A Study of SeberTools; timeline considerations
-
Aloha
And your warm words always encourage me. Thank you very much !
(⌒∇⌒)GotBluntnose
I've found some material related to your post. Please keep an eye on this chapter until the end.
(*^ー゚)bcharlie fox
Thank you for showing us your wonderful I2SeberKnife.
Actually I do not have I2SeberKnife. I was having trouble getting those photos ready. You are great !
And I envy you…
(^p^)- Introduction
2. M2 SeberTool - M3 SeberTool
- M4 SeberTool
- I2 SeberKnife
- IDL Tools
- Summary
M2 SeberTool 1800GB Silver / 1850GB BlackThe silver model I have does not have "SEBERTOOL USA” engraved around the pivot. But I believe it is genuine because of it’s artistic combination of parts when folded.
Seber et al. US Patent 5,996,451 “Hand Tool with Sculpted Handles and Integral Key Ring” part of the documents. Filed Jan. 17, 1997, Date of Patent Dec. 7, 1999If they say “patented”, that means the product was made after December 1999.
Instruction paper of the M2 SeberTool.The description is written in six languages. The lower right is the Japanese version.
If you Look closely, you will see “(C) 1997 All rights reserved”. So I would guess M2 SeberTool was launched in 1997.
The clamshell packaging sold in Japan.One import distributor packaged and sold SeberTools on its own.
Japanese version of the instructions and warranty.If I accidentally break it, my tool will be sent from Japan to SeberTech headquarters in U.S. for repair. Of course, it is no longer valid. Not “Lifetime Warranty”, I am sad.
I looked everywhere and found only a few magazine articles and advertisements for SeberTool.
One of them is an ad in a Japanese magazine for a cutlery store.
Advertisement of Oyasu-ya. Knife Magazine No.66 (October 1997), Vol. 12, No. 5, p. 44
Number 55 and 56 are M2SeberTool. #53 Leatherman MICRA and #54 Swiss-Tech MicroTechnician are also pictured..I believe this is the first time SeberTool has been introduced in Japan. And this is consistent with the guess that M2 SeberTool was launched in 1997.
I also found an article about Harley Davidson models.
McLean, Don. “omega PROVING ground”. Soldier of fortune (February 1999). Vol. 24, No. 2, p61.
The product name was Harley-Davidson M2 MotorTool. There were two models, HD-7 and HD-8. The only difference between them seemed to be the position of the engraved logo.It is time to close this chapter.
Conclusion;
M2SeberTool was launchd in 1997. - Introduction
-
I've got an M4. I've had it so long I can't even remember where I got it.

-
PitCarver
Thank you for posting the picture. Nice vintage M4 !
Σ(゚Д゚ )Wow!!
Maybe it's a 20th century legacy… oh, forget about it. Please wait a few days because I would consider about it in the next chapter.- Introduction
- M2 SeberTool
3. M3 SeberTool - M4 SeberTool
- I2 SeberKnife
- IDL Tools
- Summary
M3 SeberTool 1900GB Silver / 1950GB Black
Instruction paper of the M3 SeberTool.The description is also written in six languages. The lower right is the Japanese version.
If you Look closely, you will see “(C) 1998 All rights reserved”. So I would guess M3 SeberTool was launched in 1998.But as you see, M4 SeberTool is also introduced in this instructions.
It is impossible to determine at this time whether the two models were released at the same time or whether these instructions were simply printed later than the M4 was released.M3 SeberTool was also available in the clamshell packaging in Japan. I forgot to tell you that which included the blue colored vinyl case and the key ring.
And M2 and M3 ware also available in a black plastic box similar to that of Swiss-Tech tools.
The M2 logo is painted red using permanent marker, seemed to distinguish from the M3.
Box art.
The box of SeberTool is bigger than that of Swiss-Tech. But no other accessories were included in this packaging.I found an ad in a Japanese magazine for a cutlery store, which seemed to be the first time the M3 has been introduced in Japan.
Advertisement of Oyasu-ya. Knife Magazine No.73 (December 1998), Vol. 13, No. 6, p. 42
Number 41 is the M2 SeberTool, and #42 is the M3.
Swiss-Tech #38 MicroTechnician, #39 MicroPlus and #40 Utili-Key are also pictured.
#43 is <u>Coleman Pro Lock</u>. This is another unusual tool. It is believed to have been launched around this time too.The M4 has not yet appeared in this ad. It seems safe to assume that the M4 will be launched later than 1998.
It is time to close this chapter.
Conclusion;
M3 SeberTool was launchd in 1998. -
- Introduction
- M2 SeberTool
- M3 SeberTool
4. M4 SeberToo - I2 SeberKnife
- IDL Tools
- Summary
M4 SeberTool 2000GB Silver / 2050GB Black
Packaging art of M4 SeberTool.The M4 was sold in a clear plastic box. But, oh no, I seem to have thrown it away.
Other than the instruction paper, there did not appear to be any accessories.
The instruction paper of M4.The description is also written in six languages.
If you Look closely, you will see “(C) 2000 All rights reserved”. So I would guess M4 SeberTool was launched in 2000.
So I would say this is one of the last multi-tools of the 20th century !I found an article about M3 and M4.
An unsigned article. “Adventure Quartermaster”. Soldier of Fortune (April 2000), Vo.25, No.4, p35, p37.I believe this article was written in connection with the new launch of the M4.
I consider this another evidence that the tool was launched in 2000.Were SeberTools more populer in the UK ?
I found SeberTech sponsoring a sporting event in the UK.
“Saunders Lakeland Mountain Marathon RESULTS”. 6th / 7th, July 2002And there was the website “www.sebertool.co.uk” which had sold SeberTools and is now closed.
This is a list of SeberTools features they have created.
“Technical Specs” crawled by The Wayback Machine in 19, January 2003.It is time to close this chapter.
Conclusion;
M4 SeberTool was launchd in 2000. -
- Introduction
- M2 SeberTool
- M3 SeberTool
- M4 SeberTool
5. I2 SeberKnife - IDL Tools
- Summary
Did I say that actually I don’t have I2 SeberKnife ?
Unfortunately it is true.
So the only thing I can do is post pics I get from the internet.
I2 Seber Knife 1500GB Silver / 1550GB Black
Image retrieved by Google from a Taiwanese site “https://www.police.com.tw/“.They seem to be selling it, but I don't know how to buy it.
I don't even have the instructions. So the method used previously to guess the release date cannot be used here.
But there are clues.
SeberTool.co.uk. “I2 SeberKnife”. crawled by the Wayback Machine at January 19, 2003.Note that this date is not the date the site was actually updated, but the date the Wayback Machine retrieved the data. And it is the oldest one I could find.
As you see, they said
we are the first web site in the world to carry the new I2 Sebertool.
So I can assume that the release date for I2 was around this time.
And remember the SeberTools were also sold at Keychain-Tools.com ?
Keychain-Tools.com “Swiss-Tech Multi-Tools [sic]”. crawled by the Wayback Machine at May 06, 2003.This data is also from 2003.
So I strongly suspect that the I2 was launched in 2003.
OK ?...Ah, a lot of question marks in this chapter.
It is time to close this chapter.
Conclusion;
I2 SeberKnife was launchd in 2003. -
I was going to post this image but made a mistake.
Keychain-Tools.com “SeberTech i2 SeberKnife”. crawled by the Wayback Machine at July 28, 2003. -
- Introduction
- M2 SeberTool
- M3 SeberTool
- M4 SeberTool
- I2 SeberKnife
6. IDL Tools - Summary
IDL T7 MultiTool 1900CP / SeberTech M3 SeberTool 1900GBThe T7 is the only tool I have made by IDL.
And this time, I have kept the card that came in the package.
The card that came in the T7 package.
There are no other accessories.If you Look closely, you will see “(C) 2007 All rights reserved”. So I would guess T7 MultiTool was launched in 2007.
And I know you will also see “Made in China to IDL Tools International specifications”, sighing deeply.Normally I would draw a conclusion here, but in this case I will continue the discussion a bit further.
IDL tools had got patents of SeberTool in 2005 and took over its manufacturing and sales. They used to post this information on their website.
IDL Tools International. “About IDL Tools ”. crawled by the Wayback Machine at November 29, 2010.In 2005, utilizing a subsidiary we acquired certain assets of SeberTech / Seber Inc.. These assets helped us to develop a family of products including the ViperGrip pliers, T-Tools keychain multi-tools, Sliver Ultra-thin knives and PowerShift Dual-stage snips.
In fact, they had been selling T10 MultiTool and other products on their website since 2005.
IDL Tools International. “Home”. crawled by the Wayback Machine at December 13, 2005.Me: “Your Honor, I request the appearance of an important witness before this Court !”
The President Judge: “Denied.”Oh... But here's an important testimonial that Poncho65 posted.
/post/128809Poncho65 said
I just went and checked mine ::)
It was USA M4 repacked in the IDL T10 package :ahhh :D
Sorry to hear that the newer ones aren't as good of quality :(
Thank you Poncho65, you are not guilty.
Based on these evidences, I believe that the IDL MultiTools had been on the market since 2005. Initially, it appears that IDL Tools was selling repacked USA products that SeberTech had in stock.
And it seems that the production in the Chinese factory started in 2007.See these excellent threads for related information.
”Serber and IDL keychain multi-tools” started by Chako
/topic/21516”Craftsman tools" started by scrappy
/topic/23669And of course Multitool Encyclopedia.
“Craftsman”
https://wiki.multitool.org/tiki-index.php?page=CraftsmanIt is time to close this chapter.
Conclusion;
IDL Multi-Purpose Tools was launchd in 2005. -
- Introduction
- M2 SeberTool
- M3 SeberTool
- M4 SeberTool
- I2 SeberKnife
- IDL Tools
**7. Summary
The "summary" is a summary.
It is a repetition of the previous, nothing more, nothing less.
Sorry.[b]Model** **Year** M2 SeberTool 1997 M3 SeberTool 1998 M4 SeberTool 2000 I2 SeberKnife 2003 IDL MultiTools 2005Thank you for your attention. :D
-
Great write up and walk down memory lane!! I have several Sebertool M4s from back in the day (early 2000's). I believe Ace Hardware used to carry them. I've long been a Leatherman user, having own a PST from sometime back in the 80's. The M4 was a great pocket tool for someone like me in the IT field. I rarely needed much more than my M4 to get most of my field work done without having to reach into my tool bag and the P1 tool was quite well made. Twice, I had the Phillips tool break at the joint (honestly it was the tool I used most often), the first time, Seber covered it under warranty, and the second time was long after Seber had gone out of business and IDL had taken over. I also owned a few IDL T10 tools and agree that the reproduction of the M4 was not anywhere near as good as the original. I was even in contact with IDL at one point and somehow got my hands on a batch of T10 "seconds", that I used to give out like candy to friends, family, etc.. Think I still have over a dozen left in a box somewhere, and I actually started carrying one again, as an EDC. I've long been a fan of compact pliers, like the Leatherman Squirt and PST, but for some reason, it's hard to find a quality mini-plier multitool at a reasonable price. I have a Gerber Dime, but that's hardly "quality" IMO.
-
I’m new. To mkduffler, would you sell me a few?
-
Might have better luck in the Trade Forums>Tools Needed section here. Best wishes. Gary

-
Back in the very early 2000’s I was a field tech in San Diego, and SeberTech had a down voicemail server. It was in their Vista CA building. I always hated these calls because the potential for lost data was huge and when I got there they were all kinds of hyper. 30 minutes later I had them up and running (lucky AF) and my contact was so appreciative I was able to save all their messages she went to the warehouse and returned with an M4 for me. It spent the last 20+ years in a toolbox drawer until the other day… had to look it up and found this thread. Interesting read… mine has an Eddie Bauer logo on one arm.

-
Is there modern high quality variant of this?
-
Opinions vary. Swiss +Tech makes similar multi tools. Quality can be hit or miss.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login