printer for a while. I keep thinking about buying a second hand one that comes with the UV curing station and so on, as it seems simpler to buy the whole setup rather than try to figure it out for myself.

I am also give ng serious thought to upgrading to a Bambu Labs filament printer. Mine has a small build area (150mm cubed), is restricted only to PLA and doesn't have a heated bed. Its also restricted to its own software, and the company has gone under so no updates, fixes etc, and I'm stuck with the very limited options for customizing things like layer height, temperatures etc.
Its a great machine to play with, but I'd like to take my builds to the next level.
Def
-
I really can’t say enough good things about the Bambu Lab printers. I bought an X1 Carbon a couple of years ago to use as my “printer of last resort”: I’m constantly tinkering with my other printers, so they may or may not be in a usable state at any given time, but since everything is proprietary on the Bambu printers, I won’t be tempted to tinker with it and therefore it will always be available to print rescue parts to fix the others.
That was the plan, anyway; instead, it rapidly became my primary printer, because it’s just so much easier to work with and produces such excellent results. I’ve had a half-built RailCore II ZLT sitting unfinished for almost 18 months now because the Bambu works so well that I just haven’t had any sense of urgency.
The best way I’ve seen it put is that Bambu printers are loved by people who print things for their hobbies and loathed by people whose printers are their hobby. Turns out that I’m more of the former than the latter, when all is said and done.
-
I originally bought the first 3D printer (a filament one) to make metal prototype parts via lost wax casting. Basically you 3D print what you want as a wax model which get surrounded by a mould material and melted out - metal is then poured in to fill the space where the wax used to be. (This is a few deep rabbit holes in itself).
Although I did find some usable wax filament there were issues with practical resolution, uneven scaling of measurements and other geometric issues like flat not being flat enough and so on. Thus I gave up on filament printing fairly early for this, although I have used it for some other tasks later on. The first resin printer I got fixed the resolution issue, but uneven scaling and other inaccurate geometric features like bent flats remained to some degree. Which eventually led me to a DLP based resin printer. Scaling is consistent enough for my use, and the geometric precision is way better.
For many doing 3D parts like miniatures and the like it isn't all that relevant, but for me making tiny parts fitting together it is a critical feature for the use I intended. So if anyone has the same needs those are my experiences with those various technologies. (I've also used a few commercial direct to metal 3D print services for prototyping - that is a very nice way to save yourself hassle if you only need a few parts).
But thinking back as it used to be: Amazing possibilities these days!
Edit: I've also been thinking about using 3D prints as forms for glass- or carbonfiber parts. And it would be interesting to make a electric conductive form (that can later be melted away) and add thick metal plating using electroplating. One should be able to make some really intricate parts that way.
-
My current unit is an XYZ Printing Da Vinci Mini W+. It was inexpensive and I got it on sale at the big blue box store. Its a good machine to use right out of the box, and decent for anyone not wanting to tinker.
That having been said, it relies almost completely on its own proprietary software and it's very limited.
I had a smaller one, I think the M3D? I didn't much care for it. It was too small for pretty much anything, no heated bed and no auto leveling.
Prior to that I built an Anet A8 that was great for what it was, but again, no bed leveling and no heated beds. There were various kits to upgrade it, but in the end it went to my nephew's son. He likes tinkering with stuff- I want to mess around with building stuff, not with the equipment that builds stuff.
Def
-
@Grant Lamontagne said:
I want to mess around with building stuff, not with the equipment that builds stuff.I want to mess around with building stuff, not with the equipment that builds stuff.Totally with you on that one. I'm sure 3D printers are interesting to tinker with as such, but for me they are tools. Thus I look for ease of use, predictable and good results, economy and reliability. And they have come a long way towards that since I got my first one in 2016 or so. Future models will surely be better yet

-
@Grant Lamontagne said:
He likes tinkering with stuff- I want to mess around with building stuff, not with the equipment that builds stuff.You're definitely the target audience for the Bambu printers, then. If it's inside your budget, I'd recommend just going with the X1 Carbon: it's pricey but you get your money's worth in both the reliability and capability of the machine itself and the additional safety/verification features that can detect problems, halt the print and alert you if something starts to go off the rails. It's as close as you get to "it just works" in 3D printing, at least for a budget under six figures.
-
I run the original Ender 3 that my wife got me a few years back for a Christmas present. I slowly upgraded it as I learned more about it and it's fun tinkering with i. Now, I'm really interested in the Bambu X1 carbon, especially since it can print in nylon and carbon fiber. I've been itching to try and print a manifold adapter for some ITBs.
-
@Cypren said:
You're definitely the target audience for the Bambu printers, then. If it's inside your budget, I'd recommend just going with the X1 Carbon: it's pricey but you get your money's worth in both the reliability and capability of the machine itself and the additional safety/verification features that can detect problems, halt the print and alert you if something starts to go off the rails. It's as close as you get to "it just works" in 3D printing, at least for a budget under six figures.That is the one I have been drooling over. I was thinking the P1S but I have decided that it is worth the extra $$ to have the option to print in carbon as well. I feel like if I take that plunge, I might as well go all the way with it. I also like the idea of being able to expand it in the future with the AMS units, so I can keep it loaded with all kinds of different materials and colors.
I also think using Cura instead of the XYZ Printing software will make a huge difference in setting things up. I miss Cura.

Also, I have had three different 3D printers and I have committed the ultimate sin.
I have never printed a Benchy.
Def
-
@Grant Lamontagne said:
Also, I have had three different 3D printers and I have committed the ultimate sin.I have never printed a Benchy.
You're clearly a maverick rebel fighting the system, man, alluminati and conventions in ever so subtle ways.
I'm sure the world has enough Benchies anyway.

Edit: I see my brain got twisted there, but if alluminati isn't a word yet it should be.
-
It amus a me that many printers are rated by how fast they can crank out a benchy, which makes sense since it's a benchmark they can all be measure eachother against....
But I've never done one.
Maybe I should, just so I can see how much better a Bambu Labs model would be over mine.

Since I have decided that my life is too cluttered already, I have been avoiding printing decorative things, toys, figures that kind of thing. Instead, I've decided to for the most part anyway, only print useful items.
For the most part I have stuck to that. Although there were a few figures I did print off for my amusement and I printed a sheet of chain mail just to see what it was like. It's not a hard and fast rule but it's something I do try to stick to.
That having been said the other day I tried printing a model of Samhain for Megan since she's a big Halloween person. Unfortunately it was very teeny so I scaled it up and I'm printing a second one. This time I am using the multicolored filament which I think will add a lot to the figure.
I started the print last night and this is what it looked like when I left for work this morning. So far so good. I hope the rest of it is not a spaghetti monster when I get home.
Def


-
That's pretty cool. Is that the one from 3D cults?
I downloaded this ghostie to 3D print for our trick-or-treaters this year.
-
It might be. I got it from Thingiverse.
I have a few things from Cult3D but my go to sites are usually Thingiverse and Printables.com. The only things I have really gotten from Cult3D are some o-ring action figures, like a Boba Fett an Eddie from the Aces High cover. I've had very limited success with those small, intricate parts, and I can't help but feel that a resin printer would be better than filament for that kind of thing.
Def
-
@Grant Lamontagne said:
It amus a me that many printers are rated by how fast they can crank out a benchy, which makes sense since it's a benchmark they can all be measure eachother against....Are filament 3D printers so similar/ good these days that speed is the key difference? I printed a Benchy or 3 when I got the filament printer, but the thing back then was as a quality and capability check more than anything. At least I thought it was.
-
I am not sure, I just see different sites talking about making benchys faster and with greater detail than ever before.
As I've never made one, I can't honestly say whether mine is competitive or not
I did however finally finish making this Samhain for Megan. I am thrilled with how well it turned out and I think she is very much going to like it.
If she doesn't, look for me on Tinder! :D
Def

-
Another pic with the supports removed.
Def


-
That turned out well. Interesting filament effect.
-
That looks pretty cool especially with the multi color filament.
-
@Grant Lamontagne said:
I also think using Cura instead of the XYZ Printing software will make a huge difference in setting things up. I miss Cura.
If you get the X1, check out OrcaSlicer. It’s an open-source fork of Bambu Studio, which is itself a fork of PrusaSlicer. It does a great job of supporting the bleeding edge of 3D printing features while also supporting all of the proprietary tech in the Bambu printers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login