What did you use your Sak on today?
-
The Philips head screwdriver on my Skipper was used to help swap out some bulbs in living room light fixtures. Can opener on my Tinker was used to open a soup can for lunch yesterday. Next, the package opener on Spirit was used to open the packaging of new house numbers last night. Lastly, Spirit pliers were used all weekend to pull nails and assorted fasteners from walls before house spackling and painting took place.
-
You've been busy! I can only hope all the projects go well.
-
Did some drilling, filing, chiseling, and awlso prying to install a deadbolt mechanism and fix the hinges. Always fun to use a hole saw and spade bits.
An alox cap lifter and small rubber mallet are just perfect for tapping out door hinge pins. Had to realign one of them with Spirit pliers and filed out the inside. It was scratching the pin and grinding? Somebody did a number to it in the last 50 years it’s been up there.
The chisel is just perfect to set the initial strike mortise and then bored out to depth my dremel. Set the initial screw placement with the Spirit awl and Phillips.
[attach id=0 msg=2496476]

-
The flat-tip driver end of the Champ's can opener came in handy to lever out some spacers, then the pliers pulled out the small nails that had been holding them in. (Sorry, no pics.)
-
I used my SwissTool pliers today to open some unopened pistachios. It might seem like I'm being cheap, but trust me, those unopened ones taste amazing! Plus, using the pliers from a MultiTool makes it so much easier
-
"Ivory" opened samples; opened snacks; cut loose string from shirt, all during today's Dr appointment. Then opened some refreshments to wash down lunch!
[attach id=0 msg=2497447]
-
Trooper has been on a shelf for some time now. I carried different things for the challenges, but now it's back to routine. Charged up the battery of the Cub one last time for the year, so it would crank. I went all summer with a failing battery. Putting it on a charger was easy as could be, so I figured I would do that as long as I could. Next year means a new battery. I cut down some high spots in the yard with the dregs of partially alcohol gasoline and ran it until it stopped. Then I put in some non-alcoholic gas and ran it a little more. Don't need any gummed up fuel lines.
Trooper came along for the ride. I saw several turkey feathers in the grass. They have been nibbling around my yard and in the field for days. There were six in one group. Once upon a time there were a couple of groups that had around 18 in each. I know there were two groups, because occasionally they both would show up in the same vicinity. Might need to post a turkey photo from yesterday. Best wishes. G
[attach id=0 msg=2499641] [attach id=1 msg=2499641].jpg)

-
Is turkey on the menu tonight? -
No fall turkey season here. I have had wild turkey before. Tastes just like store turkey, but no fat and tough like a rubber boot. I think I will just watch them and buy my turkey sandwich provender. Best wishes. G

-
I needed a Philips head in a pinch to remove some skirting screws on our window mount air conditioner. The only tool I had on me was my first mighty Minichamp, veteran of many a hike and quick fix. Out came the combo tool and mission accomplished! Don't try this at home


-
That 58mm combo tool is small, but mighty.
-
The MiniChamp and particularly its combo tool is one of the best and probably most underrated tools we can carry in our pocket. I love that screwdriver. And the scissors are surprisingly useful for their size and very well made.
-
I awlso have window A/C units. Central A/C is far preferable!
-
I agree! It's so handy tool to have in your pocket. It packs a big punch usefulness wise.
I agree Dan!
-
I used the scissors on my Spirit to cut some plastic sheeting for a paint project last week. Just now I used the Philips screwdriver on my Skipper to tighten some screws on a door stop on the bedroom door.
-
I used the pliers on my Champ to tighten a bolt holding a drawer pull. The bolt was loose, the Champ was in my pocket - problem solved!
-
I'm a decent enough painter, but it's not something I particularly enjoy. Good luck with all those projects!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login