Off-brand October Challenge
-
Day 1
I'll be using this Roxon Storm (S801S "revised) as my main tool this challenge. The distinguishing feature is the double butterfly to have largish scissors and pliers in the same tool. I tested the scissors on both thin and thick materials today (holiday catalog paper and a clam pack).
They did very well on the paper, but just ok on the clam pack. I think some of it was technique. You want to make sure the narrow handle is the one going into whatever your cutting, since it doesn't get in the way as much.
Looking forward to testing it out this month. It seems well put together and is certainly an interesting tool.


-
Nice Roxon!

Day 1
I like the Flex a lot.

-
Day 2
I like the ReamerPunch so much.


-
That's a nice awl. Wish they'd put that one on the Storm.
Day 2
Storm opened its partner in crime for the month, a Ruike S31. When Vic discontinued the Executive, a few people suggested this as an alternative, presumably thanks to the gut hook/driver. It'll ride on my keyring for the month, and we'll see how it fairs as a replacement for the Exec that's usually there.

-
Oh, Ruike makes small models too? :ahhh
That looks really nice. I only have a large Ruike, I might look around...Day 3
Got some dinner


-
Officially, the Ruike multitool line is:
Small- 71mm, the S31 is the "Champ" for the line, with all 3 of the available tools.
Medium- 96mm, the basis for most of the Boker City/Tech tools.
Large- 114mm, some with OHO studs.I only have the S31, since the tool pool for the larger sizes seems pretty shallow (NO CAN OPENER!)
-
Yeah, very true. My LD-51 has a good load-out, but instead of a nice can opener, or something else, it has that awkward short, angled serrated blade with flathead. I'd rather have a claw can opener, or even a quarter-circle, or a package opener, or a smaller plain edge with no angle.
-
Day 3
Used the pliers to fix my lanyard at work. I lost it in the parking lot last month, and it probably got runover. No biggie to bend back into shape with the Storm.

-
Day 4

-
Following along carrying an imaginary clone multi. Enjoying the nice photos. Best wishes. Gary

-
Which one? ::)
I'm gonna rock the Flex for the whole month I think. I will be moving into a new place in a couple weeks, so things may get... challenging.

-
Today I am carrying my Roxoff Centaur. It is sort of an imaginary cross between a Leatherman Wave and a hobo knife. True story time now. My old Uncle Rob showed me his multi-tool once upon a time. He found it in his garden. It looked like a little Crescent wrench and had a few fold out tools. The wrench and body of the tool looked like a plated zinc casting. One of his neighbor's grandkids probably dropped it there. Or maybe threw it. Rob thought it was something special, so naturally I had to appreciate it as well. He drove until he was 94 and rear ended someone at a stop light. The judge said, "What are you going to do, Rob? Drive until you are 100?" Then he asked to see my uncle's driver's license. And kept it.

-
Day 4
Showing off the goodies that come with the Storm. Holster is a standard nylon job. Feels decently sturdy, horizontal or vertical attachment, has a little pouch inside for the bits, good snap.
The bit set contains: Hex 3-6mm, Flat 3&4mm, Torx 5, and Phillips 1&2. It's a fair set overall; I might take one or two less Hex for another Torx or Phillips, but it's not an unreasonable combination. Note that this is NOT the same set Roxon sells, which consists of: Phillips 00, 0, and 2, Hex 3&4mm, Flat 2mm, and Torx 6, 8, and 10. I'd probably take about half of each ideally.
As an extension of the base set, nothing really exciting there (they're just 1/4" bits, you can get a lot more for the price). But, for under $10 it might be worth it for the adapter. LM and Gerber's sets both go for more (and are often out of stock), and single bit adapters can easily go for half that price. The Roxon will fit LM and Gerber (not quite as clean as first party, but more than usable). LM and Gerber will fit the Roxon as well if that's relevant to you.
Overall, pretty happy with the accessories Roxon provides.

-
@BPRoberts said:
Day 4Showing off the goodies that come with the Storm. Holster is a standard nylon job. Feels decently sturdy, horizontal or vertical attachment, has a little pouch inside for the bits, good snap.
The bit set contains: Hex 3-6mm, Flat 3&4mm, Torx 5, and Phillips 1&2. It's a fair set overall; I might take one or two less Hex for another Torx or Phillips, but it's not an unreasonable combination. Note that this is NOT the same set Roxon sells, which consists of: Phillips 00, 0, and 2, Hex 3&4mm, Flat 2mm, and Torx 6, 8, and 10. I'd probably take about half of each ideally.
As an extension of the base set, nothing really exciting there (they're just 1/4" bits, you can get a lot more for the price). But, for under $10 it might be worth it for the adapter. LM and Gerber's sets both go for more (and are often out of stock), and single bit adapters can easily go for half that price. The Roxon will fit LM and Gerber (not quite as clean as first party, but more than usable). LM and Gerber will fit the Roxon as well if that's relevant to you.
Overall, pretty happy with the accessories Roxon provides.
It's like they had a good idea but just missed the mark with that blade design. I've been using mine too, but I keep thinking a better one would save a lot of hassle.
-
What do you dislike about it? Seems like a decent tanto to me.
-
Day 5
And as soon as I stick up for it, the Storm fails.
[attach id=0 msg=2499297]
That's the saw bent "backwards" past the stop after trying to take the lid off a pumpkin. I was able to force it back into position, but not without a lot of wobble.
The bit set that it comes with doesn't have the right bit (T10) but my bit set at the camper does, so I took out the screw (I do appreciate user serviceable tools) took the saw completely out, rinsed and wiped everything, and put it back together. It feels a lot better now than it did from the factory (smoother but tighter, and it seems to lock in better) so I'm wondering if there was an error in assembly. I adjusted several other screws on the tool and most of the tools feel better now, deploying better in spite of the fact that I tried to leave them as tight or tighter than I found them. Everything just feels lined up better.
I tested the saw on several branches around the camp site without issue. I guess the lesson here is to jimmy all the screws when you get a new Roxon. I think that (properly calibrated) it's an alright tool, but I do think they it needed another layer of QC before leaving the factory. Contacted Roxon support, so I'll keep y'awl posted on the CS process.

-
Day 5
Didn't get a chance to post yesterday.

-
@BPRoberts said:
Day 5And as soon as I stick up for it, the Storm fails.
[attach id=0 msg=2499297]
That's the saw bent "backwards" past the stop after trying to take the lid off a pumpkin. I was able to force it back into position, but not without a lot of wobble.
The bit set that it comes with doesn't have the right bit (T10) but my bit set at the camper does, so I took out the screw (I do appreciate user serviceable tools) took the saw completely out, rinsed and wiped everything, and put it back together. It feels a lot better now than it did from the factory (smoother but tighter, and it seems to lock in better) so I'm wondering if there was an error in assembly. I adjusted several other screws on the tool and most of the tools feel better now, deploying better in spite of the fact that I tried to leave them as tight or tighter than I found them. Everything just feels lined up better.
I tested the saw on several branches around the camp site without issue. I guess the lesson here is to jimmy all the screws when you get a new Roxon. I think that (properly calibrated) it's an alright tool, but I do think they it needed another layer of QC before leaving the factory. Contacted Roxon support, so I'll keep y'awl posted on the CS process.
Oh no! :ahhh
I had to adjust my Flex screws to get it just where I wanted it. Let's see what they'll say.
-
Day 6
I also like the new KS with replaceable blades.

-
@BPRoberts said:
What do you dislike about it? Seems like a decent tanto to me.I like the Storm blade. It's a little small compared to the Phantom tanto. But it's still ok. I think it was the first multitool that I bought with a tanto blade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login