* Supertool Saturday *
-
Happy STS !

-
Excellent STS pics LC, David and Steve

-
Both old, both new

-
Happy Super Tool Saturday Awl.


-
Great pics, grouch and Alan 8)

Awesome turnout for STS

-
ST Saturday
Simple Black is always in style…
[attach id=0 msg=2499294]
-
Great pic Gordon !

-
Happy STS !


-
Thank you Steve!
And another classic combo.

-
Great STS pics, LC and Steve

-
I'll get a photo next time around...mine is due for some cleaning. -
They always look better with wear and grime!

-
SuperTool Saturday
I woke to my alarm and was greeted to a light drizzle and a notification on my phone that the battery was LOW on myQ, garage door sensor.
[attach id=0 msg=2500069]
ST300, flat blade opened the shell.
The blade cut the clam shell open to remove the battery from the package, much more difficult than need be!)
And the flat blade removed the old battery from the PCB jacket.Team work of one tool, multiple implements on a Saturday in October😎

-
@LoopCutter said:
SuperTool SaturdayI woke to my alarm and was greeted to a light drizzle and a notification on my phone that the battery was LOW on myQ, garage door sensor.
[attach id=0 msg=2500069]
ST300, flat blade opened the shell.
The blade cut the clam shell open to remove the battery from the package, much more difficult than need be!)
And the flat blade removed the old battery from the PCB jacket.Team work of one tool, multiple implements on a Saturday in October😎
Nicely done !

-
Happy STS !

-
Great STS photos, Gordon and Steve!

I'm a day late, as I was absolutely wiped out last night. But here are some ST300 photos nevertheless.
[attach id=0 msg=2500170]
[attach id=1 msg=2500170]
I thought it might be fun to show the tools that actually get used at work. So here we go!
Pliers: some 2024 Ford Explorers have a cartridge oil filter with three O-rings on its housing. The small one is a pain. ST300 pliers make it much easier to install.
Plain edge blade: used for general utility tasks that require something to be cut.
Large screwdriver: used to loosen and tighten the hose clamps on Ford air box tops.
Serrated blade: used to turn old pants into rags. (Thank God I wear a uniform to work!)
Phillips screwdriver: used to loosen and tighten screws holding GM air boxes together.
Fine screwdriver: used to remove the aforementioned small O-rings. Caution must be exercised when so doing.
The ST300 has been a valuable asset in my work!

.jpg)
.jpg)
-
The ST300 was my first tool I purchased! And, used almost daily in my parking construction & Service /Repair job.
It saved me many a step back to my company truck when onsite inspecting sites.
You have found a very good gig, and I hope it continues to be a good match and leads to other opportunities. DAN.
-
@Farmer X said:
Great STS photos, Gordon and Steve!
I'm a day late, as I was absolutely wiped out last night. But here are some ST300 photos nevertheless.
[attach id=0 msg=2500170]
[attach id=1 msg=2500170]
I thought it might be fun to show the tools that actually get used at work. So here we go!
Pliers: some 2024 Ford Explorers have a cartridge oil filter with three O-rings on its housing. The small one is a pain. ST300 pliers make it much easier to install.
Plain edge blade: used for general utility tasks that require something to be cut.
Large screwdriver: used to loosen and tighten the hose clamps on Ford air box tops.
Serrated blade: used to turn old pants into rags. (Thank God I wear a uniform to work!)
Phillips screwdriver: used to loosen and tighten screws holding GM air boxes together.
Fine screwdriver: used to remove the aforementioned small O-rings. Caution must be exercised when so doing.
The ST300 has been a valuable asset in my work!


-
Thanks, y'awl!

Last week, an animal control investigator came in for an oil change. I correctly deduced that he'd spent some time in the Marine Corps. We got to talking about our service, and I mentioned the Skeleton clipped to his vest. Upon seeing the ST300, he said, "you've got one of the good ones." He also said he misses his MUT.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login