Off-brand October Challenge
-
What do you dislike about it? Seems like a decent tanto to me.
-
Day 5
And as soon as I stick up for it, the Storm fails.
[attach id=0 msg=2499297]
That's the saw bent "backwards" past the stop after trying to take the lid off a pumpkin. I was able to force it back into position, but not without a lot of wobble.
The bit set that it comes with doesn't have the right bit (T10) but my bit set at the camper does, so I took out the screw (I do appreciate user serviceable tools) took the saw completely out, rinsed and wiped everything, and put it back together. It feels a lot better now than it did from the factory (smoother but tighter, and it seems to lock in better) so I'm wondering if there was an error in assembly. I adjusted several other screws on the tool and most of the tools feel better now, deploying better in spite of the fact that I tried to leave them as tight or tighter than I found them. Everything just feels lined up better.
I tested the saw on several branches around the camp site without issue. I guess the lesson here is to jimmy all the screws when you get a new Roxon. I think that (properly calibrated) it's an alright tool, but I do think they it needed another layer of QC before leaving the factory. Contacted Roxon support, so I'll keep y'awl posted on the CS process.

-
Day 5
Didn't get a chance to post yesterday.

-
@BPRoberts said:
Day 5And as soon as I stick up for it, the Storm fails.
[attach id=0 msg=2499297]
That's the saw bent "backwards" past the stop after trying to take the lid off a pumpkin. I was able to force it back into position, but not without a lot of wobble.
The bit set that it comes with doesn't have the right bit (T10) but my bit set at the camper does, so I took out the screw (I do appreciate user serviceable tools) took the saw completely out, rinsed and wiped everything, and put it back together. It feels a lot better now than it did from the factory (smoother but tighter, and it seems to lock in better) so I'm wondering if there was an error in assembly. I adjusted several other screws on the tool and most of the tools feel better now, deploying better in spite of the fact that I tried to leave them as tight or tighter than I found them. Everything just feels lined up better.
I tested the saw on several branches around the camp site without issue. I guess the lesson here is to jimmy all the screws when you get a new Roxon. I think that (properly calibrated) it's an alright tool, but I do think they it needed another layer of QC before leaving the factory. Contacted Roxon support, so I'll keep y'awl posted on the CS process.
Oh no! :ahhh
I had to adjust my Flex screws to get it just where I wanted it. Let's see what they'll say.
-
Day 6
I also like the new KS with replaceable blades.

-
@BPRoberts said:
What do you dislike about it? Seems like a decent tanto to me.I like the Storm blade. It's a little small compared to the Phantom tanto. But it's still ok. I think it was the first multitool that I bought with a tanto blade.
-
Owing to difficulties with Internetting, I'm only now seeing this thread. It's a shame that the Storm is at least in part a non-hacker. I'm following along!

-
Day 6
After the trauma yesterday, things were a bit easier for the Storm today. Double sided file is good:
[attach id=0 msg=2499485]
The bottle opener has great pull (gets the cap off in one go every time with ease) but you have to line up both of the two nubs, instead of just one:
[attach id=1 msg=2499485]


-
Day 7
I remember when Roxon only had the Storm. And now they have so many models and features, and different sizes. They've come a long way.

-
Coca-Cola in a glass bottle!

-
We call it Mexi-Coke here.
Day 7
Dropped a frozen tupperware and took off a corner. File took care of the sharp edges.

-
Day 8
Harnds Castor

-
Day 8
Roxon messaged me yesterday (seems fair, since it was the weekend when I sent in my initial message). All they needed was a pic of the tool, and they said they'd send me a fresh one. Obviously not great that the saw had the (easily fixed) issue, but that's some solid standing by your warranty. Will keep y'awl apprised, but hopefully all's well.
Meanwhile, gave the Ruike some action today. It's a beautiful apple slicer.

-
Day 9
Fixing lighter with ferro rod corroded in place

-
@BPRoberts said:
Day 8Roxon messaged me yesterday (seems fair, since it was the weekend when I sent in my initial message). All they needed was a pic of the tool, and they said they'd send me a fresh one. Obviously not great that the saw had the (easily fixed) issue, but that's some solid standing by your warranty. Will keep y'awl apprised, but hopefully all's well.
Meanwhile, gave the Ruike some action today. It's a beautiful apple slicer.
Way to go, Roxon! Awesome news.

-
Harnds Castor looks solid in that pic. I've always been curious how it performs for EDC tasks.
-
Day 9
Pliers helped remove a stubborn tamper seal on some sanitizer.

-
Day 10
I thought I'd put the file in the Flex. I line the scissors, but I have the Fiskars folding scissors on my keys, and they're great.

-
Day 10
Tested both pairs of scissors on the zipsties for this Gerber multi-spork. The Ruike really struggled, but the Roxon did well.
Honestly, I think I might buy that little can opener multi on its own if they sold it as a standalone, seems pretty nice. Will give it some tests at some point.

-
Day 11
Scissors.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login