Custom SAK - Inquiry
-
Hey folks,
I'm curious if it would be possible to create a knife that is essentially two layers. I am envisioning an inline phillips driver across from a blade and a combo tool. I am not sure about tool thickness nor about what spacers would be required to allow for the blade to pass the phillips driver, or even if such a two-in-one "layer" tool is possible.
I'm thinking that a configuration of /Liner/Blade/Spacer/Spacer/Combo Tool/Liner/ Opposite of /Liner/Spacer/Inline Phillips/Spacer/Liner/ may work? I imagine that some sanding would be necessary, and unless I harvest a combo tool from a 111mm Hunter, that I would need to drill out the combo tool to fit the pins.
Please let me know your thoughts, and if you know of any relevant threads! I made an account today because I have been mulling this over in my head for a while and I'd like to know if this is a possibility.
Addendum: I have read up enough to know that I would need separate backsprings for the knife and combo tool, and that drilling out any tools would depend on the size of knife (84mm uses 2.2mm outer pins, 91mm uses 2.5mm outer, 93 and 111mm liner locks use 3mm pins)
-
Welcome aboard!
I hope you’ll forgive me for being blunt when I say that I think you’re making this way more complicated than it needs to be.
You want a two-layer knife that contains a blade, combo tool, and inline Phillips…
Victorinox used to produce such a model. It was called the Scientist, but it is now discontinued and originals are relatively rare.
SAKWiki | Scientist
SAKWiki - The online Swiss Army Knife Encyclopedia. Information and Identification on Swiss Army Knives by Victorinox and Wenger.
SAKWiki (www.sakwiki.com)
Fortunately, you could build your own with parts from an Explorer and a Compact. Simply remove the opener layer and the scissors layer from the Explorer, and replace the Explorer’s small blade with the combo tool from the Compact.
-
@Sakurious said:
......
I am envisioning an inlinephillips driver across from a blade and a combo tool.
............ So why not go for a single layer SAK?

**Main layer: **Blade, Combo
**Back layer: **PhillipsI guess you want the inline Phillips - But if not - This would be a great minimalist SAK
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login