Leatherman Signal challenge: October 2024
-
Day 3
So yesterday, I did use the Signal to break down boxes that came in. In total I broke down about five or so. The Signal performed admirably. Some quick observations was that I did experience some hot spots on my hand after the five boxes I broke down. I did get pinched once by the carabiner opening. I would say, if you are doing a lot of cutting wear some gloves. After the boxes were broken down, I did a Quick Look at the edge and it held up well. Edge was still sharp and would have handled more use before a touch up. Did get quite a bit of tape residue on the blade which was expected. I didn’t see any chipping. More to come.
JonesE
-
Day 3
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


-
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]

-
Nice and quick mod Rich. I find it makes the Signal more urban friendly.
JonesE
-
Day 3
Decommissioning and, scavenging of salvageable parts from an old, curbside bike. Sadly, the bit/tweezer holder got out of commission as the pliers loosened grip and the top-mount bit holder slammed onto it, breaking off the tip that held it on the handle's cutout and rendered it "unclipable"; you win some, you loose some. I'll see what can be done to salvage it. [attach id=0 msg=2499080]

-
Nice and quick mod Rich. I find it makes the Signal more urban friendly.
100%, and sleeker looking too! -
@m47mu74nt said:
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]
Don't know which I like more, the Rover or the Signal! :ahhh

-
Day 3
Boxes. So much the boxes.
[attach id=0 msg=2499107]

-
So yesterday, I did use the Signal to break down boxes that came in. In total I broke down about five or so. The Signal performed admirably. Some quick observations was that I did experience some hot spots on my hand after the five boxes I broke down. I did get pinched once by the carabiner opening. I would say, if you are doing a lot of cutting wear some gloves. After the boxes were broken down, I did a Quick Look at the edge and it held up well. Edge was still sharp and would have handled more use before a touch up. Did get quite a bit of tape residue on the blade which was expected. I didn’t see any chipping. More to come.
JonesE
Boxes can take their toll on a blade
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


I have one on its way to use in place of the sharpener. Still debating on the one for the whoste/ferro rod because I sometimes use the ferro rod for making coffee just for fun.
@Juan el Boricua said:
Day 3Decommissioning and, scavenging of salvageable parts from an old, curbside bike. Sadly, the bit/tweezer holder got out of commission as the pliers loosened grip and the top-mount bit holder slammed onto it, breaking off the tip that held it on the handle's cutout and rendered it "unclipable"; you win some, you loose some. I'll see what can be done to salvage it. [attach id=0 msg=2499080]
Sounds like a challenging day for the Signal
@m47mu74nt said:
Day 3:
"High vis" with a homemade Lego firefighter 4x4, based on the yellow Land-rover Defender model from Lego Creator (only stickers, wheels and a few other pièces are still from the original model)[attach id=0 msg=2499058]
Very cute Lego truck
-
The Signal was on coffee making duty.
First opened the fresh bag of coffee, then battening some sticks into smaller pieces using the hammer on the Kodiak.


-
@ SOS , great pictures and use. Getting my coffee now!😉
-
Neat mods and fantastic Lego Landy...and I'm having some coffee with lunch!

Day 4
One Signal feature I won't take advantage of is the sharpener. I've said before, and I'll say again, that my sharpening skills are somewhere between lacking and nonexistent. But I can see it being useful for sharpening serrations.
[attach id=0 msg=2499169]

-
-
Day 4
Another reason that I have stayed away from the Signal is that I almost never need a mutitool saw. I'm sure it's very handy for camping, and that is the Signal's focus, but in my normal life I think I have used a multitool saw only a couple times. For my next easy mod, I'm going to replace the saw with something more useful to me. The easiest would be a diamond file from a Wave. I could also replace it with scissors from a Wingman. I have extras of both, so I can't decide.


-
Day 4:
Didn't do anything but opening packages todayTook an unrelated picture and couldn't find the right shade of blue and pink
[attach id=0 msg=2499186]

-
Time for an easy "mod".
I'll never need a ferro rod or signal whistle during my normal life. Also, as much as I like and use Leatherman diamond-coated files, the one on the Signal is too small for regular use. I picked up some replacement parts from Etsy for those 2 tools that hold extra bits and a Vic tweezer.
Here's the kit:

Here's the parts with the bits they will hold:


Here's where the tweezers go:


It came with a thumb stud too. I don't normally like them, but I'll give it a try:

The final product:


Okaaaay, I absolutely need this.
-
Day 4
Not much going on other than opening packages of new-to-me-goodies: Original Wave sheath, Stayglow Climber and an MP400.
[attach id=0 msg=2499208]
-
M47, you DO need them; they've been THAT good to me that 3 out 5 of mines sport them!
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

100%

